金属学报  2012, Vol. 48 Issue (1): 23-32    DOI: 10.3724/SP.J.1037.2011.00464

论文 本期目录 | 过刊浏览 |

薄板坯连铸结晶器非稳态湍流大涡模拟研究

李宝宽1), 刘中秋1), 齐凤升1), 王芳1), 徐国栋2)

1) 东北大学材料与冶金学院, 沈阳 110819 2) 宝山钢铁股份有限公司, 上海 201900

LARGE EDDY SIMULATION FOR UNSTEADY TURBULENT FLOW IN THIN SLAB CONTINUOUS CASTING MOLD

LI Baokuan1), LIU Zhongqiu1), QI Fengsheng1), WANG Fang1), XU Guodong2)

1) Department of Materials and Metallurgy, Northeastern University, Shenyang 110819 2) Baoshan Iron and Steel Limited Company, Shanghai 201900

李宝宽 刘中秋 齐凤升 王芳 徐国栋. 薄板坯连铸结晶器非稳态湍流大涡模拟研究[J]. 金属学报, 2012, 48(1): 23-32.
, , , , . LARGE EDDY SIMULATION FOR UNSTEADY TURBULENT FLOW IN THIN SLAB CONTINUOUS CASTING MOLD[J]. Acta Metall Sin, 2012, 48(1): 23-32.

摘要 参考文献 相关文章 Metrics 全文: PDF(5594 KB)   摘要: 本文利用大涡模拟模型分析薄板坯连铸钢液非稳态湍流特性, 其中非稳态湍流流动N--S方程采用盒式函数进行滤波处理, 亚格子模型采用Smagorinsky-Lilly模型. 将大涡模拟结果与粒子图像测速及超声探伤结果进行分析比较来校正模型. 通过对薄板坯连铸过程进行数值分析, 获得了结晶器内非稳态钢液湍流的流动特征, 包括流场的漩涡分布及大涡拟序结构的形成、发展、脱落和破碎过程, 并发现即使水口和结晶器在几何上完全对中, 结晶器内湍流分布也不对称, 偏流产生是必然的, 同时导致弯月面较强的波动. 随着非稳态时间的延长, 结晶器内钢液偏流在两侧呈现周期性变化, 周期约为40 s. 关键词 ： 连铸结晶器,  非稳态,  大涡模拟,  漩涡     Abstract：Unsteady turbulent flow in the thin slab continuous casting mold has been computed using the large eddy simulations (LES). The cassette filter function is used to deal with unsteady Navier-Stokes equation, and the Smagorinsky-Lilly sub-grid scale model is used to calculate the dissipative effort of the unresolved small eddies. And this LES model has been validated with the measurements of the particle image velocimetry (PIV) and the ultrasonic flaw detection. The computational domain includes the entire submerged entry nozzle (SEN) starting from the tundish exit and the extended mold region. The results show the characteristics of the unsteady turbulent flow in the thin slab continuous casting processes, such as the vortices distribution and the formation, development, shedding and fracture process of the large eddy coherent structures. The simulation also shows that the turbulent flow is asymmetric even if the nozzle and mold is perfect symmetric in geometry. The flow deviation of the molten steel in the mold is inevitable existence. And the interactions of flows in two sides of nozzle also can cause intensity velocity fluctuation near the meniscus. With the development of the unsteady turbulent flow, the flow deviation of the molten steel in the thin continuous casting strand presented periodic change, and the period is about 40 s. Key words： continuous casting mold    unsteady    large eddy simulation    vortex 收稿日期: 2011-07-19      基金资助: 国家自然科学基金资助项目50934008 作者简介: 李宝宽, 男, 1963年生, 教授 服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 李宝宽 刘中秋 齐凤升 王芳 徐国栋 44.8K 链接本文: https://www.ams.org.cn/CN/10.3724/SP.J.1037.2011.00464      或      https://www.ams.org.cn/CN/Y2012/V48/I1/23 [1] Ho Y, Chen C, Wang WH. ISIJ Int, 1994; 24: 255 [2] Bai H, Thomas B G. Metall Mater Trans, 2001; 32B: 253 [3] Miki Y J, Thomas B G. Metall Mater Trans, 1999; 30B: 639 [4] Hershey D E, Thomas B G, Najjar F M. Int J Numer Methods Fluids, 1993; 17: 23 [5] Bai H, Thomas B G. Metall Mater Trans, 2001; 32B: 269 [6] Aboutalebi M R, Hasan M, Guthrie R I L. Metall Mater Trans, 1995; 26B: 731 [7] Lan X K, Khodadadi J M, Shen F. Metall Mater Trans, 1997; 28B: 321 [8] Bastiaansa Rob J M, Rindta C C M, Nieuwstadtb F T M, Steenhovena A A. Int J Heat Mass Transfer, 2000; 43: 375 [9] Moser R D, Kim J, Mansour N N. Phys Fluids, 1999; 4: 943 [10] Lesieur M, Metais O. Annu Rev Fluid Mech, 1996; 28: 45 [11] Thomas B G, Yuan Q, Sivaramakrishnan S, Shi T, Vanka S P, Assar M B. ISIJ Int, 2001; 41: 1262 [12] Thomas B G, Huang X, Sussman R C. Metall Mater Trans, 1994; 25B: 527 [13] Yuan Q, Sivaramakrishnan S, Vanka S P, Thomas B G. Metall Mater Trans, 2004; 35B: 967 [14] Yuan Q, Thomas B G, Vanka S P. Metall Mater Trans, 2004; 35B: 685 [15] Li B K, Li D H. Acta Metall Sin, 2002; 38: 315 (李宝宽, 李东辉. 金属学报, 2002; 38: 315) [16] Li B K, Tsukihashi F. ISIJ Int, 2001; 41: 844 [17] Li B K, Okane T, Umeda T. Metall Mater Trans, 2000; 31B: 1491 [18] Li B K, Okane T, Umeda T. Metall Mater Trans, 2001; 32B: 1053 [19] Qian Z D, Wu Y L. Acta Metall Sin, 2004; 40: 88 (钱忠东, 吴玉林. 金属学报, 2004; 40: 88) [20] Tang X L, Qian Z D, Wu Y L. J Tsinghua Univ (Sci Technol), 2003; 6: 802 (唐学林, 钱忠东, 吴玉林. 清华大学学报(自然科学版), 2003; 6: 802) [21] Real C, Miranda R, Vilchis C, Barron M, Hoyos L, Gonzalez J. ISIJ Int, 2006; 46: 1183 [22] Herring J R. Front Fluid Mech, 1984; 14: 68 [23] Germano M. J Fluid Mech, 1992; 238: 325 [24] Smagorinsky J. Mon Weather Rev, 1963; 91: 99 [25] Lilly D K. Mon Weather Rev, 1965; 93: 11 [26] Van Driest E R. J Spacecr Rockets, 2003; 40: 1012 [27] Li X S, Xu J Z, Gu C W. Sci China Ser G, 2009; 1: 83 (李雪松, 徐建中, 顾春伟. 中国科学G辑, 2009; 1: 83) [28] Zhang L, Thomas B G. ISIJ Int, 2003; 43: 271 [29] Yuan Q, Thomas B G, Vanka S P. Metall Mater Trans, 2004; 35B: 703 [30] Shi X G. Turbulence. Tianjin: Tianjin University Press, 1994: 190 (是勋刚. 湍流. 天津: 天津大学出版社, 1994: 190) [1] 刘中秋, 李宝宽, 肖丽俊, 干勇. 连铸结晶器内高温熔体多相流模型化研究进展[J]. 金属学报, 2022, 58(10): 1236-1252. [2] 王强, 王连钰, 李宏侠, 蒋佳伟, 朱晓伟, 郭占成, 赫冀成. 钢包出钢末期漩涡抑制机理探究及防漩设计[J]. 金属学报, 2018, 54(7): 959-968. [3] 刘畅, 李树森, 张立峰. RH精炼过程中气液两相流动及混匀现象的模拟研究[J]. 金属学报, 2018, 54(2): 347-356. [4] 刘中秋,李宝宽,姜茂发,张立,徐国栋. 连铸结晶器内氩气/钢液两相非稳态湍流特性的大涡模拟研究[J]. 金属学报, 2013, 49(5): 513-522. [5] 陈芝会 王恩刚 张兴武 王元华 朱明伟 赫冀成. 行波磁场下吹Ar过程中结晶器内气泡行为的研究[J]. 金属学报, 2012, 48(8): 951-956. [6] 姚军 Michael Fairweather 李宁. 粒状腐蚀产物在管道中的沉积机理[J]. 金属学报, 2011, 47(7): 804-808. [7] 许秀杰 邓安元 王恩刚 张林涛 张兴武 张永杰 赫冀成. 电磁软接触连铸圆坯表面振痕演变机理[J]. 金属学报, 2009, 45(4): 464-469. [8] 孟祥宁 朱苗勇. 高拉速板坯连铸结晶器液态渣消耗机理分析[J]. 金属学报, 2009, 45(4): 485-489. [9] 孟祥宁; 朱苗勇 . 高拉速板坯连铸结晶器液体摩擦机理分析[J]. 金属学报, 2008, 44(10): 1193-1197 . [10] 孟祥宁; 朱苗勇; 程乃良 . 高拉速下连铸坯振痕形成机理及振动参数优化[J]. 金属学报, 2007, 43(8): 839-846 . [11] 孟祥宁; 朱苗勇; 刘旭东; 程乃良; 江中块 . 高拉速连铸结晶器非正弦振动因子研究[J]. 金属学报, 2007, 43(2): 205-210 . [12] 郭亮亮; 姚曼; 尹合壁; 王旭东; 方大成; 刘晓 ; 于艳 . 连铸圆坯结晶器的热流计算与讨论[J]. 金属学报, 2006, 42(9): 983-988 . [13] 张胜军; 朱苗勇; 张永亮; 郑淑国; 程乃良; 宋景欣 . 高拉速吹氩板坯连铸结晶器内的卷渣机理研究[J]. 金属学报, 2006, 42(10): 1087-1090 . [14] 孙国岭; 李贺军; 齐乐华; 王兆伟; 胡志彪; 陈强 . C/C复合材料热梯度CVI工艺致密化过程的非稳态温度场分析[J]. 金属学报, 2006, 42(10): 1046-1050 . [15] 尹合壁; 姚曼 . 圆坯连铸结晶器传热的反算法[J]. 金属学报, 2005, 41(6): 638-644 . Viewed Full text Abstract Cited   Shared      Discussed