Please wait a minute...
金属学报  2026, Vol. 62 Issue (5): 803-821    DOI: 10.11900/0412.1961.2025.00299
  综述 本期目录 | 过刊浏览 |
基于机器学习的金属材料多尺度塑性力学研究进展
康国政(), 张旭, 胡冰晖, 双思垚, 于峻石, 熊宇凯, 宋世杰
西南交通大学 力学与航空航天学院 成都 610031
Advances in Machine Learning-Based Multiscale Plasticity Mechanics of Metallic Materials
KANG Guozheng(), ZHANG Xu, HU Binghui, SHUANG Siyao, YU Junshi, XIONG Yukai, SONG Shijie
School of Mechanics and Aerospace, Southwest Jiaotong University, Chengdu 610031, China
引用本文:

康国政, 张旭, 胡冰晖, 双思垚, 于峻石, 熊宇凯, 宋世杰. 基于机器学习的金属材料多尺度塑性力学研究进展[J]. 金属学报, 2026, 62(5): 803-821.
Guozheng KANG, Xu ZHANG, Binghui HU, Siyao SHUANG, Junshi YU, Yukai XIONG, Shijie SONG. Advances in Machine Learning-Based Multiscale Plasticity Mechanics of Metallic Materials[J]. Acta Metall Sin, 2026, 62(5): 803-821.

全文: PDF(2755 KB)   HTML
摘要: 

多尺度塑性力学研究旨在揭示材料塑性变形过程中的力学响应规律,建立微观结构、变形机制与宏观性能之间的物理联系,在材料设计与性能优化中具有重要意义。金属材料的塑性行为往往伴随位错、界面、相变等多种微观结构和变形机制的协同演化,构成高度复杂的时空耦合系统,传统建模方法在构型复杂性、尺度衔接及机理表征等方面面临诸多挑战。近年来,机器学习与多尺度数值模拟和本构模型构建的融合为多尺度塑性力学研究开辟了新路径。本文综述了基于机器学习的多尺度塑性力学研究进展,主要包括塑性变形行为的多尺度模拟和本构模型构建两方面,涵盖基于机器学习的分子动力学势函数构建与模拟、离散位错动力学模拟、晶体塑性有限元及本构模型构建等典型进展。最后,对未来机器学习赋能的多尺度塑性力学研究的发展方向进行了展望。

关键词 : 金属材料,  塑性变形,  机器学习,  多尺度模拟,  本构模型    
Abstract:

Multiscale plasticity mechanics aims to reveal the plastic deformation response of materials across length scales and to establish physical links among the microstructure, deformation mechanisms, and macroscopic properties, providing critical insights for materials design and performance optimization. Plasticity in metallic materials often involves the interplay of multiple microstructures and deformation mechanisms such as dislocations, interfaces, and phase transformations, which together form a highly complex spatiotemporal system. Traditional modeling approaches struggle to handle configurational complexity, bridge different scales, or represent the underlying mechanisms in such systems. Recently, machine learning has been integrated with multiscale simulations and constitutive modeling, opening new avenues in multiscale plasticity research. This review focuses on two primary aspects of machine learning-enabled multiscale plasticity studies: multiscale simulations of plastic deformation and the development of constitutive models. Representative examples include machine learning-based interatomic potential construction, dislocation dynamics simulations, finite element simulations of crystal plasticity, and data-driven constitutive modeling. Finally, the review envisages future directions for multiscale plasticity mechanics empowered by machine learning.

Key words: metallic material    plastic deformation    machine learning    multiscale simulation    constitutive modeling
收稿日期: 2025-09-30     
ZTFLH:  TG14  
基金资助:国家自然科学基金项目(12192214);国家自然科学基金项目(12532004);国家自然科学基金项目(12222209)
通讯作者: 康国政,guozhengkang@swjtu.edu.cn,主要从事材料本构关系和疲劳断裂研究
Corresponding author: KANG Guozheng, professor, Tel: 13678083528, E-mail: guozhengkang@swjtu.edu.cn
作者简介: 康国政,男,1969年生,教授,博士
Machine learning potential

ΔE

meV·atom-1

ΔF

meV·nm-1

Computational efficiency

atom step·ms-1

GAP46110006.1
MTP35630061
DP448000150
NEP4470004600
表1  不同势函数体系的计算效率和训练误差对比[16]
图1  基于机器学习势函数探究纯Ni位错芯结构[27]
图2  基于通用势函数的1亿原子的MoTaVW多晶材料的拉伸行为模拟[29]
图3  基于机器学习方法预测微米尺度晶体材料应力-应变响应[8]
图4  基于机器学习方法确定非局部晶体塑性(CP)本构模型参数:遗传算法流程示意图,有限元模拟结果与实验结果的对比,及特征的取值产生的影响[4]
图5  机器学习框架示意图[57]
图6  基于纳米压痕实验确定材料参数的逆向分析流程图[72]
图7  基于门控单元循环单元(GRU)的、路径依赖的塑性本构模型预测结果[81]
[1] Wu W Y, Song C H, Zhang Z S, et al. Microstructure and properties of as-cast Co-28Cr alloy with aging treatment [J]. Chin. J. Rare Met., 2025, 49: 982
[1] 吴文源, 宋成浩, 张振山 等. 时效处理对铸态Co-28Cr合金组织和性能的影响 [J]. 稀有金属, 2025, 49: 982
[2] Tong J B, Wang X D, Nie J J, et al. Diffusivities and atomic mobilities in the bcc phase of the Ti-Al-Fe system [J]. Foundry Technol., 2024, 45: 672
[2] 佟健博, 王向东, 聂晶晶 等. Ti-Al-Fe体系bcc相扩散系数及原子移动性 [J]. 铸造技术, 2024, 45: 672
[3] Cheng J. Effect of deformation on microstructure and mechanical properties of (CoNiV)97Al3 medium entropy alloy [J]. Nonferrous Met. Mater. Eng., 2024, 45(3): 1
[3] 程 军. 变形量对(CoNiV)97Al3中熵合金组织和力学性能的影响 [J]. 有色金属材料与工程, 2024, 45(3): 1
[4] Zhou R, Xiong Y K, Chu J L, et al. Parameter identification of nonlocal crystal plastic model based on machine learning and genetic algorithm [J]. Chin. J. Theor. Appl. Mech., 2024, 56: 751
[4] 周 瑞, 熊宇凯, 储节磊 等. 基于机器学习和遗传算法的非局部晶体塑性模型参数识别 [J]. 力学学报, 2024, 56: 751
[5] Xie B B, Chen Y, Liu B, et al. Automatic intelligent multiscale simulation to predict mechanical properties and deformation mechanism of complex concentrated alloys [J]. Acta Mater., 2025, 297: 121359
doi: 10.1016/j.actamat.2025.121359
[6] Behler J, Parrinello M. Generalized neural-network representation of high-dimensional potential-energy surfaces [J]. Phys. Rev. Lett., 2007, 98: 146401
doi: 10.1103/PhysRevLett.98.146401
[7] Behler J. Perspective: Machine learning potentials for atomistic simulations [J]. J. Chem. Phys., 2016, 145: 170901
doi: 10.1063/1.4966192
[8] Salmenjoki H, Alava M J, Laurson L. Machine learning plastic deformation of crystals [J]. Nat. Commun., 2018, 9: 5307
doi: 10.1038/s41467-018-07737-2 pmid: 30546114
[9] Hu Y W, Zhang H Y, Cheng J, et al. Machine learning for hot deformation flow stress prediction and dynamic recrystallization in Fe24.75Ni19.8Co9.9Cr14.85Al10.9Mn14.85Si4.95 high-entropy alloy [J]. Intermetallics, 2025, 185: 108914
doi: 10.1016/j.intermet.2025.108914
[10] Daw M S, Baskes M I. Semiempirical, quantum mechanical calculation of hydrogen embrittlement in metals [J]. Phys. Rev. Lett., 1983, 50: 1285
doi: 10.1103/PhysRevLett.50.1285
[11] Baskes M I. Modified embedded-atom potentials for cubic materials and impurities [J]. Phys. Rev., 1992, 46B: 2727
[12] van Duin A C T, Dasgupta S, Lorant F, et al. ReaxFF: A reactive force field for hydrocarbons [J]. J. Phys. Chem., 2001, 105A: 9396
[13] Zuo Y X, Chen C, Li X G, et al. Performance and cost assessment of machine learning interatomic potentials [J]. J. Phys. Chem., 2020, 124A: 731
[14] Bartók A P, Payne M C, Kondor R, et al. Gaussian approximation potentials: The accuracy of quantum mechanics, without the electrons [J]. Phys. Rev. Lett., 2010, 104: 136403
doi: 10.1103/PhysRevLett.104.136403
[15] Novikov I S, Gubaev K, Podryabinkin E V, et al. The MLIP package: Moment tensor potentials with MPI and active learning [J]. Mach. Learn.: Sci. Technol., 2021, 2: 025002
[16] Fan Z Y, Wang Y Z, Ying P H, et al. GPUMD: A package for constructing accurate machine-learned potentials and performing highly efficient atomistic simulations [J]. J. Chem. Phys., 2022, 157: 114801
doi: 10.1063/5.0106617
[17] Rowe P, Deringer V L, Gasparotto P, et al. An accurate and transferable machine learning potential for carbon [J]. J. Chem. Phys., 2020, 153: 034702
[18] Zhao R, Wang S C, Kong Z Z, et al. Development of a neuroevolution machine learning potential of Pd-Cu-Ni-P alloys [J]. Mater. Des., 2023, 231: 112012
doi: 10.1016/j.matdes.2023.112012
[19] Zheng H, Fey L T W, Li X G, et al. Multi-scale investigation of short-range order and dislocation glide in MoNbTi and TaNbTi multi-principal element alloys [J]. npj Comput. Mater., 2023, 9: 89
doi: 10.1038/s41524-023-01046-z
[20] Han J Q, Zhang L F, Car R, et al. Deep potential: A general representation of a many-body potential energy surface [J]. Commun. Comput. Phys., 2018, 23: 629
doi: 10.4208/cicp
[21] Zhang L F, Han J Q, Wang H, et al. Deep potential molecular dynamics: A scalable model with the accuracy of quantum mechanics [J]. Phys. Rev. Lett., 2018, 120: 143001
doi: 10.1103/PhysRevLett.120.143001
[22] Xu K, Bu H K, Pan S N, et al. GPUMD 4.0: A high-performance molecular dynamics package for versatile materials simulations with machine-learned potentials [J]. Mater. Genome Eng. Adv., 2025, 3: e70028
[23] Santos-Florez P A, Dai S C, Yao Y, et al. Short-range order and its impacts on the BCC MoNbTaW multi-principal element alloy by the machine-learning potential [J]. Acta Mater., 2023, 255: 119041
doi: 10.1016/j.actamat.2023.119041
[24] Li X G, Chen C, Zheng H, et al. Complex strengthening mechanisms in the NbMoTaW multi-principal element alloy [J]. npj Comput. Mater., 2020, 6: 70
doi: 10.1038/s41524-020-0339-0
[25] Yin S, Zuo Y X, Abu-Odeh A, et al. Atomistic simulations of dislocation mobility in refractory high-entropy alloys and the effect of chemical short-range order [J]. Nat. Commun., 2021, 12: 4873
doi: 10.1038/s41467-021-25134-0 pmid: 34381027
[26] Meng F S, Shinzato S, Zhang S H, et al. A highly transferable and efficient machine learning interatomic potentials study of α-Fe-C binary system [J]. Acta Mater., 2024, 281: 120408
doi: 10.1016/j.actamat.2024.120408
[27] Gong X G, Li Z Y, Pattamatta A S L S, et al. An accurate and transferable machine learning interatomic potential for nickel [J]. Commun. Mater., 2024, 5: 157
doi: 10.1038/s43246-024-00603-3
[28] Takamoto S, Okanohara D, Li Q J, et al. Towards universal neural network interatomic potential [J]. J. Materiomics, 2023, 9: 447
doi: 10.1016/j.jmat.2022.12.007
[29] Song K K, Zhao R, Liu J H, et al. General-purpose machine-learned potential for 16 elemental metals and their alloys [J]. Nat. Commun., 2024, 15: 10208
doi: 10.1038/s41467-024-54554-x
[30] Bertin N, Sills R B, Cai W. Frontiers in the simulation of dislocations [J]. Annu. Rev. Mater. Res., 2020, 50: 437
doi: 10.1146/matsci.2020.50.issue-1
[31] Steinberger D, Song H X, Sandfeld S. Machine learning-based classification of dislocation microstructures [J]. Front. Mater., 2019, 6: 141
doi: 10.3389/fmats.2019.00141
[32] Zhou Z C, Zhu Y C, Luo J, et al. Characterisation of dislocation patterning behaviour with a continuum dislocation dynamics model on two parallel slip planes equipped with a deep neural network resolving local microstructures [J]. Int. J. Solids Struct., 2020, 198: 57
doi: 10.1016/j.ijsolstr.2020.04.026
[33] Tao J, Wei D A, Yu J S, et al. Micropillar compression using discrete dislocation dynamics and machine learning [J]. Theor. Appl. Mech. Lett., 2024, 14: 100484
doi: 10.1016/j.taml.2023.100484
[34] Hiemer S, Fan H D, Zaiser M. Relating plasticity to dislocation properties by data analysis: Scaling vs. machine learning approaches [J]. Mater. Theory, 2023, 7: 1
doi: 10.1186/s41313-022-00050-y
[35] Salmenjoki H, Laurson L, Alava M J. Probing the transition from dislocation jamming to pinning by machine learning [J]. Mater. Theory, 2020, 4: 5
doi: 10.1186/s41313-020-00022-0
[36] Rafiei M H, Gu Y J, El-Awady J A. Machine learning of dislocation-induced stress fields and interaction forces [J]. JOM, 2020, 72: 4380
doi: 10.1007/s11837-020-04389-w
[37] Bertin N, Zhou F. Accelerating discrete dislocation dynamics simulations with graph neural networks [J]. J. Comput. Phys., 2023, 487: 112180
doi: 10.1016/j.jcp.2023.112180
[38] Khan A S, Lopez-Pamies O, Kazmi R. Thermo-mechanical large deformation response and constitutive modeling of viscoelastic polymers over a wide range of strain rates and temperatures [J]. Int. J. Plast., 2006, 22: 581
doi: 10.1016/j.ijplas.2005.08.001
[39] Wei X L, van der Zwaag S, Jia Z X, et al. On the use of transfer modeling to design new steels with excellent rotating bending fatigue resistance even in the case of very small calibration datasets [J]. Acta Mater., 2022, 235: 118103
doi: 10.1016/j.actamat.2022.118103
[40] Dai W, Wang H M, Guan Q, et al. Studying the micromechanical behaviors of a polycrystalline metal by artificial neural networks [J]. Acta Mater., 2021, 214: 117006
doi: 10.1016/j.actamat.2021.117006
[41] Frydrych K, Tomczak M, Papanikolaou S. Crystal plasticity parameter optimization in cyclically deformed electrodeposited copper—A machine learning approach [J]. Materials, 2024, 17: 3397
doi: 10.3390/ma17143397
[42] Bulgarevich D S, Watanabe M. Stress-strain curve predictions by crystal plasticity simulations and machine learning [J]. Sci. Rep., 2024, 14: 29492
doi: 10.1038/s41598-024-80098-7
[43] Veasna K, Feng Z X, Zhang Q, et al. Machine learning-based multi-objective optimization for efficient identification of crystal plasticity model parameters [J]. Comput. Methods Appl. Mech. Eng., 2023, 403: 115740
doi: 10.1016/j.cma.2022.115740
[44] Bishara D, Li S F. A machine-learning aided multiscale homogenization model for crystal plasticity: Application for face-centered cubic single crystals [J]. Comput. Mech., 2023, 72: 77
doi: 10.1007/s00466-023-02276-0
[45] Miyazawa Y, Briffod F, Shiraiwa T, et al. Prediction of cyclic stress-strain property of steels by crystal plasticity simulations and machine learning [J]. Materials, 2019, 12: 3668
doi: 10.3390/ma12223668
[46] Sharma A S, Ahmad O, Bhowmick S, et al. Machine learning to accelerate full-field crystal plasticity simulations [J]. Procedia Struct. Integr., 2025, 71: 469
doi: 10.1016/j.prostr.2025.08.063
[47] Acar P. Machine learning reinforced crystal plasticity modeling under experimental uncertainty [J]. AIAA J., 2020, 58: 3569
doi: 10.2514/1.J059233
[48] Weber G, Pinz M, Ghosh S. Machine learning-enabled self-consistent parametrically-upscaled crystal plasticity model for Ni-based superalloys [J]. Comput. Methods Appl. Mech. Eng., 2022, 402: 115384
doi: 10.1016/j.cma.2022.115384
[49] Saidi P, Pirgazi H, Sanjari M, et al. Deep learning and crystal plasticity: A preconditioning approach for accurate orientation evolution prediction [J]. Comput. Methods Appl. Mech. Eng., 2022, 389: 114392
doi: 10.1016/j.cma.2021.114392
[50] Ye W Y, Hohl J, Mushongera L T. Prediction of cyclic damage in metallic alloys with crystal plasticity modeling enhanced by machine learning [J]. Materialia, 2022, 22: 101388
doi: 10.1016/j.mtla.2022.101388
[51] Ye W Y, Zhang X, Hohl J, et al. Life prediction for directed energy deposition-manufactured 316L stainless steel using a coupled crystal plasticity-machine learning framework [J]. Adv. Eng. Mater., 2023, 25: 2201429
doi: 10.1002/adem.v25.10
[52] Lee J, Tasdemir B, Das S, et al. Productive automation of calibration processes for crystal plasticity model parameters via reinforcement learning [J]. Mater. Des., 2024, 248: 113470
doi: 10.1016/j.matdes.2024.113470
[53] Lu S J, Zhang X, Hu Y N, et al. Machine learning-based constitutive parameter identification for crystal plasticity models [J]. Mech. Mater., 2025, 203: 105263
doi: 10.1016/j.mechmat.2025.105263
[54] Wang J, Chen J H, Li S X, et al. Prediction of white etching area damage based on machine learning model combined with crystal plasticity under rolling contact fatigue [J]. Int. J. Fatigue, 2025, 198: 108965
doi: 10.1016/j.ijfatigue.2025.108965
[55] Eghtesad A, Luo Q X, Shang S L, et al. Machine learning-enabled identification of micromechanical stress and strain hotspots predicted via dislocation density-based crystal plasticity simulations [J]. Int. J. Plast., 2023, 166: 103646
doi: 10.1016/j.ijplas.2023.103646
[56] Mao Y W, Keshavarz S, Kilic M N T, et al. A deep learning-based crystal plasticity finite element model [J]. Scr. Mater., 2025, 254: 116315
doi: 10.1016/j.scriptamat.2024.116315
[57] Yuan M F, Paradiso S, Meredig B, et al. Machine learning-based reduce order crystal plasticity modeling for ICME applications [J]. Integr. Mater. Manuf. Innov., 2018, 7: 214
doi: 10.1007/s40192-018-0123-x
[58] Nascimento A, Roongta S, Diehl M, et al. A machine learning model to predict yield surfaces from crystal plasticity simulations [J]. Int. J. Plast., 2023, 161: 103507
doi: 10.1016/j.ijplas.2022.103507
[59] Ashby M F. The deformation of plastically non-homogeneous materials [J]. Philos. Mag., 1970, 21: 399
[60] Voyiadjis G Z, Song Y. Strain gradient continuum plasticity theories: Theoretical, numerical and experimental investigations [J]. Int. J. Plast., 2019, 121: 21
doi: 10.1016/j.ijplas.2019.03.002
[61] Huang Y, Qu S, Hwang K C, et al. A conventional theory of mechanism-based strain gradient plasticity [J]. Int. J. Plast., 2004, 20: 753
doi: 10.1016/j.ijplas.2003.08.002
[62] Fleck N A, Hutchinson J W. A phenomenological theory for strain gradient effects in plasticity [J]. J. Mech. Phys. Solids, 1993, 41: 1825
doi: 10.1016/0022-5096(93)90072-N
[63] Gao H, Huang Y, Nix W D, et al. Mechanism-based strain gradient plasticity— I. Theory [J]. J. Mech. Phys. Solids, 1999, 47: 1239
doi: 10.1016/S0022-5096(98)00103-3
[64] Gurtin M E. A gradient theory of single-crystal viscoplasticity that accounts for geometrically necessary dislocations [J]. J. Mech. Phys. Solids, 2002, 50: 5
doi: 10.1016/S0022-5096(01)00104-1
[65] Tan J Y, Maupin K, Shao S, et al. A Bayesian machine learning framework for selection of the strain gradient plasticity multiscale model [A]. ASME 2021 International Mechanical Engineering Congress and Exposition. Volume 12: Mechanics of Solids, Structures, and Fluids; Micro- and Nano-Systems Engineering and Packaging [C]. ASME, 2021: Virtual, Online, V012T12A009.
[66] Gurtin M E, Reddy B D. Gradient single-crystal plasticity within a Mises-Hill framework based on a new formulation of self- and latent-hardening [J]. J. Mech. Phys. Solids, 2014, 68: 134
doi: 10.1016/j.jmps.2014.01.002
[67] Dao M, Chollacoop N, Van Vliet K J, et al. Computational modeling of the forward and reverse problems in instrumented sharp indentation [J]. Acta Mater., 2001, 49: 3899
doi: 10.1016/S1359-6454(01)00295-6
[68] Lee J, Lee C, Kim B. Reverse analysis of nano-indentation using different representative strains and residual indentation profiles [J]. Mater. Des., 2009, 30: 3395
doi: 10.1016/j.matdes.2009.03.030
[69] Kang J J, Becker A A, Sun W. Determining elastic-plastic properties from indentation data obtained from finite element simulations and experimental results [J]. Int. J. Mech. Sci., 2012, 62: 34
doi: 10.1016/j.ijmecsci.2012.05.011
[70] Chen H, Cai L X. Theoretical model for predicting uniaxial stress-strain relation by dual conical indentation based on equivalent energy principle [J]. Acta Mater., 2016, 121: 181
doi: 10.1016/j.actamat.2016.09.008
[71] Long X, Lu C H, Shen Z Y, et al. Identification of mechanical properties of thin-film elastoplastic materials by machine learning [J]. Acta Mech. Solida Sin., 2023, 36: 13
doi: 10.1007/s10338-022-00340-5
[72] Zhu D X, Zhao J F, Hu Y N, et al. Predicting tensile behavior from nanoindentation using gradient plasticity model with neural network and genetic algorithm [J]. Mech. Mater., 2025, 207: 105368
doi: 10.1016/j.mechmat.2025.105368
[73] Rajendran S. A technique to develop mesh-distortion immune finite elements [J]. Comput. Methods Appl. Mech. Eng., 2010, 199: 1044
doi: 10.1016/j.cma.2009.11.017
[74] Reddy J N. On locking-free shear deformable beam finite elements [J]. Comput. Methods Appl. Mech. Eng., 1997, 149: 113
doi: 10.1016/S0045-7825(97)00075-3
[75] Tyagi A, Suman U, Mamajiwala M, et al. Physics informed deep learning for strain gradient continuum plasticity [J]. 2024, arXiv: 2408. 06657
[76] Anand L, Gurtin M E, Lele S P, et al. A one-dimensional theory of strain-gradient plasticity: Formulation, analysis, numerical results [J]. J. Mech. Phys. Solids, 2005, 53: 1789
doi: 10.1016/j.jmps.2005.03.003
[77] Ghaboussi J, Garrett J H, Wu X. Knowledge‐based modeling of material behavior with neural networks [J]. J. Eng. Mech., 1991, 117: 132
[78] Liu Q B, Ji Z, Liu M B, et al. Acquiring the constitutive relationship for a thermal viscoplastic material using an artificial neural network [J]. J. Mater. Process. Technol., 1996, 62: 206
doi: 10.1016/0924-0136(95)02229-5
[79] Al-Haik M S, Hussaini M Y, Garmestani H. Prediction of nonlinear viscoelastic behavior of polymeric composites using an artificial neural network [J]. Int. J. Plast., 2006, 22: 1367
doi: 10.1016/j.ijplas.2005.09.002
[80] Ghaboussi J, Sidarta D E. New nested adaptive neural networks (NANN) for constitutive modeling [J]. Comput. Geotech., 1998, 22: 29
doi: 10.1016/S0266-352X(97)00034-7
[81] Mozaffar M, Bostanabad R, Chen W, et al. Deep learning predicts path-dependent plasticity [J]. Proc. Natl. Acad. Sci. USA, 2019, 116: 26414
doi: 10.1073/pnas.1911815116
[82] Gorji M B, Mozaffar M, Heidenreich J N, et al. On the potential of recurrent neural networks for modeling path dependent plasticity [J]. J. Mech. Phys. Solids, 2020, 143: 103972
doi: 10.1016/j.jmps.2020.103972
[83] Versino D, Tonda A, Bronkhorst C A. Data driven modeling of plastic deformation [J]. Comput. Methods Appl. Mech. Eng., 2017, 318: 981
doi: 10.1016/j.cma.2017.02.016
[84] Kabliman E, Kolody A H, Kronsteiner J, et al. Application of symbolic regression for constitutive modeling of plastic deformation [J]. Appl. Eng. Sci., 2021, 6: 100052
[85] Masi F, Stefanou I, Vannucci P, et al. Thermodynamics-based Artificial Neural Networks for constitutive modeling [J]. J. Mech. Phys. Solids, 2021, 147: 104277
doi: 10.1016/j.jmps.2020.104277
[86] Deng X W, Hu Y N, Hu B H, et al. Machine learning based prediction models for uniaxial ratchetting of extruded AZ31 magnesium alloy [J]. Extreme Mech. Lett., 2024, 70: 102193
doi: 10.1016/j.eml.2024.102193
[87] Yu Z, Sun X Y, Xing R S, et al. Unified prediction of uniaxial ratcheting deformation at elevated temperatures with physics-informed multimodal network [J]. Int. J. Plast., 2025, 187: 104275
doi: 10.1016/j.ijplas.2025.104275
[88] Zhu J A, Xue Y H, Liu Z S. A transfer learning enhanced physics-informed neural network for parameter identification in soft materials [J]. Appl. Math. Mech., 2024, 45: 1685
doi: 10.1007/s10483-024-3178-9
[89] Su M M, Yu Y, Chen T H, et al. A thermodynamics-informed neural network for elastoplastic constitutive modeling of granular materials [J]. Comput. Methods Appl. Mech. Eng., 2024, 430: 117246
doi: 10.1016/j.cma.2024.117246
[90] Liu D P, Yang H, Elkhodary K I, et al. Mechanistically informed data-driven modeling of cyclic plasticity via artificial neural networks [J]. Comput. Methods Appl. Mech. Eng., 2022, 393: 114766
doi: 10.1016/j.cma.2022.114766
[91] Guo Z F, Bai R X, Lei Z K, et al. CPINet: Parameter identification of path-dependent constitutive model with automatic denoising based on CNN-LSTM [J]. Eur. J. Mech., 2021, 90A: 104327
[92] Du R, Song H X, Gao F H, et al. Machine learning informed visco-plastic model for the cyclic relaxation of 316H stainless steel at 550 °C [J]. Int. J. Plast., 2023, 170: 103743
doi: 10.1016/j.ijplas.2023.103743
[93] Messner M C, Rhee M, Arsenlis A, et al. A crystal plasticity model for slip in hexagonal close packed metals based on discrete dislocation simulations [J]. Modell. Simul. Mater. Sci. Eng., 2017, 25: 044001
[1] 朱思瑛, 易敏, 郭万林. 金属材料晶界结构的拓扑性质与表征[J]. 金属学报, 2026, 62(5): 705-720.
[2] 陈星秋, 王建韬, 刘培涛. 矩张量机器学习势模型的发展与应用[J]. 金属学报, 2026, 62(5): 785-802.
[3] 吴欣强, 谭季波, 张兹瑜, 薛宝权, 柯伟. 金属材料在高温高压水、液态Pb-Bi和海洋环境中的腐蚀疲劳行为研究进展[J]. 金属学报, 2026, 62(5): 822-834.
[4] 张哲峰, 侯嘉鹏, 刘睿, 李孝滔, 张振军, 张鹏. 金属材料强度-塑性及强度-电导率定量关系[J]. 金属学报, 2026, 62(2): 253-262.
[5] 马成勇, 侯旭儒, 赵琳, 阚成玲, 曹洋, 彭云, 田志凌. 电弧增材制造高强度Al-Mg-Sc系合金研究进展:冶金缺陷、微观组织和力学性能[J]. 金属学报, 2026, 62(1): 29-46.
[6] 马恩, 刘畅. 如何使合金兼具高强度与高塑性[J]. 金属学报, 2025, 61(5): 665-673.
[7] 罗来马, 魏国庆, 刘祯, 朱晓勇, 吴玉程. 钨材料中缺陷的形成及演化规律[J]. 金属学报, 2025, 61(4): 526-540.
[8] 曾小勤, 于铭迪, 王静雅. 镁合金的多系滑移与塑性调控[J]. 金属学报, 2025, 61(3): 361-371.
[9] 郑潇禹, 陈辛, 何美玲, 黄奇, 李亚, 孔毅, 杜勇. 基于晶体塑性的6XXX铝合金力学性能多尺度计算[J]. 金属学报, 2025, 61(11): 1758-1768.
[10] 王方圆, 张玉龙, 王章维, 熊志平, 王辉, 宋旼, 夏文真. 纳米压痕下VCoNi 中熵合金的塑性变形行为[J]. 金属学报, 2025, 61(10): 1567-1578.
[11] 王延绪, 龚武, 苏玉华, 李昺. 中子表征技术在金属结构材料研究中的应用[J]. 金属学报, 2024, 60(8): 1001-1016.
[12] 汪丽佳, 胡励, 苗天虎, 周涛, 何曲波, 刘相果. 预变形对双峰分离非基面织构AZ31镁合金板材室温力学行为及微观组织演变的影响[J]. 金属学报, 2024, 60(7): 881-889.
[13] 杨瑞泽, 翟汝宗, 任少飞, 孙明月, 徐斌, 乔岩欣, 杨兰兰. 1Cr22Mn16N高氮奥氏体不锈钢塑性变形连接中界面组织演化及愈合机制[J]. 金属学报, 2024, 60(7): 915-925.
[14] 刘壮壮, 丁明路, 谢建新. 金属3D打印数字化制造研究进展[J]. 金属学报, 2024, 60(5): 569-584.
[15] 陈克新, 张龙. 2023年度金属材料学科国家自然科学基金管理工作综述[J]. 金属学报, 2024, 60(4): 417-424.