Please wait a minute...
金属学报  2026, Vol. 62 Issue (5): 685-704    DOI: 10.11900/0412.1961.2026.00062
  综述 本期目录 | 过刊浏览 |
基于空间站的金属材料研究进展
胡亮, 王海鹏, 魏炳波()
西北工业大学 物理科学与技术学院 西安 710072
Research Progress of Metallic Materials Under Space Station Conditions
HU Liang, WANG Haipeng, WEI Bingbo()
School of Physical Science and Technology, Northwestern Polytechnical University, Xi'an 710072, China
引用本文:

胡亮, 王海鹏, 魏炳波. 基于空间站的金属材料研究进展[J]. 金属学报, 2026, 62(5): 685-704.
Liang HU, Haipeng WANG, Bingbo WEI. Research Progress of Metallic Materials Under Space Station Conditions[J]. Acta Metall Sin, 2026, 62(5): 685-704.

全文: PDF(3804 KB)   HTML
摘要: 

外层空间为研究金属材料物理化学性质、相变过程机制及组织和性能调控提供了超常环境条件。特别是对于高温和高活性金属材料的制备、实施原位资源利用和空间制造具有重要科学意义和应用价值。本文综述了自20世纪60年代以来,利用空间实验条件开展金属材料研究的主要工作,总结了中国空间站、国际空间站、和平号空间站的材料科学实验平台及其主要功能,重点分析了熔体流动、液态性质、凝固组织、舱外暴露等方面的研究进展,阐明了空间实验呈现的特殊现象和新规律。最后,对面向空间制造的金属材料的研究和发展趋势进行了展望。

关键词 : 空间站,  电磁悬浮,  静电悬浮,  热物理性质,  深过冷,  快速凝固    
Abstract:

Outer space provides unique environmental conditions for investigating the physical and chemical properties of metallic materials, the mechanisms of phase transformation processes, and the regulation of microstructure and performance. In particular, it has considerable scientific significance and application value for the preparation of high-temperature, highly active metallic materials, as well as for the implementation of in situ resource utilization and space manufacturing. This study reviews the main research on metallic materials conducted under space experimental conditions since the 1960s and summarizes the materials science experimental platforms and their main functions on the Chinese Space Station, the International Space Station, and the Mir Space Station. Research progress in aspects such as melt flow, liquid properties, solidification structure, and extravehicular exposure is analyzed. The special phenomena and new laws unveiled through space experiments are clarified. Finally, the research and development trends of metallic materials for space manufacturing are prospected.

Key words: space station    electromagnetic levitation    electrostatic levitation    thermophysical property    undercooling    rapid solidification
收稿日期: 2026-03-02     
ZTFLH:  TG111  
基金资助:国家自然科学基金项目(52088101);国家重点研发计划项目(2025YFF0520200);载人空间站空间科学与应用项目(KJZ-YY-NCL401);载人空间站空间科学与应用项目(KJZ-YY-NCL0501)
通讯作者: 魏炳波,bbwei@nwpu.edu.cn,主要从事空间材料科学技术的研究
Corresponding author: WEI Bingbo, professor, Tel: (029)88431669, E-mail: bbwei@nwpu.edu.cn
作者简介: 胡 亮,男,1982年生,教授,博士
图1  中国空间站相关的实验装置:搭载于“实践十号”卫星的材料多功能炉[11]和“天宫二号”空间实验室的材料实验炉,以及无容器材料实验柜(CMER),高温材料实验柜(HTMR)和材料舱外暴露实验装置
图2  国际空间站搭载的主要材料科学实验装置:材料科学研究柜(MSRR-MSL)及低梯度炉(LGF),电磁悬浮(EML)装置[19,20],静电悬浮炉(ELF)[28,29],微重力手套箱(MSG)[30],及X射线实时成像装置(XRMON)[31,32]
图3  和平号空间站搭载的实验装置:微重力隔离装置(MIM)[33],空间集成热分析管式炉(TITUS)[37],空间加速度测量[33],及MSG[33]
图4  空间熔体流动的典型结果:硅油液桥中的Marangoni流场[38],电磁悬浮Pd-Si合金熔体内部的流动图像[42],ESL和EML条件下的熔体流速[44],及CSS中Zr-V合金液滴的流场[45]
Alloy

ρL

g·cm-3

cp

J·mol-1·K-1

γL

N·m-1

ηL

mPa·s

Experimental methodRef.
LEK947.5743.521.678.40ISS-EML[55]
MC27.9140.611.6911.90ISS-EML[55]
CMSX-108.2144.431.708.60ISS-EML[55]
Fe60Cr21Ni19-43.14--ISS-EML[54]
Fe75Cu258.14-1.265.07ISS-ELF[59]
Fe50Cu507.28-1.253.87ISS-ELF[59]
Fe-19%Si (mass fraction, the same below)6.19-1.4429.80CSS-CMER[60]
Ti-6Al-4V4.0942.611.493.30ISS-EML[61]
Ti48Al48Nb2Cr23.5641.931.246.10TEMPUS[62]
Ti46Al46Nb84.2353.981.196.20TEMPUS[63]
Ti46Al46Ta84.8964.071.216.90TEMPUS[63]
Ti47.5Ni47.5V56.02---CSS-CMER[64]
表1  由空间实验测定的镍基、铁基和钛基合金的液态热物理性质[54,55,59~64]
Amorphous alloy

ρL

g·cm-3

cp

J·mol-1·K-1

γL

N·m-1

ηL

mPa·s

Experimental methodRef.
Zr64Ni36-44.871.55-TEMPUS[65]
Ni60Nb40-47.60--TEMPUS[65]
Cu50Zr50--1.5818.23ISS-EML[69]
Pd76Cu6Si18--1.4046.75TEMPUS[66]
Pd43Cu27Ni10P20--1.5399.76TEMPUS[68]
Ti34Zr11Cu47Ni8--1.39-TEMPUS[66]
Fe57.75Ni19.25Mo10C5B87.4346.321.6831.62ISS-EML[72]
Zr52.5Cu17.9Ni14.6Al10Ti541.571.6155.37ISS-EML[71]
Zr58.5Cu15.6Ni12.8Al10.3Nb2.8-36.78-177.60ISS-EML[54]
表2  空间实验测定的非晶合金的液态热物理性质[54,65,66,68,69,71,72]
Material

