TRIBOLOGICAL PROPERTIES OF PLASMA SPRAYED FeS COMPOSITE COATINGS MIXED WITH NANO-SiC

Acta Metall Sin

2008, Vol. 44

Issue (4): 463-466 DOI:

Research Articles

Current Issue | Archive | Adv Search

TRIBOLOGICAL PROPERTIES OF PLASMA SPRAYED FeS COMPOSITE COATINGS MIXED WITH NANO-SiC

Ye Pan;;;

东南大学材料科学与工程系

Cite this article:

Ye Pan. TRIBOLOGICAL PROPERTIES OF PLASMA SPRAYED FeS COMPOSITE COATINGS MIXED WITH NANO-SiC. Acta Metall Sin, 2008, 44(4): 463-466 .

Download:

PDF(535KB)
Export: BibTeX | EndNote (RIS)

Abstract FeS/SiC composite coatings have been successfully produced by plasma spray technique. SiC particles with nano-scale are uniformly distributed in FeS matrix. There is a good bond between the coatings and 40Cr steel substrate. The tribological properties of FeS coating and FeS/SiC composite coatings have been investigated. The results show that FeS/SiC composite coatings have good antifriction and wear resistance properties. The friction coefficients of the composite coatings, mixed with nano SiC particles in weight fraction 0.2 and 0.3, are almost same as that of FeS coating under dry sliding, but the wear volume of them is remarkably decreased over the range of an order of magnitude. In oil lubrication, the friction coefficient of FeS/SiC composite coatings is smaller than that of FeS coating. So the composite coatings have superior antifriction property in the case.

Key words: FeS/SiC coating tribological property plasma spray nano-structured

Received: 20 March 2007

ZTFLH:	TG156.8
	TG174.442

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	Ye Pan

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y2008/V44/I4/463

[1]Rapoport L,Leshinsky V,Lapsker I,Volovik Y,Nepom- nyashcky O,Lvovsky M,Popovitz-Biro R,Feldman Y, Tenne R.Wear,2003;255:785
[2]Wang H D,Zhuang D M,Wang K L,Liu J J,Fang X D, Li Y L.Aeta Metall Sin,2003;39:1031 (王海斗，庄大明，王昆林，刘家浚，方晓东，李永良．金属学报，2003；39：1031)
[3]Chen Y X,Feng Z Z,Liu W M.Tribology,2002;22(2):85 (陈云霞，冯治中，刘维民．摩擦学学报，2002；22(2)：85)
[4]Lee I,Park I.Surf Coat Technol,2006;200:3540
[5]Chen Y X,Wang B,Liu W M.J Process Eng,2002;2: 365 (陈云霞，王博，刘维民．过程工程学报，2002；2：365)
[6]Cosemans P,Zhu X,Gelis J P,Stappen M V.Surf Coat Technol,2003;174-175:416
[7]Goller R,Torri P,Baker M A,Gilmore R,Gissler W.Surf Coat Technol,1999;120-121:453
[8]Wang C M.Master Dissertation,Southeast University, Nanjing,2005 (王春明．东南大学硕士学位论文，南京，2005)
[9]Xu T,Zhao J Z,Xu K.Tribol Trans,1997;40;178N

[1]	REN Yuan, DONG Xinyuan, SUN Hao, LUO Xiaotao. Oxide Cleaning Effect of In-Flight CuNi Droplet During Atmospheric Plasma Spraying by B Addition[J]. 金属学报, 2022, 58(2): 206-214.
[2]	WANG Wenquan, DU Ming, ZHANG Xinge, GENG Mingzhang. Microstructure and Tribological Properties of WC-Ni Matrix Cermet Coatings Prepared by Electrospark Deposition on H13 Steel Substrate[J]. 金属学报, 2021, 57(8): 1048-1056.
[3]	LI Xiaoqian, WANG Fuguo, LIANG Aimin. Effect of Spraying Process on Microstructure and Tribological Properties of Ta₂O₅ In Situ Composite Nanocrystalline Ta-Based Coatings[J]. 金属学报, 2021, 57(2): 237-246.
[4]	WAN Xiangliang, HU Feng, CHENG Lin, HUANG Gang, ZHANG Guohong, WU Kaiming. Influence of Two-Step Bainite Transformation on Toughness in Medium-Carbon Micro/Nano-Structured Steel[J]. 金属学报, 2019, 55(12): 1503-1511.
[5]	Mingming MA,Feng LIAN,Luping ZANG,Qiukuan XIANG,Huichen ZHANG. Effect of Dimple Depth on Friction Properties of Aluminum Alloy Under Different Lubrication Conditions[J]. 金属学报, 2017, 53(4): 406-414.
[6]	Baiyang LOU,Yuxing WANG. EFFECTS OF Mo CONTENT ON THE MICRO-STRUCTURE AND TRIBOLOGICAL PROPERTIES OF CrMoAlN FILMS[J]. 金属学报, 2016, 52(6): 727-733.
[7]	GONG Wenbiao, LI Renwei, LI Yupeng,SUN Daqian, WANG Wenquan. STABILIZATION AND CORROSION RESISTANCE UNDER HIGH-TEMPERATURE OF NANOSTRUCTURED CeO₂/ZrO₂-Y₂O₃ THERMAL BARRIER COATING[J]. 金属学报, 2013, 49(5): 593-598.
[8]	FU Chong, WANG Junbo, YANG Minge, HOU Jinli, DING Bingjun. MICROSTRUCTURE AND ELECTRICAL PROPERTIES OF Ag/(Sn_0.8La_0.2)O₂ COATING PREPARED BY PLASMA SPRAYING[J]. 金属学报, 2013, 49(3): 325-329.
[9]	SHI Huiying LONG Yanni JIANG Bailing CHEN Dichun. EFFECT OF SUBLAYER ON THE STRUCTURES AND TRIBOLOGICAL PROPERTIES OF GLC COATING ON Al–BASED ALLOY[J]. 金属学报, 2012, 48(8): 983-988.
[10]	XIANG Jianying CHEN Shuhai HUANG Jihua ZHAO Xingke ZHANG Hua. THERMAL SHOCK RESISTANCE OF La₂(Zr_0.7Ce_0.3)₂O₇THERMAL BARRIER COATING PREPARED BY ATMOSPHERIC PLASMA SPRAYING[J]. 金属学报, 2012, 48(8): 965-970.
[11]	LIU Jing SHENG Hongfei ZHANG Baoshan PENG Liangming. PROPERTIES OF Ti₃XC₂(X=Al, Si) WITH PLASMA SPRAYED ZrO₂ THERMAL BARRIER COATING[J]. 金属学报, 2011, 47(9): 1141-1146.
[12]	YANG Yiyong PENG Zhijian FU Zhiqiang WU Sudong CHEN Xinchun WANG Chengbiao. STUDY ON W GRADED DOPING DLC COMPOSITE FILMS WITH MULTICOMPONENT TRANSITION LAYER[J]. 金属学报, 2010, 46(1): 34-40.
[13]	XU Na ZHANG Jia HOU Wanliang QUAN Mingxiu LI Rongde CHANG Xinchun. INFLUENCE OF HEAT TREATMENT ON MICROSTRUCTURES AND ADHESIVE STRENGTH OF HIGH TEMPERATURE SOLID SELF–LUBRICANT COATING[J]. 金属学报, 2009, 45(8): 943-948.
[14]	. MICROSTRUCTURE AND PROPERTIES OF Al2O3 CERAMIC COATING BY PLASMA SPRAYING AND LASER REMELTING ON MAGNESIUM ALLOY[J]. 金属学报, 2007, 43(5): 493-497 .
[15]	Ye Pan. TRIBOLOGICAL PROPERTIES OF COMBUSTION SYNTHESISED Cr-Al(Cr)2O3 CERMETS[J]. 金属学报, 2006, 42(5): 492-496 .

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed