Acta Metall Sin  1988, Vol. 24 Issue (2): 147-154    DOI:

Current Issue | Archive | Adv Search |

FLUID DYNAMICS OF CONTINUOUS CASTING TUNDISHES

HE Youduo Professor;Department of Mepallergy;Baotou Institute of Iron and Speel Technology;Baotou;Nei Monggot;SAHAI Yogeshwar Baotou Institute of Iron and Steel Technology; Baotou; Nei Monggol; The Ohio State University; Columbus OH; USA

HE Youduo Professor;Department of Mepallergy;Baotou Institute of Iron and Speel Technology;Baotou;Nei Monggot;SAHAI Yogeshwar Baotou Institute of Iron and Steel Technology; Baotou; Nei Monggol; The Ohio State University; Columbus OH; USA. FLUID DYNAMICS OF CONTINUOUS CASTING TUNDISHES. Acta Metall Sin, 1988, 24(2): 147-154.

Abstract References Related Articles Recommended Metrics Download:  PDF(689KB)  Export:  BibTeX | EndNote (RIS)       Abstract  A mathematical model torepresent turbulent fluid flow and mixing incontinuous casting tundishes has been developed. The model involves solution ofthe three-dimensional turbulent Navier-Stokes equation, turbulence being modeledby the so-called K-ε, two-equation model. Fluid flow parameters and residence timedistribution has been predicted in a tundish of rectangular cross section. The modelis later extended to predict fluid flow in typical industrial tundishes where wallsare not vertical, but slightly inclined from the vertical. This results in an interest-ing variation in fluid flow, which may have important technological implications.The theoretical predictions are compared with the measurements obtained in watermodels. The detailed understanding of the hydrodynamics of the tundish flow canbe used to optimize the design for steel cleanliness. Key words:  continuous casting tundishes      three-dimensional turbulent fluid field      mixing      residence time distribution      Received:  18 February 1988      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1988/V24/I2/147 1 Hashio M, Tokuda M, Kawasaki M, Watanabe T. 2nd Process Tech Conf, Chicago: ISS-AIME, 1981: 65 2 Kemeny F L, Harris D J, McLean A, Meadoweroft T R, Young J D. 2nd Process Tech Conf, Chicago: ISS-AIME, 1981: 232 3 Mcpherson N A, Henderson S. Ironmaking Steelmaking, 1983; 10(6) : 259 4 Hamagami K, Sovimachi K, Kuga M. Koshikawa T, Saigusa M. Steelmaking Proc, Pittsburgh: 1982; 65: 358 5 Yamagami A. Tate M, Masui A, Uchibori H. Steelmaking Proc, 1981; 64: 234 6 Nuri Y, Umezawa K, Ohashi T, Itoh R, Mizoguchi R, Yokoi S I. 106th ISIJ Meeting, Oct. 1983, No. S989 7 Kitamura M, Kojima S. Onishi T. Kawasaki S. Ironmaking Steelmaking, 1983; 10(2) : 82 8 Debroy T, Sychterz J A. Metall Trans, 1985; 16B(9) : 497 9 EL-Kaddah N, Szekely J, J Met. 1984; 36(12) : 15 10 Launder B E, Spalding D B. Comput Method Appl Mech Eng, 1974; 3: 269 11 Launder B E, Spalding D B. Heat Transfer Section Report, № HTS/73/2, Imperial College, London, 1973 12 Gosman A D, Launder B E, Whitelaw J H. TEACH-2E, Internal Report, Mech Eng Dept, Imperial College, London, 19768 [1] Chang LIU, Shusen LI, Lifeng ZHANG. Simulation of Gas-Liquid Two-Phase Flow and Mixing Phenomena During RH Refining Process[J]. 