Please wait a minute...
金属学报  1994, Vol. 30 Issue (11): 502-506    
  论文 本期目录 | 过刊浏览 |
Cu及Cu-Zn合金预变形和循环软化的滑移线形貌
柴惠芬;阮征;范群成
西安交通大学
SLIP BANDS OF PRESTRAINED AND CYCLED Cu AND Cu-Zn ALLOY
CHAI Huifen;RUAN Zheng;FAN Quncheng (Xi'an Jiaotong University)(Manuscript received 7 December; 1993; in revised form 10 June; 1994)
引用本文:

柴惠芬;阮征;范群成. Cu及Cu-Zn合金预变形和循环软化的滑移线形貌[J]. 金属学报, 1994, 30(11): 502-506.
, , . SLIP BANDS OF PRESTRAINED AND CYCLED Cu AND Cu-Zn ALLOY[J]. Acta Metall Sin, 1994, 30(11): 502-506.

全文: PDF(418 KB)  
摘要: 观察了两种不同滑移方式的材料──纯Cu及Cu-Zn合金经预变形及循环软化后的表面滑移线形貌.发现二者预变形的双交滑移特征不同,且Cu-Zn合金的交滑移与应力—应变曲线上的动态应变时效现象相对应.Cu-Zn合金循环软化后有两种衬度的滑移带,而纯Cu则主要表现为驻留滑移带,说明两种材料疲劳应变的容纳方式不同.根据滑移带形貌解释了它们不同的软化行为.
关键词 滑移带滑移方式动态应变时效循环软化    
Abstract:The mopohology of slip bands for materials with two different slip modes: pure Cu and Cu-Zn alloy after prestraining and cyclic softening has been observed. Both of their double cross slip bands are rather different, and ones in Cu-Zn alloy is corresponding to the dynamic strain aging. Two kinds of slip bands contrast are shown in the cyclic softened Cu-Zn alloy, but mainly the stationary slip bands appeare in pure Cu. These may indicate that the way to accommodate the cyclic strain is different. According to the feature of slip bands,the mechanical behaviour of softening for the two materials has been explained. Correspondent: CHAI Huifen,(professor, Xi'an Jiaotong University, Xi'an 710049)
Key wordsslip band    slip mode    dynamic strain aging    cyclic softening
收稿日期: 1994-11-18     
1HallEO.YieldPointPhenomenainMetalsandAlloys.NewYork:PlenumPress,1970:2012HongSI,LairdC.ActaMetall,1990;38:20853MughrabiH.Proc 5thIntConfontheStrengthofMetalsandAlloys,OxfordPergamon,1980:16154LairdC.In:Nabarro F R N ed.,DislocationsinSolids,Vol.6,North—HollandAmsterdam,1983:.575柴惠芬,阮征,范群成,金属学报,1993;29:A153
[1] 韩冬, 张炎杰, 李小武. 短程有序对高层错能Cu-Mn合金拉-拉疲劳变形行为及损伤机制的影响[J]. 金属学报, 2022, 58(9): 1208-1220.
[2] 李冬冬, 钱立和, 刘帅, 孟江英, 张福成. Mn含量对Fe-Mn-C孪生诱发塑性钢拉伸变形行为的影响[J]. 金属学报, 2018, 54(12): 1777-1784.
[3] 郭鹏程, 钱立和, 孟江英, 张福成. 高锰奥氏体TWIP钢的单向拉伸与拉压循环变形行为*[J]. 金属学报, 2014, 50(4): 415-422.
[4] 蔡玉龙, 符师桦, 王玉辉, 田成刚, 高越, 程腾, 张青川. 基于三维数字图像相关法的5456铝镁合金锯齿形屈服研究[J]. 金属学报, 2014, 50(12): 1491-1497.
[5] 李小阳,李鹏,周亦胄,金涛,张哲峰. 取向差对SRR99双晶高温合金拉伸性能的影响[J]. 金属学报, 2013, 49(3): 351-357.
[6] 韩国明,崔传勇,谷月峰,胡壮麒,孙晓峰. 一种镍基高温合金PLC效应的温度依赖性研究[J]. 金属学报, 2013, 49(10): 1243-1247.
[7] 符师桦 程腾 张青川 曹鹏涛 胡琦. 5456铝合金PLC效应的两种临界机制研究[J]. 金属学报, 2012, 48(12): 1453-1458.
[8] 田成刚 崔传勇 谷月峰 孙晓峰. 固溶处理对Ni-Co基高温合金反常动态应变时效的影响[J]. 金属学报, 2012, 48(10): 1223-1228.
[9] 唐恋 卢磊. 孪晶片层厚度对纳米孪晶Cu疲劳性能的影响[J]. 金属学报, 2009, 45(7): 808-814.
[10] 江慧丰 陈学东 范志超 董杰 姜恒 陆守香. 动态应变时效对316L不锈钢疲劳蠕变行为的影响[J]. 金属学报, 2009, 45(3): 326-330.
[11] 谭军 李聪 孙超 应诗浩 连姗姗 阚细武 冯可芹. Zr--4合金应力松弛过程中的热激活变形与动态应变时效[J]. 金属学报, 2009, 45(2): 173-177.
[12] 王聪; 徐永波; 韩恩厚 . LA41镁合金的PLC效应及其解释[J]. 金属学报, 2006, 42(2): 191-194 .
[13] 江慧丰; 张青川; 徐毅豪; 伍小平 . 时效对Al-Cu合金中锯齿形流动的影响[J]. 金属学报, 2006, 42(2): 139-142 .
[14] 孙亮; 张青川; 江慧丰 . 溶质浓度对Al-Cu合金中PLC效应的影响[J]. 金属学报, 2006, 42(12): 1248-1252 .
[15] 江慧丰; 张青川; 蒋震宇; 伍小平 . Al-Cu合金中PLC效应时域和空域行为的实验研究[J]. 金属学报, 2005, 41(7): 727-732 .