|
|
TRANSITIONAL LAYER OF PHASE INTERFACES IN Ti(C,N)-BASED CERMET |
XIONG Weihao;HU Zhenhua;CUI Kun(State Key;Laboratory;of Dies Technology;Huazhong University of Science and Technology;Wuhan 430074)(State Key Laboratory of Dies Technology;Huazhong University of Science and Technology;Wuhan 430074)(Manuscript received 1996-04-26) |
|
Cite this article:
XIONG Weihao;HU Zhenhua;CUI Kun(State Key;Laboratory;of Dies Technology;Huazhong University of Science and Technology;Wuhan 430074)(State Key Laboratory of Dies Technology;Huazhong University of Science and Technology;Wuhan 430074)(Manuscript received 1996-04-26). TRANSITIONAL LAYER OF PHASE INTERFACES IN Ti(C,N)-BASED CERMET. Acta Metall Sin, 1996, 32(10): 1075-1080.
|
Abstract The phase interfacial transition layer in Ti(C,N)-based cermet has been proved systematically by using TEM and EDAX.Experimental results show that there exist obviously a surrounding structure at the edge of carbonitride phase in Ti(C,N)-based cermet,it is a transitional phase.Ti(C,N)/Ni phase interface has no constant orientation relationship.W and Mo are basically concentrated in interface and there is a composition gradient of Ti,Ni,W and Mo in phase interface.HREM observation of interface reveals that in phase interface of Ti(C,N)-based cermet,the transitional layer has width of 8-10 nm and nanocrystalline structure.
|
Received: 18 October 1996
|
1熊惟皓.华中理工大学博士学位论文,19942LaouiT,ZouH,VanderBiestO.RefractMetHardMater.1992;11(1):2073陈世朴,王永瑞.金属电子显微分析.北京:机械工业出版社,1982:1144熊惟皓,胡镇华,崔 .材料导报,1992;5:245张国军.机械工程材料,1990;14(3):4 |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|