DAMPING CAPACITY OF Fe-Cr-Al-Si ALLOYS

Acta Metall Sin

1998, Vol. 34

Issue (10): 1039-1042 DOI:

Current Issue | Archive | Adv Search

DAMPING CAPACITY OF Fe-Cr-Al-Si ALLOYS

WANG Weiguo; ZHOU Bangxin; ZHENG Zhongmin(Laboratory for Nuclear Fuel and Materials; Nuclear Power Institute of China; Chengdu 610041)Correspondent: WANG Weiguo; Tel: (028)5582199-88531

Cite this article:

WANG Weiguo; ZHOU Bangxin; ZHENG Zhongmin(Laboratory for Nuclear Fuel and Materials; Nuclear Power Institute of China; Chengdu 610041)Correspondent: WANG Weiguo; Tel: (028)5582199-88531. DAMPING CAPACITY OF Fe-Cr-Al-Si ALLOYS. Acta Metall Sin, 1998, 34(10): 1039-1042.

Download:

PDF(382KB)
Export: BibTeX | EndNote (RIS)

Abstract The effect of silicon on the damping capacity of Fe-Cr-Al alloy has beeninvestigated with the inverted torsion pendulum teclmiques. The results indicate that, smallamount silicon (app. 1% mass fraction) addition to Fe-Cr-Al or substitution of silicon foraluminum in Fe-Cr-Al alloy can make the damping capacity of the alloys higher than that ofFe-Cr-Al alloy when annealed below 1273 K; substituting silicon for small amount aluminum inFe-Cr-Al, the damping capacity of the alloy is much higher than that of Fe-Cr-Al alloy whenannealed above 1373 K followed by air cooling. The curves of logajrithmic decrement versus strainamplitude reveal the damping of the alloys resulting mainly from magonetomechanical hystereses.

Key words: Fe-Cr-Al-Si alloy damping capacity internal friction logarithmic decrement

Received: 18 October 1998

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y1998/V34/I10/1039

1Masumoto H, Hinai M, Sawsya S. Trans Jpn Inst Met, 1984; 25: 891
2Karimi A, Giaugue P H, Martin J L. Mater Sci Forum, 1995; 179-181: 679
3Hinai M, Sawaya S, Masumoto H. Trans Jpn Inst Met, 1994; 35: 74
4Yamada T, Takamura T, Hashisume S, Odakei T, Omori T, Hation K. NKK Technical Review, No.65, 1992: 21
5佐藤昭治,砂田晃,渡边敏.热处理, 1992; 32: 340 (Sotoh S, Sunada A, Watanabe S, Heat Treat, 1992; 32: 340)
6Cochart A W.J Appl Mech,1961; 15: 196
7Smith G W, Birchak J R. J Appl Phgs, 1968; 39: 2311
8Astie B, Dugaugue J.J Phys(Paris), 1981; 42: 627
9Lee K H, Vdovenko V A, Cho K K.J Korean Inst Met Mater 1994; 32: 1499
10冯端,王业宁,丘第荣.金属物理.第一版,北京:科学出版社,1964 (Feng D,Wang Y N,Qiu D R.Metal Physics.Beijing:Science Press,1964)

[1]	WANG Yu, HU Bin, LIU Xingyi, ZHANG Hao, ZHANG Haoyun, GUAN Zhiqiang, LUO Haiwen. Influence of Annealing Temperature on Both Mechanical and Damping Properties of Nb-Alloyed High Mn Steel[J]. 金属学报, 2021, 57(12): 1588-1594.
[2]	WANG Shihong, LI Jian, CHAI Feng, LUO Xiaobing, YANG Caifu, SU Hang. Influence of Solution Temperature on γ→ε Transformation and Damping Capacity of Fe-19Mn Alloy[J]. 金属学报, 2020, 56(9): 1217-1226.
[3]	Yantao YAO, Liqing CHEN, Wenguang WANG. Damping Capacities of (B₄C+Ti) Hybrid Reinforced Mg and AZ91D Composites Processed by In Situ Reactive Infiltration Technique[J]. 金属学报, 2019, 55(1): 141-148.
[4]	Xiaofeng HU,Yubin DU,Desheng YAN,Lijian RONG. Cu Precipitation and Its Effect on Damping Capacity and Mechanical Properties of FeCrMoCu Alloy[J]. 金属学报, 2017, 53(5): 601-608.
[5]	LI Weijuan, ZHANG Hengyi, FU Hao, ZHANG Jianping, QI Xiangyu. INTERNAL FRICTION STUDY OF MECHANISM OF BAKE-HARDENING ON LOW CARBON STEEL[J]. 金属学报, 2015, 51(4): 385-392.
[6]	WANG Hua SHI Wen HE Yanlin FU Renyu LI Lin. STUDY OF Mn AND P SOLUTE DISTRIBUTIONS AND THEIR EFFECT ON THE TENSILE BEHAVIOR IN ULTRA LOW CARBON BAKE HARDENING STEELS[J]. 金属学报, 2011, 47(3): 263-268.
[7]	LIU Gang SUN Yali HU Jin ZHOU Ke. DAMPING CAPACITY OF Bi₂O₃–COATED Al₁₈B₄O₃₃WHISKER REINFORCED Al MATRIX COMPOSITES[J]. 金属学报, 2010, 46(8): 979-983.
[8]	HU Xiaofeng LI Xiuyan ZHANG Bo RONG Lijian LI Yiyi. INFLUENCES OF ADDITIONS OF Nb, Ti AND Cu ON DAMPING CAPACITY AND CORROSION RESISTANCE OF Fe--13Cr--2.5Mo ALLOY[J]. 金属学报, 2009, 45(6): 717-722.
[9]	WU Jie CUI Hongzhi CHI Jing YAO Shuyu HAN Fusheng. INTERNAL FRICTION PEAK IN B2 Fe--Al ALLOYS DURING ORDERING PROCESS[J]. 金属学报, 2009, 45(4): 396-399.
[10]	XIAO Fu ZHAO Xinqing XU Huibin JIANG Haichang RONG Lijian. DAMPING CAPACITY AND MECHANICAL PROPERTY OF NiTiNb SHAPE MEMORY ALLOYS[J]. 金属学报, 2009, 45(1): 18-24.
[11]	Jian ZHANG. EFFECTS OF GRAIN-BOUNDARY PHASES ON HYDROGEN EMBRITTLEMENT OF FE-NI-CR AUSTENITIC ALLOY BY INTERNAL FRICTION[J]. 金属学报, 2008, 44(9): 1095-1098 .
[12]	SUN Wei. The internal friction peak correlated to the relaxation of Al antisite atoms in Fe-Al alloys[J]. 金属学报, 2007, 43(3): 311-314 .
[13]	LIN Renrong; LIU Fang; CAO Mingzhou; YANG Rui. INFLUENCE OF ANNEALING AND SUBSTITUTION ELEMENTS ON DAMPING CAPACITY AND STRENGTH OF Fe-Cr-Al BASED ALLOYS[J]. 金属学报, 2005, 41(9): 958-962 .
[14]	WANG Hongbin; WANG Xiaoyu; ZHANG Jihua; XU Zuyao T. Y. Hsu. Internal Friction of Nano--Grained Fe--25\%Ni Alloy Bulk[J]. 金属学报, 2004, 40(5): 523-526 .
[15]	CHE Yunyi; LIU Fendi; ZENG Guiyi; XU Yuchang; JI Jingwen (College of Sciences; Northeastern Univerisity; Shenyang 110006)HUA Qiaozhu; LIU Jianmin; HUANG Zhenru(Institute of Iron & Steel; Baoshan Iron & Steel Company; Shanghai 201900)Correspondent: JI Jingwen; professor; Tel: (024)25915148; Fax: (024)23891072;E-mail: cos ramm. cneu. edu. cn.. Snoek-K■-kster DAMPING IN 340 MPa BAKE HARDENING STEELS[J]. 金属学报, 1998, 34(8): 831-835.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed