电磁软接触连铸圆坯表面振痕演变机理

金属学报

2009, Vol. 45

Issue (4): 464-469

论文

本期目录 | 过刊浏览

电磁软接触连铸圆坯表面振痕演变机理

许秀杰¹; 邓安元¹; 王恩刚¹;张林涛¹; 张兴武¹;张永杰²;赫冀成¹

1. 东北大学材料电磁过程研究教育部重点实验室; 沈阳 110004
2. 上海宝山钢铁股份有限公司; 上海 201900

EVOLVEMENT MECHANISM OF SURFACE OSCILLA- TION MARKS ON ROUND BILLET DURING SOFT–CONTACT ELECTROMAGNETIC CONTINUOUS CASTING

XU Xiujie ¹; DENG Anyuan ¹; WANG Engang ¹; ZHANG Lintao ¹; ZHANG Xingwu ¹;ZHANG Yongjie ²; HE Jicheng ¹

1. Key Laboratory of Electromagnetic Processing of Materials; Ministry of Education; Northeastern University;Shenyang 110004
2. Shanghai Baoshan Iron & Steel Co.; Ltd.; Shanghai 201900

引用本文:

许秀杰邓安元王恩刚张林涛张兴武张永杰赫冀成. 电磁软接触连铸圆坯表面振痕演变机理[J]. 金属学报, 2009, 45(4): 464-469.
, . EVOLVEMENT MECHANISM OF SURFACE OSCILLA- TION MARKS ON ROUND BILLET DURING SOFT–CONTACT ELECTROMAGNETIC CONTINUOUS CASTING[J]. Acta Metall Sin, 2009, 45(4): 464-469.

全文: PDF(1709 KB)

摘要:

在实验室立式连铸机上对碳素结构钢Q235B进行了电磁软接触连铸实验,测量了结晶器内磁场分布和Sn--Pb--Bi合金熔体弯月面形状. 结果表明,采用电磁软接触连铸技术, 可以显著改善铸坯表面质量; 当电源功率达到最佳值时, 振痕完全受到抑制, 铸坯表面光洁; 但当电源功率过大时,铸坯表面出现波浪形振痕. 分析认为, 铸坯表面质量得到改善是高频电磁场的Lorentz力效应和Joule热效应共同作用的结果;当电源功率过大时, 分瓣结晶器内的磁场分布不均匀,沿结晶器周向呈波浪形分布, 加之钢水液面波动也更加剧烈,因此在铸坯表面产生波浪形振痕.

关键词 ：连铸结晶器, 软接触, 电磁场, 弯月面, 初始凝固

Abstract：

In the steel industry, the continuous casting product is usually a pre–produt before being fed to hot rolling mill, which brings in high cost and ollution and low productivity. So a new technology is demanded urgently to produce surface defect free billets and slabs. The success of electromagnetic casting (EMC) technology utilized in aluminum casting to improve surface quality enlightens the metallurgical researchers to apply this novel technology into production of steel. An experiment using high frequency magnetic field (26 kHz) was carried out on a vertical type caster with a segmented copper mold in our laboratory. Carbon structural steel (0.20% C, mass fraction) was used as experimental material. A special power was used to provide high frequency current to an induction coil surrounding the segmented mold. Moreover, the distribution of magnetic field and meniscus shape of Sn–Pb–Bi alloy in the mold were investigated and used to explain the phenomena happened in the initial solidification area in the case of EMC. The result shows that oscillations marks (OMs) can be totally suppressed and the surface of round billets with EMC technology becomes extremely smooth compared to the billets without EMC technology when the output power comes to an optimal one. According to the conventional mechanism of OM formation, the pressure generated in the flux channel due to the relative movement between solid flux rim and molten steel pool plays an important role in the formation of OMs. In the case of EMC, the solid flux rim becomes smaller as temperatures of mold and liquid steel in the initial solidification area increase because of Joule heat generated by the high frequency magnetic field, and the flux channel turns wider as Lorentz force is imposed on the liquid steel. As a result, the flux pressure becomes smaller, which makes the billets have better surface quality. However, when the powder exceeds the optimal value, the distribution of initial solidification starting point along the mold perimeter behaves in a wavy pattern. Simultaneously, the free surface of molten steel fluctuates more greatly, resulting in formation of OMs. As a conclusion, the formations of wavy OMs on the round billet surface are resulted from non–homogeneity of magnetic field between slit center and segment center as well as fluctuation of liquid steel level.

Key words： continuous casting mold soft--contact electromagnetic field meniscus initial solidification

收稿日期: 2008-06-03

ZTFLH:

TF777

基金资助:

国家自然科学基金项目50604005、国家高技术研究发展计划项目2001AA337040、高等学校学科创新引智计划项目B07015和辽宁省青年人才基金2005221004资助

作者简介: 许秀杰, 男, 1981年生, 博士生

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	许秀杰
	王恩刚
44.8K

链接本文:

https://www.ams.org.cn/CN/ 或 https://www.ams.org.cn/CN/Y2009/V45/I4/464

[1] Getslev Z N. US Pat, ZL 3467166, 1969
[2] Viv`es C. Metall Trans, 1989; 20B: 623
[3] Miyoshino I, Takeuchi E, Yano H, Sakane J, Saeki T, Kajioka H. ISIJ Int, 1989; 29: 1040
[4] Li T J, Nagaya S, Sassa K, Asai S. Metall Trans, 1995; 26B: 353
[5] Li T J, Sassa K, Asai S. ISIJ Int, 1996; 36: 410
[6] Cho Y W, Oh Y J, Chung S H, Shim J D. ISIJ Int, 1998; 38: 723
[7] Park J, Sim D, Jeong H, Kim H, Kim J. CAMP–ISIJ, 1999; 12: 57
[8] Kim H, Park J, Jeong H , Kim J. ISIJ Int, 2002; 42: 171
[9] Ren Z M, Dong H F, Deng K, Jiong G C. ISIJ Int, 2001; 41: 981
[10] Toh T, Takeuchi E, Hojo M, Kawai H, Matsumura S. ISIJ Int, 1997; 37: 1112
[11] Park J, Jeong H, Kim H, Kim J. ISIJ Int, 2002; 42: 385
[12] Sumi I, Shimizu H, Nishioka S, Nakata M, Murakami K, Suzuki M. ISIJ Int, 2003; 43: 807
[13] Yu G W, Jia G L, Wang E G, Hu Y, He J C, Zhang Y J, Chen Z P, Zhou Y M. Iron Steel, 2002; 37(5): 19
(于光伟, 贾光霖, 王恩刚, 胡yun , 赫冀成,张永杰, 陈兆平, 周月明. 钢铁, 2002; 37(5): 19)
[14] Li T J, Li X T, Zhang Z F, Jin J Z. Ironmaking Steelmaking, 2006; 33: 57
[15] Nakata H, Inoue T, Mori H, Ayata K, Murakami T, Kominami T. ISIJ Int, 2002; 42: 264
[16] Park J, Kim H, Jeong H, Kim G, Cho M J, Chung J S, Yoon M, Kim K R, Choi J. ISIJ Int, 2003; 43: 813
[17] Yu G W, Jia G L, Wang E G, He J C, Zhang Y J, Chen Z P. Acta Metall Sin, 2002; 38: 208
(于光伟, 贾光霖, 王恩刚, 赫冀成, 张永杰, 陈兆平. 金属学报, 2002; 38: 208)
[18] Deng A Y, Wang E G, He J C, Meng G H, Zhang Y J, Chen Z P, Zhou Y M. Acta Metall Sin, 2003, 39: 1105
(邓安元, 王恩刚, 赫冀成, 孟广辉, 张永杰, 陈兆平, 周月明. 金属学报, 2003; 39: 1105)
[19] Yu G W, Jia G L, Wang E G, Li B W, He J C. Acta Metall Sin, 2000; 36: 1253
(于光伟, 贾光霖, 王恩刚, 李本文, 赫冀成. 金属学报, 2000; 36: 1253)
[20] Chen Z H, Wang E G, Zhang X W, He J C. Iron Steel, 2006; 41(12): 27
(陈芝会, 王恩刚, 张兴武, 赫冀成. 钢铁, 2006; 41(12): 27)

