Please wait a minute...
金属学报  2005, Vol. 41 Issue (9): 910-916     
  论文 本期目录 | 过刊浏览 |
α-LaNi5H0.5与β-LaNi5H3的全电子计算
齐新华 高 涛 陈 波
四川大学原子与分子物理研究所;成都 610065
FULL-ELECTRON CALCULATION OF α-LaNi5H0.5 and β-LaNi5H3
QI Xinhua; GAO Tao; CHEN Bo
Institute of Atomic and Molecular Physics; Sichuan University; Chengdu 610065
引用本文:

齐新华; 高涛; 陈波 . α-LaNi5H0.5与β-LaNi5H3的全电子计算[J]. 金属学报, 2005, 41(9): 910-916 .
, , . FULL-ELECTRON CALCULATION OF α-LaNi5H0.5 and β-LaNi5H3[J]. Acta Metall Sin, 2005, 41(9): 910-916 .

全文: PDF(268 KB)  
摘要: 在全电子水平上,基于广义梯度近似密度泛函和全势线性缀加平面波方法,计算出了LaNi5储氢合金固溶相α-LaNi5H0.5与中间相β-LaNi5H3的晶体结构、态密度和电荷密度等特征. 在α相区域中,通过对5种不同间隙位置的能量计算得到12n位最稳定;点阵常数a随着H原子增多而增大,而c基本为一常数. 在α→β相区域中,a值随着H原子的增多进一步增大,而c值增大相对较小. 计算值与实验结果一致.
关键词 La-Ni-H     
Abstract:Based on the generalized gradient approximation (GGA) of density function and the full-potential linearized augmented plane wave (FLAPW) method, the equilibrium structure and density of states were calculated for the primary solid solution phase α-LaN5H0.5 and the intermediate phase β-LaNi5H3. In the α-phase region, 12n site is the most stable position in five nonequivalent interstices; with increasing H atoms the cell parameter a axis increases, while the c axis is constant. In the α→β region, with increasing H atoms a large increase in the a$ axis and a relatively small increase in the c axis are concluded. The charge density and density of states are also calculated for the intermediate phase.
Key wordsLa-Ni-H compound    primary solid solution phase
收稿日期: 2005-01-20     
ZTFLH:  TG139,TG111  
[1] Flanagan T B, Wulff C A, Bowerman B S. J Solid State Chem, 1980; 34: 215
[2] Murray J J, Post M L, Taylor J B. J Less-Common Met, 1981; 80: 211
[3] Feng Z K, Yang H X, Jiao Y L, Ma Z Q. Rare Met Mater Eng, 1990; (1): 59 (冯治库,杨宏秀,焦玉琏,马忠乾.稀有金属材料与工程,1990; (1):59)
[4] Fischer P, Furrer A, Busch G, Schlapbach L. Phys Acta, 1977; 50: 421
[5] Soubeyroux J L, Percheron-Guegan A, Achard J C. J Less-Common Met, 1987; 129: 181
[6] Kisi E H, Gray E M A, Kennedy S J. J Alloys Compd, 1994; 216: 213
[7] Hempelmann R, Richter D, Eckold G. J Less-Common Met, 1984; 104: 1
[8] Nakamura H, Nguyen-Manh D, Pettifor D G. J Alloys Compd, 1998; 281: 81
[9] Tatsumi K, Tanaka I, Inui H, Tanaka K, Yamaguchi M, Adachi H. Phys Rev, 2001; 64B: 184105
[10] Nomura K, Uruno H, Shinozuka H, Suda S, Ono S. J LessCommon Met, 1985; 107: 221
[11] Akiba E, Nomura K, Ono S. J Less-Common Met, 1987; 129: 159
[12] Ono S, Nomura K, Akiba E. J Leas-Common Met, 1985; 113: 113
[13] Akiba E, Hayakawa H, Ishido Y, Nomura K. Phys Chem, 1989; 163: 291
[14] Van Vucht J H N, Kuipers F A, Bruning H C M.Philips Res Rep,1970;25:133
[15] Blaha P,Schwarz K, Madsen G K H, Kvasnicka D, Luitz J. Computer Code WIEN2K, An Augmented Plane Wave Plus Local Orbital Program for Calculating Crystal Properties, Vienna, Austria: Vienna University of Technology, 2001
[16] Westlake D G. J Less-Common Met, 1983; 90: 251
[17] Qi X H, Gao T, Zhu Z H. J Atom Mol Phys, 2004; 21: 366 (齐新华,高 涛,朱正和.原子与分子物理学报,2004;21: 366)
[18] Guo J, Wei W L, Ma S Y. Acta Metall Sin, 2003; 39: 10 (郭进,韦文楼,马树元.金属学报, 2003;39:10)w
[1] 刘俊鹏, 陈浩, 张弛, 杨志刚, 张勇, 戴兰宏. 高熵合金的低温塑性变形机制及强韧化研究进展[J]. 金属学报, 2023, 59(6): 727-743.
[2] 李谦, 孙璇, 罗群, 刘斌, 吴成章, 潘复生. 镁基材料中储氢相及其界面与储氢性能的调控[J]. 金属学报, 2023, 59(3): 349-370.
[3] 苗军伟, 王明亮, 张爱军, 卢一平, 王同敏, 李廷举. AlCr1.3TiNi2 共晶高熵合金的高温摩擦学性能及磨损机理[J]. 金属学报, 2023, 59(2): 267-276.
[4] 陈斐, 邱鹏程, 刘洋, 孙兵兵, 赵海生, 沈强. 原位激光定向能量沉积NiTi形状记忆合金的微观结构和力学性能[J]. 金属学报, 2023, 59(1): 180-190.
[5] 韩录会, 柯海波, 张培, 桑革, 黄火根. 非晶态U60Fe27.5Al12.5 合金的晶化动力学行为[J]. 金属学报, 2022, 58(10): 1316-1324.
[6] 程坤 陈树明 曹烁 刘建荣 马英杰 范群波 程兴旺 杨锐 胡青苗. 第一性原理研究钛合金中的沉淀强化[J]. 金属学报, 0, (): 0-0.
[7] 刘帅帅, 侯超楠, 王恩刚, 贾鹏. Zr61Cu25Al12Ti2Zr52.5Cu17.9Ni14.6Al10Ti5 块体非晶合金过冷液相区的塑性流变行为[J]. 金属学报, 2022, 58(6): 807-815.
[8] 张金勇, 赵聪聪, 吴宜谨, 陈长玖, 陈正, 沈宝龙. (Fe0.33Co0.33Ni0.33)84 -x Cr8Mn8B x 高熵非晶合金薄带的结构特征及其晶化行为[J]. 金属学报, 2022, 58(2): 215-224.
[9] 朱敏, 欧阳柳章. 镁基储氢合金动力学调控及电化学性能[J]. 金属学报, 2021, 57(11): 1416-1428.
[10] 左良, 李宗宾, 闫海乐, 杨波, 赵骧. 多晶Ni-Mn-X相变合金的织构化与功能行为[J]. 金属学报, 2021, 57(11): 1396-1415.
[11] 杨群, 彭思旭, 卜庆周, 于海滨. 非晶态Ni80P20合金的玻璃转变和过冷液体性质[J]. 金属学报, 2021, 57(4): 553-558.
[12] 毕甲紫, 刘晓斌, 李然, 张涛. 非晶合金粉末作为润滑油添加剂的摩擦学性能[J]. 金属学报, 2021, 57(4): 559-566.
[13] 屈瑞涛, 王晓地, 吴少杰, 张哲峰. 金属玻璃的剪切带变形与断裂机制研究进展[J]. 金属学报, 2021, 57(4): 453-472.
[14] 潘杰, 段峰辉. 非晶合金的回春行为[J]. 金属学报, 2021, 57(4): 439-452.
[15] 李宁, 黄信. 块体非晶合金的3D打印成形研究进展[J]. 金属学报, 2021, 57(4): 529-541.