Please wait a minute...
Acta Metall Sin  2013, Vol. 49 Issue (10): 1191-1200    DOI: 10.3724/SP.J.1037.2013.00230
Current Issue | Archive | Adv Search |
EFFECT OF W FIBER DIAMETER ON THE COMPRESSIVE MECHANICAL PROPERTIES OF THE Zr-BASED METALLIC GLASS COMPOSITES
ZHANG Bo1,2), FU Huameng2), ZHU Zhengwang2), ZHANG Haifeng2),DONG Chuang1),HU Zhuangqi2)
1) College of Materials Science and Engineering, Dalian University of Technology, Dalian 116024
2) Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016
Cite this article: 

ZHANG Bo, FU Huameng, ZHU Zhengwang, ZHANG Haifeng,DONG Chuang,HU Zhuangqi. EFFECT OF W FIBER DIAMETER ON THE COMPRESSIVE MECHANICAL PROPERTIES OF THE Zr-BASED METALLIC GLASS COMPOSITES. Acta Metall Sin, 2013, 49(10): 1191-1200.

Download:  PDF(3565KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

The Zr-based metallic glass composite containing four kinds of W fibers with different diameters are prepared by infiltration casting method. The diameters of the W fibers are 1000, 700, 500 and 200μm,respectively. The effect of fiber diameter on the quasi-static and dynamic compressive mechanical properties and deformation behaviors of the composites was investigated. The results show that the quasi-static compressive properties improve with the decrease of the W fiber diameters, which is attributed to the increasing interface area and the size effect of the metallic glass matrix. Under dynamic compressive loading, the strain rate changes with the variation of the W fiber diameter at the same bullet firing pressure. The dynamic compressive strength and strain rate sensitivity exponent of the metallic glass composite with a fiber diameter of 500μm is the highest among the four W fiber/Zr-based metallic glass composites.

Key words:  W fiber      metallic glass composite      shear band      strain rate      interface     
Received:  29 April 2013     

URL: 

https://www.ams.org.cn/EN/10.3724/SP.J.1037.2013.00230     OR     https://www.ams.org.cn/EN/Y2013/V49/I10/1191

[1] Johnson W.  MRS Bull, 1999; 24: 42

[2] Spaepen F.  Acta Metall, 1977; 25: 407
[3] Choi-Yim H, Conner R D, Szuecs F, Johnson W L.  Acta Mater, 2002; 50: 2737
[4] He M Y, Evans A G, Curtin W A.  Acta Metall Mater, 1993; 41: 871
[5] Conner R D, Dandliker R B, Johnson W L.  Acta Mater, 1998; 46: 6089
[6] Haein C Y, Lee S Y, Conner R D.  Scr  Mater, 2008; 58: 763
[7] Qiu K Q, Wang A M, Zhang H F, Ding B Z, Hu Z Q.  Intermetallics, 2002; 10: 1283
[8] Zhang H, Zhang Z F, Wang Z G, Zhang H F, Zang Q S, Qiu K Q.  Metall Mater Trans, 2006; 37A:2459
[9] Conner R D, Dandliker R B, Scruggs V, Johnson W L.  Int J Impact Eng, 2000; 24: 435
[10] Choi-Yim H, Conner R D, Szuecs F, Johnson W L.  Scr Mater, 2001; 45: 1039
[11] Xue Y F, Cai H N, Wang L, Wang F C, Zhang H F.  Mater Sci Eng, 2007; A445: 275
[12] Zong H T, Ma M Z, Liu L, Zhang X Y, Bai B W, Yu P F, Qi L, Jing Q, Li
G, Liu R P.   J Alloys Compd, 2010; 504: S106
[13] Subhash G, Dowding R J, Kecskes L J.  Mater Sci Eng, 2002; A334: 33
[14] Jiao T, Kecskes L J, Hufnagel T C, Ramesh K T.  Metall Mater Trans, 2004; 35A: 3439
[15] Deng S T, Diao H, Chen Y L, Yan C, Zhang H F, Wang A M, Hu Z Q.  Scr Mater, 2011;64: 85
[16] Lee C J, Huang J C, Nieh T G.  Appl Phys Lett, 2007; 91: 161913
[17] Schuster B E, Wei Q, Hufnagel T C, Ramesh K T.  Acta Mater, 2008; 56: 5091
[18] Xie S, George E P.  Intermetallics, 2008; 16: 485
[19] Wu F F, Zhang Z F, Mao S X.  Acta Mater, 2009; 57: 257
[20] Zhang Z, Zhang H, Pan X, Das J, Eckert J.  Philos Mag Lett, 2005; 85: 513
[21] Conner R D, Li Y, Nix W D, Johnson W L.  Acta Mater, 2004; 52: 2429
[22] Zhang H, Zhang Z, Wang Z, Zhang H.  Mater Sci Eng, 2008; A483: 164
[23] Pampillo C A.  J Mater Sci, 1975; 10: 1194
[24] Hufnagel T C, Jiao T, Li Y, Xing L Q, Ramesh K T.  J Mater Res, 2002; 17: 1441
[25] Xue Y F, Cai H N, Wang L, Wang F C, Zhang H F.  Mater Sci Eng, 2008; A473: 105
[26] Mukai T, Nieh T G, Kawamura Y, Inoue A, Higashi K.  Intermetallics, 2002; 10: 1071
[27] Bruck H A, Rosakis A J, Johnson W L.  J Mater Res, 1996; 11: 503
[28] Lu J, Ravichandran G, Johnson W L.  Acta Mater, 2003; 51: 3429

[29] Xue Y F, Wang L, Cai H N, Wang F C, Cheng H W, Zhang H F, Wang A M.Metall Mater Trans, 2011; 42A: 3521

[1] WANG Furong, ZHANG Yongmei, BAI Guoning, GUO Qingwei, ZHAO Yuhong. First Principles Calculation of Al-Doped Mg/Mg2Sn Alloy Interface[J]. 金属学报, 2023, 59(6): 812-820.
[2] LI Qian, SUN Xuan, LUO Qun, LIU Bin, WU Chengzhang, PAN Fusheng. Regulation of Hydrogen Storage Phase and Its Interface in Magnesium-Based Materials for Hydrogen Storage Performance[J]. 金属学报, 2023, 59(3): 349-370.
[3] WANG Kai, JIN Xi, JIAO Zhiming, QIAO Junwei. Mechanical Behaviors and Deformation Constitutive Equations of CrFeNi Medium-Entropy Alloys Under Tensile Conditions from 77 K to 1073 K[J]. 金属学报, 2023, 59(2): 277-288.
[4] CHANG Litao. Corrosion and Stress Corrosion Crack Initiation in the Machined Surfaces of Austenitic Stainless Steels in Pressurized Water Reactor Primary Water: Research Progress and Perspective[J]. 金属学报, 2023, 59(2): 191-204.
[5] XIA Dahai, JI Yuanyuan, MAO Yingchang, DENG Chengman, ZHU Yu, HU Wenbin. Localized Corrosion Mechanism of 2024 Aluminum Alloy in a Simulated Dynamic Seawater/Air Interface[J]. 金属学报, 2023, 59(2): 297-308.
[6] ZHOU Xiaobin, ZHAO Zhanshan, WANG Wanxing, XU Jianguo, YUE Qiang. Physical and Mathematical Simulation on the Bubble Entrainment Behavior at Slag-Metal Interface[J]. 金属学报, 2023, 59(11): 1523-1532.
[7] WANG Nan, CHEN Yongnan, ZHAO Qinyang, WU Gang, ZHANG Zhen, LUO Jinheng. Effect of Strain Rate on the Strain Partitioning Behavior of Ferrite/Bainite in X80 Pipeline Steel[J]. 金属学报, 2023, 59(10): 1299-1310.
[8] ZHENG Shijian, YAN Zhe, KONG Xiangfei, ZHANG Ruifeng. Interface Modifications on Strength and Plasticity of Nanolayered Metallic Composites[J]. 金属学报, 2022, 58(6): 709-725.
[9] CHEN Yang, MAO Pingli, LIU Zheng, WANG Zhi, CAO Gengsheng. Detwinning Behaviors and Dynamic Mechanical Properties of Precompressed AZ31 Magnesium Alloy Subjected to High Strain Rates Impact[J]. 金属学报, 2022, 58(5): 660-672.
[10] DING Zongye, HU Qiaodan, LU Wenquan, LI Jianguo. In Situ Study on the Nucleation, Growth Evolution, and Motion Behavior of Hydrogen Bubbles at the Liquid/ Solid Bimetal Interface by Using Synchrotron Radiation X-Ray Imaging Technology[J]. 金属学报, 2022, 58(4): 567-580.
[11] LU Lei, ZHAO Huaizhi. Progress in Strengthening and Toughening Mechanisms of Heterogeneous Nanostructured Metals[J]. 金属学报, 2022, 58(11): 1360-1370.
[12] CHEN Wei, ZHANG Huan, MU Juan, ZHU Zhengwang, ZHANG Haifeng, WANG Yandong. Effects of Microstructure and Strain Rate on Dynamic Mechanical Properties and Adiabatic Shear Band of TC4 Alloy[J]. 金属学报, 2022, 58(10): 1271-1280.
[13] HU Biao, ZHANG Huaqing, ZHANG Jin, YANG Mingjun, DU Yong, ZHAO Dongdong. Progress in Interfacial Thermodynamics and Grain Boundary Complexion Diagram[J]. 金属学报, 2021, 57(9): 1199-1214.
[14] ZHAO Yuhong, JING Jianhui, CHEN Liwen, XU Fanghong, HOU Hua. Current Research Status of Interface of Ceramic-Metal Laminated Composite Material for Armor Protection[J]. 金属学报, 2021, 57(9): 1107-1125.
[15] QU Ruitao, WANG Xiaodi, WU Shaojie, ZHANG Zhefeng. Research Progress in Shear Banding Deformation and Fracture Mechanisms of Metallic Glasses[J]. 金属学报, 2021, 57(4): 453-472.
No Suggested Reading articles found!