ρL

g·cm-3

cp / εT

J·mol-1·K-1

γL

N·m-1

ηL

mPa·s

Experimental methodRef.
Zr6.15-1.204.90ISS-ELF[73]
Pt19.23---ISS-ELF[74]
Au17.33-1.114.40ISS-ELF[51]
Nb82.7Si17.37.42143.561.70-CSS-CMER[46]
Nb84.1Si15.97.51133.41--CSS-CMER[45]
Nb72Si22Zr67.19---CSS-CMER[75]
Zr64V366.13---CSS-CMER[46]
Zr50V506.08---CSS-CMER[46]
表3  由空间静电悬浮实验测定的难熔及稀有金属/合金液态热物理性质[45,46,51,73~75]
图5  空间定向凝固典型研究结果:Al-7%Si (质量分数,下同)合金的柱状晶-等轴晶转变(CET)[17],Al-7%Si合金枝晶主干的平均间距[83],Al-20%Cu合金中机械和溶质阻塞CET转变机制[86],Al-MgSi2共晶合金的空间和地面定向生长凝固组织[87],以及铁基超导材料和地面样品的组织形貌[8]
图6  空间深过冷和快速凝固的典型研究结果:Zr80Pt20合金熔体形核速率因子与最大流动速率的关系[92,93],Fe90Ni10熔体中生成亚稳δ-Fe相时的温度-时间曲线[95],Ni50Al50合金熔体枝晶的生长速率[96],Al-Ni熔体枝晶的生长速率和Al-25%Ni (原子分数)合金在不同过冷度下的液固界面前沿形貌[97],及Cu-Zr和Zr-Cu-Ni合金熔体的枝晶生长速率[99]
图7  空间快速凝固过程中Nb82.7Si17.3共晶合金的解耦生长[100]:(Nb)和Nb3Si相的分别领先生长,(Nb)枝晶和Nb3Si枝晶形貌,(Nb)和Nb3Si相的HAADF-STEM像、SAED花样和原子分布图,及不同过冷度和润湿因子时的形核率和液固界面迁移速率
图8  空间快速凝固条件下样品的收缩、显微组织形貌和缩孔率:不同过冷度下的Nb82.7Si17.3合金球形样品及其内部和表面组织形貌[46],Nb82.7Si17.3合金缩孔内自由生长的(Nb)枝晶和(Zr)枝晶形貌[104],Ti47.5Ni47.5V5合金凝固收缩产生的表面褶皱[64],以及Fe-19%Si合金的缩孔率和液滴内部形貌[60]
图9  Zr-V合金的空间快速凝固形成:中国空间站静电悬浮装置示意图及高温球形液滴[102],Zr64V36合金表面波纹和波纹内部的波纹状结构[105],(Zr)和V2Zr两相组成的螺旋状微结构[105],以及相互连接、并排、反向连接螺旋微结构形貌和示意图[105]
图10  空间环境中Ti-Co-Gd合金的液液相分离和凝固[47]:温度曲线,相分离微观组织形貌,富Gd相小液滴直径的分布规律,及空间和地面上液-液分解过程中微观结构形成示意图
[1] Walter H U, translated by Ge P W, Wang J T. Fluid Sciences and Materials Science in Space [M]. Beijing: China Science and Technology Press, 1991: 243
[1] 瓦尔特著, 葛培文, 王景涛 译. 空间流体科学与空间材料科学 [M]. 北京: 中国科学技术出版社, 1991: 243
[2] Ruan Y, Hu L, Yan N, et al. Recent advances and future perspectives of space materials science [J]. Sci. Sin. Technol., 2020, 50: 603
[2] 阮 莹, 胡 亮, 闫 娜 等. 空间材料科学研究进展与未来趋势 [J]. 中国科学: 技术科学, 2020, 50: 603
[3] Kurz W, Rappaz M, Trivedi R. Progress in modelling solidification microstructures in metals and alloys. Part II: Dendrites from 2001 to 2018 [J]. Int. Mater. Rev., 2021, 66: 30
doi: 10.1080/09506608.2020.1757894
[4] Zhai W, Chang J, Geng D L, et al. Progress and prospect of solidification research for metallic materials [J]. Chin. J. Nonferrous Met., 2019, 29: 1953
[4] 翟 薇, 常 健, 耿德路 等. 金属材料凝固过程研究现状与未来展望 [J]. 中国有色金属学报, 2019, 29: 1953
[5] Mohr M, Dong Y, Bracker G P, et al. Electromagnetic levitation containerless processing of metallic materials in microgravity: Thermophysical properties [J]. npj Microgravity, 2023, 9: 34
doi: 10.1038/s41526-023-00281-4 pmid: 37130899
[6] Matson D M, Battezzati L, Galenko P K, et al. Electromagnetic levitation containerless processing of metallic materials in microgravity: Rapid solidification [J]. npj Microgravity, 2023, 9: 65
doi: 10.1038/s41526-023-00310-2 pmid: 37582930
[7] Gu Y D, Gao M, Zhao G H, et al. Recent progress in space science and applications on Chinese Space Station in 2022-2024 [J]. Chin. J. Space Sci., 2024, 44: 607
doi: 10.11728/cjss2024.04.2024-yg09
[8] Yu J D, Zhang W, Yang S, et al. Recent advances and future prospects of Space Materials Science [J]. Rev. Mater. Res., 2025, 1: 100065
[9] Da D A, Huang L P, Xie X, et al. First material processing experiment in space microgravity made by China [J]. Chin. Space Sci. Technol., 1988, 8(6): 4
[9] 达道安, 黄良甫, 谢 燮 等. 我国首次空间微重力下的材料加工试验 [J]. 中国空间科学技术, 1988, 8(6): 4
[10] Ge P W, Nishinaga T, Li C R, et al. Growth of GaSb single crystal in space [J]. Sci. China, 2001, 31A: 56
[10] 葛培文, 西永颂, 李超荣 等. GaSb单晶空间生长 [J]. 中国科学, 2001, 31A: 56
[11] Yin Z G, Zhang X W, Pan X H. Crystal growth from melts: Materials science program in the SJ-10——Recoverable scientific experiment satellite [J]. Physics, 2016, 45: 213
[11] 尹志岗, 张兴旺, 潘秀红. 空间熔体材料科学: 实践十号返回式科学实验卫星 [J]. 物理, 2016, 45: 213
[12] Zhang X W, Yin Z G, Yu J D, et al. Space materials science in China: I. Experiment studies under microgravity [J]. Chin. J. Space Sci., 2020, 40: 946
doi: 10.11728/cjss2020.05.946
[13] Zhang P, Zhang Y, Wang Z L, et al. 1D and 3D co-simulation and self-adaptive position control of electrostatic levitation in China's Space Station [J]. npj Microgravity, 2022, 8: 29
doi: 10.1038/s41526-022-00215-6 pmid: 35918349
[14] Wang D S, Lv H Y, Hu M, et al. In-orbit flight tests of operational behavior of space lubricated bearings [J]. Bearing, 2025, (4): 80
[14] 王德生, 吕宏宇, 胡 明 等. 空间润滑轴承运转行为的在轨飞行试验 [J]. 轴承, 2025, (4): 80
[15] Enz T, Steinbach S, Simicic D, et al. First experiments using the materials science laboratory on board the International Space Station [J]. Microgravity Sci. Technol., 2011, 23: 345