[21] Chen J X. Manual of Continuous Casting. Beijing: Metallurgical Industry Press, 1995: 87
(陈家祥. 连续铸钢手册. 北京: 冶金工业出版社, 1995: 87)
[22] Ren B Z, Zhu M Y, Wang H D, Chen Y. Acta Metall Sin, 2008; 44: 509
(任兵芝, 朱苗勇, 王宏丹, 陈永. 金属学报, 2008; 44: 509)
[23] Takeuchi E, Brimacombe J K. Metall Trans, 1984; 15B: 493
[24] Sengupta J, Thomas B G, Shin H J, Lee G G, Kim S H. Metall Meter Trans, 2006; 37A: 1597

[1]	刘中秋, 李宝宽, 肖丽俊, 干勇. 连铸结晶器内高温熔体多相流模型化研究进展[J]. 金属学报, 2022, 58(10): 1236-1252.
[2]	唐海燕, 刘锦文, 王凯民, 肖红, 李爱武, 张家泉. 连铸中间包加热技术及其冶金功能研究进展[J]. 金属学报, 2021, 57(10): 1229-1245.
[3]	任忠鸣,雷作胜,李传军,玄伟东,钟云波,李喜. 电磁冶金技术研究新进展[J]. 金属学报, 2020, 56(4): 583-600.
[4]	陶然, 赵玉涛, 陈刚, 怯喜周. 电磁场下原位合成纳米ZrB_{2 np}/AA6111复合材料组织与性能研究[J]. 金属学报, 2019, 55(1): 160-170.
[5]	龚永勇, 程书敏, 钟玉义, 张云虎, 翟启杰. 脉冲磁致振荡凝固技术[J]. 金属学报, 2018, 54(5): 757-765.
[6]	王强, 何明, 朱晓伟, 李显亮, 吴春雷, 董书琳, 刘铁. 电磁场技术在冶金领域应用的数值模拟研究进展[J]. 金属学报, 2018, 54(2): 228-246.
[7]	王菲,王恩刚,贾鹏,王韬,邓安元. 电磁连铸对Incoloy800H合金铸坯内TiN分布和内裂纹的影响[J]. 金属学报, 2017, 53(1): 97-106.
[8]	侯晓光,王恩刚,许秀杰,邓安元,王万林. 弯月面热障涂层方法对结晶器传热及铸坯振痕形貌的影响[J]. 金属学报, 2015, 51(9): 1145-1152.
[9]	毕成, 郭志鹏, LIOTTI E, 熊守美, GRANT P S. 铝合金凝固过程枝晶破碎现象的定量化研究^*[J]. 金属学报, 2015, 51(6): 677-684.
[10]	高中堂, 胡锐, 王军, 杨劼人, 李金山. 电磁场下近液相线高温合金熔体处理非枝晶组织的形成[J]. 金属学报, 2014, 50(12): 1471-1477.
[11]	刘中秋,李宝宽,姜茂发,张立,徐国栋. 连铸结晶器内氩气/钢液两相非稳态湍流特性的大涡模拟研究[J]. 金属学报, 2013, 49(5): 513-522.
[12]	贾鹏,王恩刚,鲁辉,赫冀成. 电磁场对Inconel 625合金凝固组织及力学性能的影响[J]. 金属学报, 2013, 49(12): 1573-1580.
[13]	陈芝会王恩刚张兴武王元华朱明伟赫冀成. 行波磁场下吹Ar过程中结晶器内气泡行为的研究[J]. 金属学报, 2012, 48(8): 951-956.
[14]	李宝宽刘中秋齐凤升王芳徐国栋. 薄板坯连铸结晶器非稳态湍流大涡模拟研究[J]. 金属学报, 2012, 48(1): 23-32.
[15]	金小礼雷作胜于湛张浩斌邓康任忠鸣. Ar气泡在连铸坯固/液界面处运动行为的物理模拟研究[J]. 金属学报, 2011, 47(6): 763-768.

Viewed

Full text

Abstract

Cited

Shared

Discussed