金属学报, 2018, 54(2): 347-356. [2] Mingfan QI, Yonglin KANG, Bing ZHOU, Guoming ZHU, Huanhuan ZHANG. MICROSTRUCTURES AND PROPERTIES OF AZ91D MAGNESIUM ALLOY PRODUCED BY FORCED CONVECTION MIXING RHEO-DIECASTING PROCESS[J]. 金属学报, 2015, 51(6): 668-676. [3] ZHANG Fengying TAN Hua CHEN Jing LIN Xin HUANG Weidong. INFLUENCE OF MIXING ENTHALPY ON THE MICROSTRUCTURE OF LASER MULTILAYER DEPOSITED Ti–6Al–4V ALLOY[J]. 金属学报, 2012, 48(2): 159-163. [4] GUO Deyan SONG Jiajia CAI Liang MAO Yong. EFFECTS OF MELT MIXING WITH HIGH AND LOW TEMPERATURE MELTS ON SOLIDIFACATION MICROSTRUCTURES OF Au-20Sn EUTECTIC ALLOY[J]. 金属学报, 2012, 48(11): 1387-1393. [5] FAN Jianzhong;SANG Jimei;ZHANG Yongzhong;ZHANG Kui;ZHANG Shaoming;SHI Likai (General Research Institute for Non-ferrous Metal; Beijing 100088). THE SPATIAL DISTRIBUTION OF REINFORCEMENTS IN ALUMINIUM MATRIX COMPOSITES[J]. 金属学报, 1998, 34(11): 1199-1204. [6] ZHU Miaoyong(Northeastern University;Shenyang 110006);SAW ADA Ikuo (Nippon Steel Corporation; Kawasaki 211;Japan). NUMERICAL SIMULATION OF THREE-DIMENSIONAL TURBULENT FLOW IN CONTINUOUS CASTING TUNDISHES[J]. 金属学报, 1997, 33(11): 1215-1221. [7] ZHANG Wei;XUE Qunji;ZHANG Xushou(Laboratory of Solid Lubrication; Lanzhou Institute of Chemical Physics; The Chinese Academy of Sciences;Lanzhou 730000). THE INFLUENCE OF ION BEAM BOMBARDMENT TO THE TRIBOLOGICAL PERFORMANCE OF MULTILAYER FILM[J]. 金属学报, 1997, 33(11): 1165-1170. [8] LI Baokuan; HE Jicheng (Northeastern University; Shenyang 110006)(Manuscript received 1995-09-21;in revised form 1995-12-08). NUMERICAL COMPUTATION OF MIXING PROCESSES IN BATH OF BOTTOM STIRRING ELECTRIC ARC FURNACE[J]. 金属学报, 1996, 32(5): 495-501. [9] ZHU Miaoyong; (Department of Ferrous Metallurgy; Northeastern University;Shenyang 110006) INOMOTO Takeo; XIAO Zeqiang(Northeastern University; Shenyang 110006)(Nippon Steel Corporation; Futtsu; Japan). MATHEMATICAL AND PHYSICAL MODELING OF FLOW AND MIXING IN LADLES STIRRED BY ARGON THROUGH MULTI-TUYERE[J]. 金属学报, 1995, 31(22): 435-439. [10] ZHU Miaoyong; SW ADA Ikuo; XIAO Zeqiang (Northeastern University; Shenyang 110006)(Nippon Steel Corporation; Kawasaki 211 Japan)(Manuscript received 1994-03-30; in revised form. 1995-03-13). PHENOMENA OF THREE-DIMENSIONAL FLOW AND MIXING IN ARGON-STIRRED LADLES[J]. 金属学报, 1995, 31(20): 346-352. [11] LI Shengli;WANG Peixuan (University of Scicnce and Technology Beijing); YAN Fengzhang (Beijing Normal University); MA Ruzhang(University of Science and Technology Beijing)(Manuscript received 28 April;1993). STRUCTURE AND PROPERTIES OF Fe-Dy MULTILAYER IMPLANTED WITH Ar~(+)[J]. 金属学报, 1994, 30(4): 160-163. [12] LI Baokuan;HE Jicheng;LU Zhongwu Northeast University of Technology; Shenyang doctor;Department of Thermal Eneragy Northeast University of Technology; Shenyang 110006. NUMERICAL SIMULATION ON FLOW AND MIXING PROCESSES IN BOTTOM BLOWN LADLES[J]. 金属学报, 1993, 29(4): 47-51. [13] YU Hualong;ZHU Jiankang;WANG Zhichang Northeast University of Technology; Shenyang Correspondent; professor; Department of Non-Ferrous Metallurgy; Northeast University of Technology; Shenyang 11006. ENTHALPIES OF MIXING FOR PbCl_2-NaCl-BaCl_2 TERNARY MOLTEN SALT MIXTURES[J]. 金属学报, 1992, 28(5): 90-92. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed