Please wait a minute...
金属学报    DOI: 10.11900/0412.1961.2025.00392
  本期目录 | 过刊浏览 |
Cr、Mo掺杂和单轴预应变对bcc Fe (110)表面氢吸附和扩散的影响
蔡一全, 尹益辉, 李继承

  1. 1 中国工程物理研究院 总体工程研究所  绵阳 621900
  2. 2 西南科技大学 工程材料与结构冲击振动四川省重点实验室  绵阳 621999

Effects of Cr and Mo Doping and Uniaxial Pre-Strain on Hydrogen Adsorption and Diffusion on bcc Fe (110) Surfaces
Cai Yiquan

1 Institute of Systems Engineering, China Academy of Engineering Physics, Mianyang 621900, China

2 Key Laboratory of Engineering Materials and Structural Shock Vibration in Sichuan Province, Southwest University of Science and Technology, Mianyang 621999, China
引用本文:

蔡一全, 尹益辉, 李继承. Cr、Mo掺杂和单轴预应变对bcc Fe (110)表面氢吸附和扩散的影响[J]. 金属学报, DOI: 10.11900/0412.1961.2025.00392.
Yiquan Cai, , . Effects of Cr and Mo Doping and Uniaxial Pre-Strain on Hydrogen Adsorption and Diffusion on bcc Fe (110) Surfaces[J]. Acta Metall Sin, 0, (): 0-.

全文: PDF(3187 KB)  
摘要: 为了从原子尺度上揭示载荷条件下H原子与Cr、Mo原子在Fe(110)表面的相互作用机制,继而为载荷作用下铁基材料的抗氢脆设计提供理论支撑,本工作采用第一性原理方法,从表面位点的空间构型、氢吸附时的结合能(Eb)、电子结构、扩散能垒(∆E)四个方面探究了单轴预应变(ε)对Cr、Mo单原子及双原子联合掺杂的bcc Fe (110)表面氢吸附与扩散的影响。结果表明,相对于纯Fe表面,Cr/Mo单原子掺杂提高了Eb,然而H原子仍能在远离掺杂原子的∆E较低的位点向内部扩散,因此单原子掺杂对提高抗氢脆能力的贡献有限;Cr-Mo双原子掺杂时,相比于其他位点,H在掺杂位点的Eb较小并且∆E较大,特别是在短桥(SB)构型的掺杂位点,H原子会被牢牢束缚,显著提高材料的抗氢脆能力。压缩预应变增大了表面位点的氢吸附能力,同时使H向材料内部扩散的能力变弱,而拉伸预应变的作用刚好相反,对于Cr-Mo共掺杂(SB构型)表面,在拉伸预应变不超过临界值的情况下,氢扩散能垒基本不变,而拉伸预应变超过2.5%时氢扩散能垒会急剧减小,严重影响材料的抗氢脆性能。
关键词 : 第一性原理,  掺杂,  预应变,  氢脆    
Abstract:In industrial applications, components are often exposed to the combined effects of hydrogen and mechanical stress. Despite extensive research, the fundamental mechanism of stress (strain)-induced hydrogen embrittlement remains controversial and lacks a universal consensus. The experimental evidence shows that alloying steel with Cr or Mo individually enhances its resistance to hydrogen embrittlement; however, the material still exhibits a significant susceptibility to hydrogen embrittlement. Notably, co-alloying Cr and Mo into steel, even in small amounts, significantly boosts the steel’s resistance to hydrogen embrittlement. Current research at the atomic scale primarily investigates two areas: (1) the influence of various alloying elements on hydrogen adsorption and diffusion behavior and (2) the effects of pre-strain on hydrogen adsorption and diffusion in pure metals or homogeneous materials. However, a significant gap remains in terms of first-principles calculations that examine the combined effects of Cr-Mo co-doping and pre-strain on hydrogen adsorption and diffusion at doped surfaces. To reveal the atomic-scale interaction mechanisms between hydrogen atoms and Cr and Mo atoms on the Fe (110) surface under mechanical loading, thus providing theoretical support for designing Fe-based materials with enhanced hydrogen embrittlement resistance under load conditions, this study employs first-principles calculations to systematically analyze the effects of uniaxial pre-strain (ε) on hydrogen adsorption and diffusion at both single-atom and dual-atom co-doped bcc Fe (110) surfaces. This investigation focuses on four critical aspects: spatial configuration of surface sites, hydrogen adsorption binding energy (Eb), electronic structure, and diffusion energy barrier (∆E). Key findings indicate that compared to the pure Fe surface, single-atom doping with Cr or Mo increases Eb. However, hydrogen can still diffuse into subsurface sites distant from the dopant atom, where ∆E is lower, leading to hydrogen embrittlement. In contrast, co-doping with Cr and Mo results in a lower Eb and a higher ∆E at the doped site compared to other surface sites, significantly enhancing the resistance to hydrogen embrittlement. Notably, hydrogen atoms are strongly trapped at the doped site in the short-bridge (SB) configuration, which significantly enhances the material’s resistance to hydrogen embrittlement. The compressive pre-strain enhances hydrogen adsorption on the surface while suppressing its inward diffusion, whereas tensile pre-strain has the opposite effect. For the Cr-Mo co-doped (SB configuration) surface, ∆E remains nearly constant under tensile strain up to 2.5%. However, beyond this point, ∆E drops sharply, severely compromising hydrogen embrittlement resistance.
Key words: First-principles    Doping    Pre-strain    Hydrogen embrittlement
收稿日期: 2025-12-01     
基金资助:国家自然科学基金(12072333)
[1] 刘丹, 白静, 章羽, 郭珂良, 刘新, 左良. Co、Si共掺杂调控Ni-Mn-Ti合金马氏体相变、磁性能和力学性能的第一性原理研究[J]. 金属学报, 2026, 62(7): 1310-1322.
[2] 杨二阔, 张泽宇, 王亚松, 彭威, 历长云, 李广书, 康慧君, 王同敏. Al掺杂对CuInTe2热电性能的影响[J]. 金属学报, 2026, 62(6): 1137-1146.
[3] 杜德灏, 管明, 曹祚恒, 王铭, 何斌斌, 黄明欣. 热成形汽车钢的弯曲韧性与氢脆行为研究进展[J]. 金属学报, 2026, 62(5): 959-974.
[4] 宝尔根, 王建韬, 徐文静, 马会, 陈星秋. 合金元素对 α-Fe中H原子溶解及扩散影响的第一性原理研究[J]. 金属学报, 2026, 62(3): 489-496.
[5] 梁弼宁, 曹烁, 王慈, 刘建荣, 杨锐, 胡青苗. 高温钛合金中合金原子在 α2 相中占位选择的第一性原理研究[J]. 金属学报, 2026, 62(10): 1762-1772.
[6] 袁航, 张燕云, 王聪. 第一性原理分子动力学研究MnO对埋弧焊剂导电机制的影响[J]. 金属学报, 2026, 62(1): 191-202.
[7] 杨波, 陈小亮, 史晓斌, 任伟, 高恒, 宋广生. 稀土Y掺杂V-Cr合金增塑机理及透氢性能[J]. 金属学报, 2025, 61(6): 887-899.
[8] 孟祥龙, 刘瑞良, Li D. Y.. 钽合金表面渗碳层中碳化物析出及其性能的第一性原理研究[J]. 金属学报, 2025, 61(5): 797-808.
[9] 梁炫, 侯廷平, 张东, 谭昕暘, 吴开明. 中碳Nb合金化钢液析碳化物的析出行为[J]. 金属学报, 2025, 61(4): 653-664.
[10] 张建东, 席晓翀, 凌永生, 曾繁荣, 单卿, 贾文宝. (AlCrTaTiZr)N x 阻氚涂层制备及其表面氢同位素吸附[J]. 金属学报, 2025, 61(12): 1781-1789.
[11] 罗列文, 王明洋, 高志明, 夏大海, 邓意达, 胡文彬. 高强铝合金晶界氢陷阱的原子尺度作用机制[J]. 金属学报, 2025, 61(11): 1747-1757.
[12] 王京京, 姚志浩, 张鹏, 赵杰, 张迈, 王蕾, 董建新, 陈迎. 镍基高温合金中S元素对基体与热障涂层界面稳定性的影响[J]. 金属学报, 2024, 60(9): 1250-1264.
[13] 武逸, 司阳, 黄彦民, 刁江勇, 孟繁敬, 刘增, 刘洪阳. C包覆Ni磁性载体负载Pt催化硝基苯加氢性能[J]. 金属学报, 2024, 60(8): 1141-1149.
[14] 周彦余, 李江旭, 刘晨, 赖俊文, 高强, 马会, 孙岩, 陈星秋. 金属间化合物Pt7Sb投影Berry相位与析氢催化关联的第一性原理计算[J]. 金属学报, 2024, 60(6): 837-847.
[15] 程坤, 陈树明, 曹烁, 刘建荣, 马英杰, 范群波, 程兴旺, 杨锐, 胡青苗. 第一性原理研究钛合金中的沉淀强化[J]. 金属学报, 2024, 60(4): 537-547.