Please wait a minute...
金属学报  2026, Vol. 62 Issue (10): 1737-1748    DOI: 10.11900/0412.1961.2025.00023
  研究论文 本期目录 | 过刊浏览 |
镁离子电池用Mg-0.1Sn负极材料的组织特征和电化学行为
李瑜1, 程伟丽1,2(), 穆映洲2, 王利飞1, 王红霞1, 崔泽琴1, 张全福2, 宋蕾2, 余晖3
1 太原理工大学 材料科学与工程学院 太原 030024
2 孝义市东义镁业有限公司 山西省多功能镁合金成型创新技术中心 孝义 032308
3 河北工业大学 材料科学与工程学院 天津 300132
Microstructural Characteristics and Electrochemical Behavior of a Mg-0.1Sn Anode for Magnesium-Ion Batteries
LI Yu1, CHENG Weili1,2(), MU Yingzhou2, WANG Lifei1, WANG Hongxia1, CUI Zeqin1, ZHANG Quanfu2, SONG Lei2, YU Hui3
1 School of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China
2 Technology Innovation Center of Forming in Multifunctional Mg Alloys of Shanxi Province, Xiaoyi Dongyi Magnesium Industry Co. Ltd., Xiaoyi 032308, China
3 School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300132, China
引用本文:

李瑜, 程伟丽, 穆映洲, 王利飞, 王红霞, 崔泽琴, 张全福, 宋蕾, 余晖. 镁离子电池用Mg-0.1Sn负极材料的组织特征和电化学行为[J]. 金属学报, 2026, 62(10): 1737-1748.
Yu LI, Weili CHENG, Yingzhou MU, Lifei WANG, Hongxia WANG, Zeqin CUI, Quanfu ZHANG, Lei SONG, Hui YU. Microstructural Characteristics and Electrochemical Behavior of a Mg-0.1Sn Anode for Magnesium-Ion Batteries[J]. Acta Metall Sin, 2026, 62(10): 1737-1748.

全文: PDF(2321 KB)   HTML
摘要: 

镁离子电池凭借其高体积比容量和安全性,具有成为新型储能系统的优异潜力。然而,纯Mg阳极的不均匀剥离和较大的过电位会导致严重的点蚀穿孔,从而导致其失效。本工作通过挤压工艺制备出一种具有均质等轴晶组织的Mg-0.1Sn (质量分数,%)负极材料,从而实现了均匀且快速的Mg沉积/剥离过程。在电流密度为1 mA/cm2、沉积容量为0.5 mA⋅h/cm2的条件下,过电位仅为0.21 V,且完成了1000 cyc循环。此外,与Mo6S8正极相匹配,组成的全电池在充放电倍率1 C下可循环1800 cyc,表现出较好的循环稳定性。其优异的循环稳定性主要是由于Sn元素均匀固溶在Mg基体中,并参与了充、放电循环过程,有效缓解了体积膨胀,抑制了微裂纹扩展,同时表面形成的SnCl2降低了局部Cl-的浓度,减缓了电解液的腐蚀。

关键词 : 镁离子电池,  Mg-Sn合金,  微观组织,  电化学性能    
Abstract:

With the global emphasis on renewable energy, the development of large-scale energy storage technologies has become essential for achieving carbon neutrality. Lithium-ion batteries (LIBs) are currently the most widely used and technologically mature energy storage systems; however, resources such as Li, Co, and Ni are scarce in China, resulting in high production costs. Moreover, the growth of lithium dendrites poses serious safety risks, as these structures can penetrate the separator, cause short circuits, and potentially lead to thermal runaway, fires, or explosions. In light of these challenges, while significant progress has been made in developing protection strategies for LIBs, researchers are increasingly exploring alternative metal-ion battery systems, including magnesium-ion, sodium-ion, and zinc-ion batteries. Among these, rechargeable magnesium-ion batteries (MIBs) are considered one of the most promising next-generation energy storage technologies. Compared with metallic Li, metallic Mg offers a higher volumetric capacity and a relatively low reduction potential. In addition, Mg is more abundant in the Earth's crust and theoretically resistant to dendrite formation under appropriate conditions due to its low self-diffusion barrier. Its chemical stability in air and lower flammability also contribute to improved operational safety. MIBs thus present a promising route toward safe, high-capacity energy storage. However, challenges such as uneven stripping and high overpotential at the Mg anode lead to pitting corrosion and premature failure. To address these issues, a Mg-0.1Sn (mass fraction, %) anode material with a homogeneous equiaxed structure was prepared via extrusion, yielding an average grain size of (15.6 ± 2.4) μm and a texture strength of 17.40 MRD. The electrochemical performance of this alloy was compared with that of a pure Mg anode to achieve more uniform and rapid Mg deposition/stripping behavior. At a current density of 1.0 mA/cm2 and a deposition capacity of 0.5 mA⋅h/cm2, the overpotential of the T0//T0 symmetric cell was only 0.21 V, maintaining stable operation for up to 1000 cyc, whereas the P-Mg//P-Mg cell sustained only 505 cyc. The T0//Cu half-cell also exhibited excellent cycling stability for over 450 cyc with an average coulombic efficiency of 98.88%. In contrast, after 230 cyc, the coulombic efficiency of the P-Mg//Cu cell fluctuated significantly and remained comparatively low. Furthermore, when paired with a Mo6S8 cathode, the T0//Mo6S8 full cell maintained good cycling stability for over 1800 cyc at a rate of 1 C. The superior cycling performance of the Mg-0.1Sn anode is attributed primarily to the uniform solid solution of Sn within the Mg matrix. Furthermore, the Sn component participates in the charge-discharge processes, effectively mitigating volume expansion and suppressing microcrack propagation. Meanwhile, the formation of SnCl2 on the anode surface reduces the local Cl- concentration, thereby slowing electrolyte corrosion and enhancing overall electrode stability.

Key words: magnesium-ion battery    Mg-Sn alloy    microstructure    electrochemical performance
收稿日期: 2025-01-17     
ZTFLH:  TM912  
基金资助:国家自然科学基金项目(52375370);山西省自然科学基金项目(202103021224049);山西省-浙江大学新材料与化工研究院技术开发项目(2022SX-TD025);吕梁市校地合作重点研发专项项目(2023XDHZ09)
通讯作者: 程伟丽,chengweili7@126.com,主要从事先进镁基材料开发及性能调控的研究
Corresponding author: CHENG Weili, professor, Tel: (0351)6010021, E-mail: chengweili7@126.com
作者简介: 李 瑜,女,1996年生,硕士生
图1  Mg-0.1Sn (T0)合金的晶粒取向图、晶粒尺寸分布图、(0001)极图、局部取向差(KAM)图、XRD谱和SEM像,及纯Mg极片(P-Mg)的OM像、SEM像和晶粒尺寸分布图
图2  T0合金的HAADF像和相应的元素面扫描图
图3  不同电流密度和沉积容量下P-Mg//P-Mg和T0//T0对称电池的沉积-溶解曲线和沉积容量为1.0 mA⋅h/cm2时不同电流密度下的倍率性能
图4  P-Mg//Cu和T0//Cu半电池首圈循环伏安曲线和Coulombic效率(CE)图
图5  在电流密度为1.0 mA/cm2、沉积容量为0.5 mA⋅h/cm2下循环0、20、200和300 h后P-Mg和T0合金负极表面和截面的SEM像
图6  T0合金负极在电流密度为1.0 mA/cm2、沉积容量为0.5 mA⋅h/cm2条件下循环200和300 h后的SEM像和EDS元素面分布图
图7  P-Mg和T0合金负极在电流密度为1 mA/cm2、沉积容量为0.5 mA⋅h/cm2条件下循环30 h后的XPS
图8  T0//T0和P-Mg//P-Mg对称电池不同循环阶段的电化学阻抗谱(EIS)和等效电路图
CellCycle number / cyc

Rs

Ω

RSEI

Ω

Rct

Ω

P-Mg//P-Mg5017.824.6318.4
15019.033.1950.0
20019.841.51006.0
30021.139.41182.0
T0//T05020.420.9171.5
15021.526.0256.1
20022.326.8416.6
30022.433.9604.4
表1  T0//T0和P-Mg//P-Mg对称电池的EIS拟合结果
图9  Mo6S8的XRD谱和晶体结构、T0//Mo6S8和P-Mg//Mo6S8全电池不同循环阶段的充放电曲线、充放电倍率1 C下的循环性能和CE图及倍率性能
[1] Hu D N, Huang S, Wen Z, et al. A review on thermal runaway warning technology for lithium-ion batteries[J]. Renew. Sustain. Energy Rev., 2024, 206: 114882
doi: 10.1016/j.rser.2024.114882
[2] Jia Z Z, Jin K Q, Mei W X, et al. Advances and perspectives in fire safety of lithium-ion battery energy storage systems[J]. eTransportation, 2025, 24: 100390
doi: 10.1016/j.etran.2024.100390
[3] Sun J L, Zhou H H, Huang Z H. The future nickel metal supply for lithium-ion batteries[J]. Green Chem., 2024, 26: 6926
doi: 10.1039/D4GC01980F
[4] Zhang J Y, Huang H N, Zhang G Q, et al. Cycle life studies of lithium-ion power batteries for electric vehicles: A review[J]. J. Energy Storage, 2024, 93: 112231
doi: 10.1016/j.est.2024.112231
[5] Luo Z H, Zhang D, Guo J X, et al. Recent progress on the materials design towards thermally safe sodium-ion batteries[J]. J. Energy Chem., 2025, 102: 555
doi: 10.1016/j.jechem.2024.11.014
[6] You C L, Wu X W, Yuan X H, et al. Advances in rechargeable Mg batteries[J]. J. Mater. Chem., 2020, 8A: 25601
[7] Zhang H, Zhang M, Xu T, et al. Ions and electrons dual transport channels regulated by nanocellulose for mitigating dendrite growth of zinc-ion batteries[J]. Chem. Eng. J., 2025, 505: 159476
doi: 10.1016/j.cej.2025.159476
[8] Mohtadi R, Tutusaus O, Arthur T S, et al. The metamorphosis of rechargeable magnesium batteries[J]. Joule, 2021, 5: 581
doi: 10.1016/j.joule.2020.12.021
[9] Tan S S, Xiong F Y, Wang J J, et al. Crystal regulation towards rechargeable magnesium battery cathode materials[J]. Mater. Horiz., 2020, 7: 1971
doi: 10.1039/D0MH00315H
[10] Wan B X, Dou H L, Zhao X L, et al. Three-dimensional magnesiophilic scaffolds for reduced passivation toward high-rate mg metal anodes in a noncorrosive electrolyte[J]. ACS Appl. Mater. Interfaces, 2020, 12: 28298
doi: 10.1021/acsami.0c07213
[11] Wen T T, Xiao H, Tan S S, et al. Interfacial chemistry of anode/electrolyte interface for rechargeable magnesium batteries[J]. J. Magnes. Alloy., 2024, 12: 2647
doi: 10.1016/j.jma.2024.04.010
[12] Xu R J, Gao X, Chen Y, et al. Research advances of the electrolytes for rechargeable magnesium ion batteries[J]. Mater. Today Phys., 2023, 36: 101186
[13] Setiawan D, Lee H, Pyun J, et al. Magnesium alloys as alternative anode materials for rechargeable magnesium-ion batteries: Review on the alloying phase and reaction mechanisms[J]. J. Magnes. Alloy., 2024, 12: 3476
doi: 10.1016/j.jma.2024.09.018
[14] Song M J, Wang Y, Yu B, et al. A high-performance room-temperature magnesium ion battery with self-healing liquid alloy anode mediated with a bifunctional intermetallic compound[J]. Chem. Eng. J., 2022, 450: 138176
doi: 10.1016/j.cej.2022.138176
[15] Tan Y H, Yao W T, Zhang T W, et al. High voltage magnesium-ion battery enabled by nanocluster Mg3Bi2 alloy anode in noncorrosive electrolyte[J]. ACS Nano, 2018, 12: 5856
doi: 10.1021/acsnano.8b01847
[16] Zheng K, Yu B, Ma W S, et al. Dealloying induced porous Bi anodes for rechargeable magnesium-ion batteries[J]. J. Power Sources, 2024, 613: 234943
doi: 10.1016/j.jpowsour.2024.234943
[17] Zheng X W, Song C, Yuan Y, et al. High stability In-Sn-Bi multi-element alloy anode for Mg ion batteries[J]. J. Power Sources, 2023, 575: 233141
doi: 10.1016/j.jpowsour.2023.233141
[18] Gu D C, Yuan Y, Liu J W, et al. The electrochemical properties of bismuth-antimony-tin alloy anodes for magnesium ion batteries[J]. J. Power Sources, 2022, 548: 232076
doi: 10.1016/j.jpowsour.2022.232076
[19] Liu H, Tan S S, Wang Z T, et al. Binary Mg-1 at%Gd alloy anode for high-performance rechargeable magnesium batteries[J]. ChemSusChem 2024, 17: e202301589
doi: 10.1002/cssc.v17.4
[20] Chen X Z, Wei S H, Tong F L, et al. Electrochemical performance of Mg-Sn alloy anodes for magnesium rechargeable battery[J]. Electrochim. Acta, 2021, 398: 139336
doi: 10.1016/j.electacta.2021.139336
[21] Chen X Z, Wei S H, Yan Y G, et al. Dissolution mechanism of eutectic and hypereutectic Mg-Sn alloy anodes for magnesium rechargeable batteries[J]. ACS Appl. Mater. Interfaces, 2023, 15: 33065
doi: 10.1021/acsami.3c03591
[22] Mandai T, Somekawa H. Metallurgical approach to enhance the electrochemical activity of magnesium anodes for magnesium rechargeable batteries[J]. Chem. Comm., 2020, 56: 12122
doi: 10.1039/D0CC05373B
[23] Chen Y H, Shen X, Wang J F, et al. Insights into hyper-efficient construction of compact artificial SEI for highly reversible Mg metal anode[J]. ACS Energy Lett., 2024, 9: 5616
doi: 10.1021/acsenergylett.4c02123
[24] Eaves-Rathert J, Moyer K, Zohair M, et al. Kinetic- versus diffusion-driven three-dimensional growth in magnesium metal battery anodes[J]. Joule, 2020, 4: 1324
doi: 10.1016/j.joule.2020.05.007
[25] Nguyen D T, Tran X M, Kang J, et al. Magnesium storage performance and surface film formation behavior of tin anode material[J]. ChemElectroChem, 2016, 3: 1813
doi: 10.1002/celc.v3.11
[26] Claus P, Raif F, Cavet S, et al. From molecule to material: Mg2Sn as hydrogenation catalyst[J]. Catal. Commun., 2006, 7: 618
doi: 10.1016/j.catcom.2006.01.027
[27] Chen X Z, Bleken F L, Løvvik O M, et al. Comparing electrochemical performance of transition metal silicate cathodes and chevrel phase Mo6S8 in the analogous rechargeable Mg-ion battery system[J]. J. Power Sources, 2016, 321: 76
doi: 10.1016/j.jpowsour.2016.04.094
[28] Mao M L, Lin Z J, Tong Y X, et al. Iodine vapor transport-triggered preferential growth of chevrel Mo6S8 nanosheets for advanced multivalent batteries[J]. ACS Nano, 2020, 14: 1102
doi: 10.1021/acsnano.9b08848
[29] Li W Z, Huang C D. Transition metal oxides and transition metal sulfides as cathodes for magnesium-ion batteries: Current status and modification strategies[J]. Mater. Today Energy, 2024, 40: 101510
[30] Sun Q, Luo S H, Huang R, et al. Recent progress of magnesium electrolytes for rechargeable magnesium batteries[J]. Coord. Chem. Rev., 2024, 515: 215956
doi: 10.1016/j.ccr.2024.215956
[1] 刘洋, 孙健, 陆善平. Mo含量对1000 MPa级高强钢焊缝金属组织和力学性能的影响[J]. 金属学报, 2026, 62(9): 1553-1565.
[2] 刘蓉, 高古辉, 桂晓露, 白秉哲. 贝氏体钢轨的低温疲劳裂纹扩展行为[J]. 金属学报, 2026, 62(9): 1541-1552.
[3] 苏逸云, 郝晓虎, 黎书华, 崔泽琴, 闫德俊, 李卫国. 瞬态热处理对船用钛/钢接头界面组织和结合性能的影响[J]. 金属学报, 2026, 62(9): 1528-1540.
[4] 刘泽田, 路伟昭, 徐新宇, 刘旭, 张少游, 王慧远. 均质化温度对3003铝合金微观组织和力学性能的影响规律[J]. 金属学报, 2026, 62(9): 1503-1516.
[5] 尹建年, 马英杰, 杨锐, 雷家峰, 齐敏, 周丽. Ti551合金的热变形行为及热加工图构建[J]. 金属学报, 2026, 62(8): 1427-1442.
[6] 杨坤, 郭庆伟, 李超, 张高龙, 赵宇宏, 侯华. 冲击加载下60钢的动态力学响应及层裂行为[J]. 金属学报, 2026, 62(8): 1405-1416.
[7] 杨何, 侯自勇, 胡兴益, 程金骏, 王亚茹, 范国华, 黄晓旭. 超高强不锈钢微丝表征技术:进展与展望[J]. 金属学报, 2026, 62(7): 1189-1206.
[8] 王彬, 赵鹏, 刘家伟, 张春波, 秦志伟, 董红刚, 李鹏. 热处理对FGH96高温合金惯性摩擦焊接头微观组织演变及力学性能的影响[J]. 金属学报, 2026, 62(6): 1043-1058.
[9] 王玮, 张宇博, 赵燕, 王同敏, 李廷举. 高熵合金颗粒对选区激光熔化Al12Si合金固溶组织和力学性能的影响[J]. 金属学报, 2026, 62(6): 1009-1020.
[10] 郭恩宇, 杜泽龙, 李炳志, 王同敏. 基于同步辐射原位表征技术的镁合金研究进展[J]. 金属学报, 2026, 62(5): 890-904.
[11] 杜东海, 林腾鸿, 王辉. 耐事故燃料包壳用FeCrAl合金的腐蚀与辐照性能研究进展[J]. 金属学报, 2026, 62(10): 1655-1675.
[12] 陆善平, 孙健. 高强钢焊缝金属组织设计与强韧化机理研究进展[J]. 金属学报, 2026, 62(1): 1-16.
[13] 阴嘉琳, 石磊, 武传松. 超声振动对镁/铝异质合金搅拌摩擦搭接焊接头界面组织演变的影响[J]. 金属学报, 2026, 62(1): 133-147.
[14] 李红, 姜玉清, 曹玉鹏, 王加友, 刘澍彬. 冷丝辅助旋转/摇动电弧窄间隙MAG焊缝成形特性及接头组织性能演变机制[J]. 金属学报, 2026, 62(1): 235-252.
[15] 王洪瑛, 姚志浩, 李大禹, 郭婧, 姚凯俊, 董建新. 高 γ' 相含量粉末及变形高温合金组织和力学性能的异同性[J]. 金属学报, 2025, 61(9): 1364-1374.