doi: 10.1007/s12217-010-9254-1
[16] Jarvis D J, Voss D. IMPRESS Integrated Project—An overview paper [J]. Mater. Sci. Eng., 2005, A413-414: 583
[17] Zimmermann G, Sturz L, Billia B, et al. Investigation of columnar-to-equiaxed transition in solidification processing of AlSi alloys in microgravity—The CETSOL project [J]. J. Phys. Conf. Ser., 2011, 327: 012003
[18] Friedrich J, Dagner J, Hainke M, et al. Numerical modeling of crystal growth and solidification experiments carried out under microgravity conditions [J]. Cryst. Res. Technol., 2003, 38: 726
doi: 10.1002/crat.v38:7/8
[19] Seidel A, Soellner W, Stenzel C. EML—An electromagnetic levitator for the International Space Station [J]. J. Phys. Conf. Ser., 2011, 327: 012057
[20] Soellner W, Seidel A, Stenzel C, et al. EML-containerless processing facility for material science research onboard the ISS [J]. J. Japan Soc. Microgravity Appl., 2010, 27: 183
[21] Hu L, Lu X Y, Hou Z M. Progress in electrostatic levitation technology [J]. Physics, 2007, 36: 944
[21] 胡 亮, 鲁晓宇, 侯智敏. 静电悬浮技术研究进展 [J]. 物理, 2007, 36: 944
[22] Paradis P F, Ishikawa T, Lee G W, et al. Materials properties measurements and particle beam interactions studies using electrostatic levitation [J]. Mater. Sci. Eng., 2014, R76: 1
[23] Rhim W K, Chung S K, Barber D, et al. An electrostatic levitator for high-temperature containerless materials processing in 1-g [J]. Rev. Sci. Instrum., 1993, 64: 2961
doi: 10.1063/1.1144475
[24] Meister T, Lohoefer G, Unbehauen H, Development of an electrostatic levitator for containerless processing [J]. Acta Photonica Sin., 1999, 28: 14
[25] Sung Y S, Takeya H, Togano K. Containerless solidification of Si, Zr, Nb, and Mo by electrostatic levitation [J]. Rev. Sci. Instrum., 2001, 72: 4419
doi: 10.1063/1.1419226
[26] Hu L, Wang H P, Xie W J, et al. Electrostatic levitation under the single-axis feedback control condition [J]. Sci. China Phys. Mech. Astron., 2010, 53: 1438
doi: 10.1007/s11433-010-4068-0
[27] Lee G W, Jeon S, Park C, et al. Crystal-liquid interfacial free energy and thermophysical properties of pure liquid Ti using electrostatic levitation: Hypercooling limit, specific heat, total hemispherical emissivity, density, and interfacial free energy [J]. J. Chem. Thermodyn., 2013, 63: 1
doi: 10.1016/j.jct.2013.03.012
[28] Ishikawa T, Okada J T, Watanebe Y, et al. Thermophysical property measurements of oxide melts at high temperature by electrostatic levitation furnace on the ISS [J]. Int. J. Microgravity Sci. Appl., 2015, 32: 320410
[29] Tamaru H, Koyama C, Saruwatari H, et al. Status of the electrostatic levitation furnace (ELF) in the ISS-KIBO [J]. Microgravity Sci. Technol., 2018, 30: 643
doi: 10.1007/s12217-018-9631-8
[30] Grugel R N, Luz P, Smith G, et al. Materials research conducted aboard the International Space Station: Facilities overview, operational procedures, and experimental outcomes [J]. Acta Astronaut., 2008, 62: 491
doi: 10.1016/j.actaastro.2008.01.013
[31] Nguyen-Thi H, Reinhart G, Salloum Abou Jaoude G, et al. XRMON-GF: A novel facility for solidification of metallic alloys with in situ and time-resolved X-ray radiographic characterization in microgravity conditions [J]. J. Cryst. Growth, 2013, 374: 23
doi: 10.1016/j.jcrysgro.2013.03.032
[32] Murphy A G, Mathiesen R H, Houltz Y, et al. Direct observation of spatially isothermal equiaxed solidification of an Al-Cu alloy in microgravity on board the MASER 13 sounding rocket [J]. J. Cryst. Growth, 2016, 454: 96
doi: 10.1016/j.jcrysgro.2016.08.054
[33] Schlagheck R A, Trach B L. Microgravity research results and experiences from the NASA/MIR space station program [J]. Acta Astronaut., 2003, 53: 983
pmid: 14503490
[34] Shirkhanzadeh M. Analysis of the data obtained from liquid metal diffusion experiments conducted on the MIR space station [J]. Acta Astronaut., 2009, 64: 256
doi: 10.1016/j.actaastro.2008.06.025
[35] Stoichev N V, Yaneva S B, Regel L L, et al. Eutectic solidification of Al-Cu alloys influenced by convection [J]. Adv. Space Res., 1988, 8: 171
[36] Bewersdorff A, Görler G P, Otto G, et al. Solidification of silver-germanium alloys in an amorphous matrix aboard the Space Station Mir [J]. Acta Astronaut., 1993, 29: 547
doi: 10.1016/0094-5765(93)90059-6
[37] Weiβ A, Zimmermann G, Camel D. Investigation on solidification structures in the TITUS furnace onboard the MIR station [A]. Proceedings of the First International Symposium on Microgravity Research and Applications in Physical Sciences and Biotechnology [C]. Sorrento, Italy: European Space Agency, 2000: 683
[38] Napolitano L G. Marangoni convection in space microgravity environments [J]. Science, 1984, 225: 197
pmid: 17837940
[39] Arafune K, Hirata A. Thermal and solutal Marangoni convection in In-Ga-Sb system [J]. J. Cryst. Growth, 1999, 197: 811
doi: 10.1016/S0022-0248(98)01071-9
[40] Okano Y, Umemura S, Enomoto Y, et al. Numerical study of Marangoni convection effect on the melting of GaSb/InSb/GaSb [J]. J. Cryst. Growth, 2002, 235: 135
doi: 10.1016/S0022-0248(01)01839-5
[41] Matson D M, Xiao X, Rodriguez J E, et al. Use of thermophysical properties to select and control convection during rapid solidification of steel alloys using electromagnetic levitation on the space station [J]. JOM, 2017, 69: 1311
doi: 10.1007/s11837-017-2396-5
[42] Hyers R W, Trapaga G, Abedian B. Laminar-turbulent transition in an electromagnetically levitated droplet [J]. Metall. Mater. Trans., 2003, 34B: 29
[43] Song S P, Li B Q. Free surface profiles and thermal convection in electrostatically levitated droplets [J]. Int. J. Heat Mass Transfer., 2000, 43: 3589
doi: 10.1016/S0017-9310(00)00004-1
[44] Hyers R W. Fluid flow effects in levitated droplets [J]. Meas. Sci. Technol., 2005, 16: 394
doi: 10.1088/0957-0233/16/2/010
[45] Chang J, Wang H P, Liao H, et al. Remarkable undercooling capability and metastable thermophysical properties of liquid Nb84.1Si15.9 alloy revealed by electrostatic levitation in outer space [J]. Rev. Sci. Instrum., 2024, 95: 034501
[46] Wang H P, Hu L, Xie W J, et al. Metastable liquid properties and surface flow patterns of ultrahigh temperature alloys explored in outer space [J]. Angew. Chem. Int. Ed., 2024, 63: e202400312
doi: 10.1002/anie.v63.15
[47] Zhao J Z, Sun H, Zhang L L, et al. In-situ composite microstructure formation of immiscible alloy solidified in space [J]. Natl. Sci. Rev., 2023, 10: nwac261
doi: 10.1093/nsr/nwac261
[48] Hibiya T, Egry I. Thermophysical property measurements of high temperature melts: Results from the development and utilization of space [J]. Meas. Sci. Technol., 2005, 16: 317
doi: 10.1088/0957-0233/16/2/001
[49] Bracker G P, Luo Y, Damaschke B, et al. Examining the influence of turbulence on viscosity measurements of molten germanium under reduced gravity [J]. npj Microgravity, 2022, 8: 53
doi: 10.1038/s41526-022-00238-z pmid: 36433973
[50] Xiao X, Brillo J, Lee J, et al. Impact of convection on the damping of an oscillating droplet during viscosity measurement using the ISS-EML facility [J]. npj Microgravity, 2021, 7: 36
doi: 10.1038/s41526-021-00166-4 pmid: 34611162
[51] Nawer J, Ishikawa T, Oda H, et al. Uncertainty analysis and performance evaluation of thermophysical property measurement of liquid Au in microgravity [J]. npj Microgravity, 2023, 9: 38
doi: 10.1038/s41526-023-00277-0 pmid: 37225716
[52] Hu J L, Wang P, Huang F Q, et al. Gravitational effects and key issues in melt diffusion measurements [J]. Sci. Sin. Technol., 2025, 55: 2041
doi: 10.1360/SST-2025-0235
[52] 胡金亮, 王 鹏, 黄非奇 等. 熔体扩散测量中的重力效应与关键问题 [J]. 中国科学: 技术科学, 2025, 55: 2041
[53] Frohberg G, Kraatz K H, Wever H. Selfdiffusion of Sn112 and Sn124 in liquid tin [A]. Proceedings of the 5th European Symposium on Materials Sciences Under Microgravity [C]. Schloß Elmau: European Space Agency, 1984: 201
[54] Mohr M, Fecht H J. Investigating thermophysical properties under microgravity: A review [J]. Adv. Eng. Mater., 2021, 23: 2170006
doi: 10.1002/adem.v23.2
[55] Mohr M, Wunderlich R, Dong Y, et al. Thermophysical properties of advanced Ni-based superalloys in the liquid state measured on board the International Space Station [J]. Adv. Eng. Mater., 2020, 22: 1901228
doi: 10.1002/adem.v22.4
[56] Nawer J, Stanford B, Kolbe M, et al. Thermodynamic assessment of evaporation during molten steel testing onboard the International Space Station [J]. npj Microgravity, 2024, 10: 77
doi: 10.1038/s41526-024-00416-1 pmid: 39030203
[57] Watanabe M, Onodera K, Tanaka K, et al. Interfacial phenomena and thermophysical properties of molten steel and oxides [J]. Int. J. Microgravity Sci. Appl., 2016, 33: 330212
[58] Ishikawa T, Oda H, Koyama C, et al. Density of a molten stainless Steel-B4C Alloy measured in the electrostatic levitation furnace onboard the International Space Station [J]. Int. J. Microgravity Sci. Appl., 2025, 42: 420202
[59] Seimiya Y, Kobatake H, Tono-Oka K, et al. Thermophysical properties of molten Fe-Cu alloy measured using the electrostatic levitation furnace aboard the International Space Station (ISS-ELF) under microgravity conditions [J]. ISIJ Int., 2024, 64: 2253
doi: 10.2355/isijinternational.ISIJINT-2024-277
[60] Hu L, Xie W J, Wan Z X, et al. Space station based experimental research on thermophysical properties and solidification mechanisms of Fe-19%Si alloy [J]. Rev. Mater. Res., 2025, 1: 100005
[61] Mohr M, Wunderlich R, Novakovic R, et al. Precise measurements of thermophysical properties of liquid Ti-6Al-4V (Ti64) alloy on board the International Space Station [J]. Adv. Eng. Mater., 2020, 22: 2000169
doi: 10.1002/adem.v22.7
[62] Wunderlich R K, Mohr M, Dong Y, et al. Thermophysical properties of the TiAl-2Cr-2Nb alloy in the liquid phase measured with an electromagnetic levitation device on board the International Space Station, ISS-EML [J]. Int. J. Mater. Res., 2021, 112: 770
doi: 10.1515/ijmr-2021-8266
[63] Wunderlich R K, Hecht U, Hediger F, et al. Surface Tension, Viscosity, and selected thermophysical properties of Ti48Al48Nb2Cr2, Ti46Al46Nb8, and Ti46Al46Ta8 from microgravity experiments [J]. Adv. Eng. Mater., 2018, 20: 1800346
doi: 10.1002/adem.v20.12
[64] Liu D N, Wang H P, Liao H, et al. Wrinkled shrinkage on surface monophasic structure of floating refractory alloy droplets solidified in space environment [J]. Adv. Funct. Mater., 2025, 35: 2415364
doi: 10.1002/adfm.v35.7
[65] Snyder R S. Second International Microgravity Laboratory (IML-2) final report [R]. Washington: National Aeronautics and Space Administration, 1997
[66] Robinson M B. Microgravity Science Laboratory (MSL-1) final report [R]. Huntsville, Alabama: NASA Marshall Space Flight Center, 1998
[67] Wunderlich R K, Fecht H J. Thermophysical properties of bulk metallic glass forming alloys in the stable and undercooled liquid—A microgravity investigation [J]. Mater. Trans., 2001, 42: 565
doi: 10.2320/matertrans.42.565
[68] Mohr M, Wunderlich R K, Zweiacker K, et al. Surface tension and viscosity of liquid Pd43Cu27Ni10P20 measured in a levitation device under microgravity [J]. npj Microgravity, 2019, 5: 4
doi: 10.1038/s41526-019-0065-4
[69] Mohr M, Wunderlich R K, Koch S, et al. Surface tension and viscosity of Cu50Zr50 measured by the oscillating drop technique on board the International Space Station [J]. Microgravity Sci. Technol., 2019, 31: 177
doi: 10.1007/s12217-019-9678-1
[70] Van Hoesen D C, Gangopadhyay A K, Lohöfer G, et al. Resistivity saturation in metallic liquids above a dynamical crossover temperature observed in measurements aboard the international space station [J]. Phys. Rev. Lett., 2019, 123: 226601
doi: 10.1103/PhysRevLett.123.226601
[71] Mohr M, Wunderlich R K, Hofmann D C, et al. Thermophysical properties of liquid Zr52.5Cu17.9Ni14.6Al10Ti5—Prospects for bulk metallic glass manufacturing in space [J]. npj Microgravity, 2019, 5: 24
doi: 10.1038/s41526-019-0084-1 pmid: 31667336
[72] Mohr M, Hofmann D C, Fecht H J. Thermophysical properties of an Fe57.75Ni19.25Mo10C5B8 glass-forming alloy measured in microgravity [J]. Adv. Eng. Mater., 2021, 23: 2001143
doi: 10.1002/adem.v23.3
[73] Nawer J, Matson D M. Quantifying facility performance during thermophysical property measurement of liquid Zr using Electrostatic Levitation [J]. High Temp.-High Pressures, 2023, 52: 123
doi: 10.32908/hthp.v52.1315
[74] Nawer J, Ishikawa T, Oda H, et al. Uncertainty quantification of thermophysical property measurement in space and on earth: A study of liquid platinum using electrostatic levitation [J]. J. Astron. Space Sci., 2023, 40: 93
doi: 10.5140/JASS.2023.40.3.93
[75] Wang H P, Liao H, Wang Y B, et al. Solidification mechanism and microstructure evolution of refractory Nb-Si and Nb-Si-Zr alloys aboard China Space Station [J]. Sci. Sin. Technol., 2025, 55: 1989
doi: 10.1360/SST-2025-0284
[75] 王海鹏, 廖 晖, 王彦博 等. 中国空间站难熔Nb-Si和Nb-Si-Zr合金凝固组织形成机理研究 [J]. 中国科学: 技术科学, 2025, 55: 1989
[76] Nguyen Thi H, Dabo Y, Drevet B, et al. Directional solidification of Al-1.5 wt% Ni alloys under diffusion transport in space and fluid-flow localisation on earth [J]. J. Cryst. Growth, 2005, 281: 654
doi: 10.1016/j.jcrysgro.2005.04.061
[77] Nabavizadeh S A, Upadhyay S, Eshraghi M, et al. Spurious grain formation due to Marangoni convection during directional solidification of alloys in µ-g environment of International Space Station [J]. J. Cryst. Growth, 2021, 574: 126334
doi: 10.1016/j.jcrysgro.2021.126334
[78] Ghods M, Upadhyay S R, Rajamure R S, et al. Primary dendrite array morphology in Al-7 wt% Si alloy samples directionally solidified aboard the International Space Station [J]. J. Cryst. Growth, 2021, 562: 126077
doi: 10.1016/j.jcrysgro.2021.126077
[79] Li Y Z, Mangelinck-Noël N, Zimmermann G, et al. Modification of the microstructure by rotating magnetic field during the solidification of Al-7 wt.% Si alloy under microgravity [J]. J. Alloys Compd., 2020, 836: 155458
doi: 10.1016/j.jallcom.2020.155458
[80] Jia Y L, Zhang Y J, Shi Z K, et al. Review of the formation mechanism and control technology for freckle defects in directionally solidified superalloys [J]. Acta Metall. Sin., 2026, 62: 309
doi: 10.11900/0412.1961.2025.00109
[80] 贾玉亮, 张勇佳, 史泽楷 等. 高温合金定向凝固雀斑形成机理及控制技术研究进展 [J]. 金属学报, 2026, 62: 309
doi: 10.11900/0412.1961.2025.00109
[81] Liu D R, Mangelinck-Noël N, Gandin C A, et al. Structures in directionally solidified Al-7 wt.% Si alloys: Benchmark experiments under microgravity [J]. Acta Mater., 2014, 64: 253
doi: 10.1016/j.actamat.2013.10.038
[82] Mirihanage W U, Browne D J, Zimmermann G, et al. Simulation of international space station microgravity directional solidification experiments on columnar-to-equiaxed transition [J]. Acta Mater., 2012, 60: 6362
doi: 10.1016/j.actamat.2012.08.015
[83] Li Y Z, Mangelinck-Noël N, Zimmermann G, et al. Comparative study of directional solidification of Al-7 wt% Si alloys in Space and on Earth: Effects of gravity on dendrite growth and Columnar-to-equiaxed transition [J]. J. Cryst. Growth, 2019, 513: 20
doi: 10.1016/j.jcrysgro.2019.02.050
[84] Murphy A G, Reinhart G, Nguyen-Thi H, et al. Meso-scale modelling of directional solidification and comparison with in situ X-ray radiographic observations made during the MASER-12 XRMON microgravity experiment [J]. J. Alloys Compd., 2013, 573: 170
doi: 10.1016/j.jallcom.2013.04.027
[85] Abou-Khalil L, Salloum-Abou-Jaoude G, Reinhart G, et al. Influence of gravity level on columnar-to-equiaxed transition during directional solidification of Al-20 wt.% Cu alloys [J]. Acta Mater., 2016, 110: 44
doi: 10.1016/j.actamat.2016.03.007
[86] Ngomesse F, Reinhart G, Soltani H, et al. In situ investigation of the columnar-to-equiaxed transition during directional solidification of Al-20 wt.%Cu alloys on Earth and in microgravity [J]. Acta Mater., 2021, 221: 117401
doi: 10.1016/j.actamat.2021.117401
[87] Pan M X, Li S P, Zhao D Q, et al. Directional growth of Al-Mg2Si eutectic alloy in the SZ2 unmanned spaceship [J]. Sci. China, 2003, 46A: 158
[87] 潘明祥, 李顺朴, 赵德乾 等. Al-Mg2Si共晶合金在“神舟2号”飞船上定向复合生长 [J]. 中国科学, 2002, 32A: 725
[88] Luo X H, Huang Q, Liu B D, et al. Al-Al3Ni eutectic alloy and Al/WC(Ni) composite directionally solidified under microgravity and normal gravity [J]. Adv. Space Res., 2003, 32: 225
doi: 10.1016/S0273-1177(03)90255-9
[89] Bottin-Rousseau S, Witusiewicz V T, Hecht U, et al. Coexistence of rod-like and lamellar eutectic growth patterns [J]. Scr. Mater., 2022, 207: 114314
doi: 10.1016/j.scriptamat.2021.114314
[90] Hofmeister W H, Bayuzick R J, Hyers R, et al. Cavitation-induced nucleation of zirconium in low earth orbit [J]. Appl. Phys. Lett., 1999, 74: 2711
doi: 10.1063/1.123945
[91] Bracker G P, Schneider S, Wunderlich R, et al. Confirmation of anomalous nucleation in zirconium [J]. JOM, 2020, 72: 3140
doi: 10.1007/s11837-020-04257-7
[92] Gangopadhyay A K, Sellers M E, Bracker G P, et al. Demonstration of the effect of stirring on nucleation from experiments on the International Space Station using the ISS-EML facility [J]. npj Microgravity, 2021, 7: 31
doi: 10.1038/s41526-021-00161-9 pmid: 34362919
[93] Gangopadhyay A K, Sheng Y, Bracker G P, et al. Slower nucleation kinetics with stirring in a supercooled Zr80Pt20 liquid-Terrestrial and microgravity experiments on the International Space Station [J]. J. Chem. Phys., 2025, 162: 134502
doi: 10.1063/5.0263986
[94] Hermann R, Löser W, Lindenkreuz H G, et al. Metastable phase formation in undercooled Fe-Co melts under terrestrial and parabolic flight conditions [J]. Microgravity Sci. Technol., 2007, 19: 5
[95] Löser W, Woodcock T G, Shuleshova O, et al. Metastable solidification in undercooled liquid droplets of Fe-Ni based soft-magnetic alloys under terrestrial and microgravity conditions [J]. J. Phys. Conf. Ser., 2011, 327: 012005
[96] Galenko P K, Alexandrov D V, Toropova L V. Dendrite growth under a forced convective flow: A review [J]. Phys. Rep., 2024, 1085: 1
doi: 10.1016/j.physrep.2024.06.005
[97] Galenko P K, Toropova L V, Alexandrov D V, et al. Anomalous kinetics, patterns formation in recalescence, and final microstructure of rapidly solidified Al-rich Al-Ni alloys [J]. Acta Mater., 2022, 241: 118384
doi: 10.1016/j.actamat.2022.118384
[98] Binder S. Undercooling and solidification of tetragonal Ni2B under different convective flow conditions [D]. Bochum: Ruhr University Bochum, 2010
[99] Galenko P K, Wonneberger R, Koch S, et al. Bell-shaped “dendrite velocity-undercooling” relationship with an abrupt drop of solidification kinetics in glass forming Cu-Zr(-Ni) melts [J]. J. Cryst. Growth, 2020, 532: 125411
doi: 10.1016/j.jcrysgro.2019.125411
[100] Wang H P, Liao H, Chang J, et al. Decoupling effect stimulated independent dendrite growth of eutectic phases under microgravity and containerless states [J]. Mater. Today, 2024, 75: 386
doi: 10.1016/j.mattod.2024.04.009
[101] Wang H P, Zheng C H, Hu L, et al. Outer space cultivated regular eutectic cells with anomalous internal microstructures for rapidly solidifying Zr50V50 hypereutectic alloy [J]. J. Appl. Phys., 2025, 137: 045104
[102] Wang H P, Li H Z, Zheng C H, et al. Eutectic growth kinetics and microscopic mechanical property of refractory Zr57V43 alloy under space and ground conditions [J]. Acta Mater., 2025, 295: 121213
doi: 10.1016/j.actamat.2025.121213
[103] Zhu B F, Li C Y, Zhang S J, et al. Numerical simulation of the dynamic contraction of dendrite solidification in the Al-4.7%Cu alloy [J]. Acta Metall. Sin., 2026, 62: 509
doi: 10.11900/0412.1961.2024.00406
[103] 朱宝丰, 李晨宇, 张士杰 等. Al-4.7%Cu合金枝晶凝固动态收缩的数值模拟 [J]. 金属学报, 2026, 62: 509
doi: 10.11900/0412.1961.2024.00406
[104] Wang H P, Liao H, Hu L, et al. Freezing shrinkage dynamics and surface dendritic growth of floating refractory alloy droplets in outer space [J]. Adv. Mater., 2024, 36: 2313162
doi: 10.1002/adma.v36.24
[105] Wang H P, Liu D N, Zheng C H, et al. Spiral eutectic growth dynamics facilitated by space Marangoni convection and liquid surface wave [J]. Phys. Fluids, 2024, 36: 047137
[106] Jiang H X, Li W, Zhang L L, et al. Progress in the solidification of monotectic alloys under the microgravity condition of space [J]. Sci. Sin. Phys. Mech. Astron., 2020, 50: 047005
[106] 江鸿翔, 黎 旺, 张丽丽 等. 空间微重力条件下偏晶合金凝固研究进展 [J]. 中国科学: 物理学 力学 天文学, 2020, 50: 047005
[107] Li W, Jiang H X, Zhang L L, et al. Solidification of Al-Bi-Sn immiscible alloy under microgravity conditions of space [J]. Scr. Mater., 2019, 162: 426
doi: 10.1016/j.scriptamat.2018.12.010
[108] Samwel S W. Low earth orbital atomic oxygen erosion effect on spacecraft materials [J]. Space Res. J., 2014, 7: 1
doi: 10.3923/srj.2014.1.13
[109] Polturak E, Koren G, Ayalon M, et al. Design and performance of a space based high temperature superconductivity experiment [J]. Appl. Phys. Lett., 1999, 75: 1293
doi: 10.1063/1.124672
[110] Su Y, Li Y X, Zeng X Q. Progress in the study of radiation-resistant high-strength magnesium alloys for space station extravehicular exposure [J]. Sci. Sin. Technol., 2025, 55: 2101
doi: 10.1360/SST-2025-0254
[110] 苏 阳, 李扬欣, 曾小勤. 抗辐射高强韧镁合金的空间站舱外暴露研究进展 [J]. 中国科学: 技术科学, 2025, 55: 2101
[111] Wang X L, Zhou F, Liu W M. Effects of atomic oxygen and ultraviolet in low earth orbit on low surface energy polymer film [J]. J. Appl. Polym. Sci., 2011, 120: 329
doi: 10.1002/app.v120.1
[112] Gao X M, Hu M, Sun J Y, et al. Changes in the structure and tribological property of Ag film by LEO space environment exposure [J]. Appl. Surf. Sci., 2014, 320: 466
doi: 10.1016/j.apsusc.2014.08.197
[113] Liu R P, Zhang X Y, Zhao J H, et al. Solute distribution characteristics of Pd40Ni40P20 alloy solidified in microgravity and gravity conditions [J]. Acta Phys. Sin., 1997, 46: 819
doi: 10.7498/aps
[113] 刘日平, 张湘义, 赵建华 等. 重力及微重力条件下Pd40Ni40P20合金凝固组织中溶质原子的分布特征 [J]. 物理学报, 1997, 46: 819
[114] Wen P, Wang B B, Ding D W, et al. Research progress on some basic problems of bulk metallic glass under microgravity [J]. Mater. China, 2017, 36: 880
[114] 闻 平, 王彬彬, 丁大伟 等. 微重力条件下块体金属玻璃的若干基础问题研究进展 [J]. 中国材料进展, 2017, 36: 880
[115] Olive J R, Hofmeister W H, Bayuzick R J, et al. Formation of tetragonal YBa2Cu3O7 - δ from an undercooled melt [J]. J. Mater. Res., 1994, 9: 1
doi: 10.1557/JMR.1994.0001
[116] Bitterlich H, Löser W, Lindenkreuz H G, et al. Superconducting YNi2B2C- and YPd2B2C-phase formation from undercooled melts [J]. J. Alloys Compd., 2001, 325: 285
doi: 10.1016/S0925-8388(01)01391-3
[117] Feng J C, Wang H Q, Zhang B G, et al. Research status and prospect of space welding technology [J]. Trans. China Weld. Inst., 2015, 36(6): 107
[117] 冯吉才, 王厚勤, 张秉刚 等. 空间焊接技术研究现状及展望 [J]. 焊接学报, 2015, 36(6): 107
[118] Zhang Y Y, Zhang W, Wang G. Discussion on the technical demands and application modes of additive manufacturing in space [J]. Mater. China, 2017, 36: 503
[118] 张颖一, 张 伟, 王 功. 太空增材制造的技术需求和应用模式探索 [J]. 中国材料进展, 2017, 36: 503
[119] Zocca A, Lüchtenborg J, Mühler T, et al. Enabling the 3D printing of metal components in µ-gravity [J]. Adv. Mater. Technol., 2019, 4: 1900506
doi: 10.1002/admt.v4.10
[120] Kovalchuk D, Melnyk V, Melnyk I. A coaxial wire-feed additive manufacturing of metal components using a profile electron beam in space application [J]. J. Mater. Eng. Perform., 2022, 31: 6069
doi: 10.1007/s11665-022-06994-z
[121] Li B B, Wang B W, Zhu G, et al. Low-roughness-surface additive manufacturing of metal-wire feeding with small power [J]. Materials, 2021, 14: 4265
doi: 10.3390/ma14154265
[122] Gradl P, Mireles O R, Katsarelis C, et al. Advancement of extreme environment additively manufactured alloys for next generation space propulsion applications [J]. Acta Astronaut., 2023, 211: 483
doi: 10.1016/j.actaastro.2023.06.035
[123] Hoffmann M, Ye J H, Elwany A. Selective deposition and fusion of AISI 316L: An additive manufacturing process for space environments via direct ink writing and laser processing [J]. J. Manuf. Sci. Eng., 2024, 146: 121006
doi: 10.1115/1.4067144
[124] Roberts C, McGill P, Foreman L, et al. Material characterization of additively manufactured Ti-6Al-4V parts for an environmental control and life support system in space flight hardware [J]. Mater. Perform. Charact., 2020, 9: 714
[125] Mohammed S M A K, Li Z H, Orikasa K, et al. Neutron radiation induced transmutation of boron to lithium in aluminum-boron nitride composite [J]. Mater. Today Adv., 2025, 25: 100551
[126] Meng S K, Zhu R S, Zheng H L, et al. Property evolution and service life prediction of novel metallic materials for future lunar bases [J]. Rare Met., 2024, 43: 5318
doi: 10.1007/s12598-024-02810-w
[127] Jiang X, Xue D Z, Bai Y, et al. AI4Materials: Transforming the landscape of materials science and enigneering [J]. Rev. Mater. Res., 2025, 1: 100010
[1] 王叶青, 付珂, 赵永柱, 苏礼季, 陈正. Fe7(CoNiMn)80B13 共晶高熵合金的深过冷非平衡凝固行为及微观组织演变[J]. 金属学报, 2025, 61(1): 143-153.
[2] 卢健麟, 任化永, 谢桉, 王建潼, 何峰. Ni43.5Co19Cr10Fe10Al15Ti2Mo0.5 共晶高熵合金快速凝固行为及组织调控[J]. 金属学报, 2025, 61(1): 191-202.
[3] 梁琛, 王小娟, 王海鹏. 快速凝固Ti-Al-Nb合金B2相形成机制与显微力学性能[J]. 金属学报, 2022, 58(9): 1169-1178.
[4] 李金富, 周尧和. 液态金属深过冷快速凝固过程中初生固相的重熔[J]. 金属学报, 2018, 54(5): 627-636.
[5] 吴国华, 陈玉狮, 丁文江. 高性能镁合金凝固组织控制研究现状与展望[J]. 金属学报, 2018, 54(5): 637-646.
[6] 翟斌, 周凯, 吕鹏, 王海鹏. 自由落体条件下Ti-6Al-4V合金微液滴的快速凝固研究[J]. 金属学报, 2018, 54(5): 824-830.
[7] 朱姜蕾, 王庆, 王海鹏. 深过冷液态金属Cu的热物理性质和原子分布[J]. 金属学报, 2017, 53(8): 1018-1024.
[8] 谷倩倩, 阮莹, 朱海哲, 闫娜. 冷却速率对急冷Fe-Al-Nb三元合金凝固组织形成的影响[J]. 金属学报, 2017, 53(6): 641-647.
[9] 黄火根,徐宏扬,张鹏国,王英敏,柯海波,张培,刘天伟. 具有反常非晶形成能力的U-Cr二元合金[J]. 金属学报, 2017, 53(2): 233-238.
[10] 严军辉,坚增运,朱满,常芳娥,许军锋. 深过冷Al-70%Si合金的凝固特性与微观组织*[J]. 金属学报, 2016, 52(8): 931-937.
[11] 王中原,何杰,杨柏俊,江鸿翔,赵九洲,王同敏,郝红日. Zr-Ce-Co-Cu难混溶合金的液-液相分离和双非晶相形成*[J]. 金属学报, 2016, 52(11): 1379-1387.
[12] 赵雷,江鸿翔,AHMAD Tauseef,赵九洲. Cu-Co-Fe合金雾化合金液滴凝固过程研究*[J]. 金属学报, 2015, 51(7): 883-888.
[13] 陈枫,苏德喜,佟运祥,牛立群,王海波,李莉. Ni43Co7Mn41Sn9高温形状记忆合金薄带的结构和相变[J]. 金属学报, 2013, 49(8): 976-980.
[14] 陈书,赵九洲. 偏晶合金在激光表面处理条件下的凝固行为研究[J]. 金属学报, 2013, 49(5): 537-543.
[15] 李少强,陈志勇,王志宏,刘建荣,王清江,杨锐. 一种快速凝固粉末冶金高温钛合金微观组织特征研究[J]. 金属学报, 2013, 29(4): 464-474.