DEWETTING OF SnAgCu LEAD-FREE SOLDER LIQUID ON NON-WETTING LINE

Acta Metall Sin

2006, Vol. 42

Issue (12): 1298-1302 DOI:

Research Articles

Current Issue | Archive | Adv Search

DEWETTING OF SnAgCu LEAD-FREE SOLDER LIQUID ON NON-WETTING LINE

中国科学院金属研究所;沈阳材料科学国家（联合）实验室

Cite this article:

. DEWETTING OF SnAgCu LEAD-FREE SOLDER LIQUID ON NON-WETTING LINE. Acta Metall Sin, 2006, 42(12): 1298-1302 .

Download:

PDF(1099KB)
Export: BibTeX | EndNote (RIS)

Abstract Specific non-wetting lines with a definite width of 200 μm were prepared on copper substrates. The dewetting of SnAgCu lead-free liquids on the non-wetting line were observed and recorded in-situ during the reflow of the samples. It was found that the shapes of the solder liquids varied with the height of the printed solder paste. As the height decreasing from 950 μm, the separation length of the liquid along the non-wetting line was elongated gradually. For the solder paste with a height of 350 μm, the liquid sphere cap was completely separated by the non-wetting line. The dependence of the critical height of the solder liquid on the width of non-wetting line was proposed based on interfacial energy minimization. The experimental data was comparable. These results gave a clear hint on the origin of solder bridge.

Key words: lead-free solder solder bridge wetting dewetting

Received: 28 March 2006

ZTFLH:

TG113

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y2006/V42/I12/1298

[1] Lenz P, Lipowsky R. Phys Rev Lett, 1998; 80: 1920
[2] Lipowsky R, Lenz P, Swain P S. Colloids Surf, 2000; 161A: 3
[3] Gau H, Herminghaus S, Lenz P, Lipowsky R. Science, 1999; 283: 46
[4] Li M Y, Ban H S, Kim Y P, Wang C Q, Zhang L. J Electron Pack, 2004; 126: 23
[5] Li M Y, Wang C Q, Zhang L. Prog Nat Sci, 2001; 11: 221
[6] Reiter G. Phys Rev Lett, 1992; 68: 75
[7] Herminghaus S, Jacobs K, Mecke K, Bischof J, Fery A, Ibn-Elhaj M, Schlagowski S. Science, 1998; 282: 916
[8] Thiele U, Mertig M, Pompe W. Phys Rev Lett, 1998; 80: 2869
[9] Brusch L, Kiihne H, Thiele U, Bar M. Phys Rev, 2002; 66E: 011602
[10] Slavchov R, Radoev B, Stockelhuber K W. Colloids Surf, 2005; 261A: 135
[11] Seemann R, Herminghaus S, Jacobs K. Phys Rev Lett, 2001; 86: 553i

[1]	GUO Fu, DU Yihui, JI Xiaoliang, WANG Yishu. Recent Progress on Thermo-Mechanical Reliability of Sn-Based Alloys and Composite Solder for Microelectronic Interconnection[J]. 金属学报, 2023, 59(6): 744-756.
[2]	SUN Jia, LI Xuexiong, ZHANG Jinhu, WANG Gang, YANG Mei, WANG Hao, XU Dongsheng. Phase Field Modeling of Formation Mechanism of Grain Boundary Allotriomorph in β→α Phase Transformation in Ti-6Al-4V Alloy[J]. 金属学报, 2020, 56(8): 1113-1122.
[3]	Feng QIU, Haotian TONG, Ping SHEN, Xiaoshuang CONG, Yi WANG, Qichuan JIANG. Overview: SiC/Al Interface Reaction and Interface Structure Evolution Mechanism[J]. 金属学报, 2019, 55(1): 87-100.
[4]	Shubo LI, Wenbo DU, Xudong WANG, Ke LIU, Zhaohui WANG. Effect of Zr Addition on the Grain Refinement Mechanism of Mg-Gd-Er Alloys[J]. 金属学报, 2018, 54(6): 911-917.
[5]	Geliang LIU, Bingyang MA, Hailong SHANG, Fan CHEN, Rongbin LI, Geyang LI. Wettability Improvement and Brazing of Si₃N₄by Sputtered Al[J]. 金属学报, 2017, 53(12): 1645-1650.
[6]	LI Xunping ZHOU Minbo XIA Jianmin MA Xiao ZHANG Xinping. EFFECT OF THE CROSS-INTERACTION ON THE FORMATION AND EVOLUTION OF INTERMETALLIC COMPOUNDS IN Cu(Ni)/Sn-Ag-Cu/Cu(Ni) BGA STRUCTURE SOLDER JOINTS[J]. 金属学报, 2011, 47(5): 611-619.
[7]	ZHOU Minbo LI Xunping MA Xiao ZHANG Xinping. EARLY INTERFACIAL REACTION AND UNDERCOOLING SOLIDIFICATION BEHAVIOR OF Sn-3.5Ag/Cu SYSTEM[J]. 金属学报, 2010, 46(5): 569-574.
[8]	TIAN Yanhong YANG Shihua WANG Chunqing WANG Xuelin LIN Pengrong. VOLUME EFFECT OF SHEAR FRACTURE BEHAVIOR OF Sn3.0Ag0.5Cu/Cu LEAD-FREE SOLDER JOINTS[J]. 金属学报, 2010, 46(3): 366-371.
[9]	Zhao Ning. THE LIQUID STRUCTURE OF SN-CU LEAD-FREE SOLDERS[J]. 金属学报, 2008, 44(4): 467-472 .
[10]	. THE WETTING BEHAVIOR AND INTERFACIAL CHARACTERISTICS OF In-Sn ALLOY ON AMORPHOUS AND CRYSTALLINE Cu46Zr45Al7Gd2 SUBSTRATES[J]. 金属学报, 2006, 42(2): 201-204 .
[11]	Tang Xingyong. Effects of Aging on Structures and Shear Strength of Interface of Sn-Ag-Cu Solder/Ni--P Plating Layer[J]. 金属学报, 2006, 42(2): 205-210 .
[12]	ZHUANG Yanxin; XIAN Aiping; WANG Yikang; ZHANG Hiumu; HU Zhuangqi(Institute of Metal Research; Chinese Academy of Sciences; Shenyang 110015)(Manuscript received 1995-11-03; in revised form 1996-04-15). WETTING AND JOINING OF Sn-BASED ACTIVE SOLDERS ON SIALON CERAMIC IN ROUGH VACUUM[J]. 金属学报, 1996, 32(7): 735-741.
[13]	ZHANG Oiyun;HAN Wanshu;LIU Junkang Peking University; Beijing ZHANG Qiyun; professor; Department of Chemistry; Peking University 100871. INTERACTION BETWEEN Cu AND LIQUID Sn——Also on Physical Meaning of Wetting Curve[J]. 金属学报, 1989, 25(6): 85-90.
[14]	AI Suhua;WANG Zhongguang Institute of Metal Research; Academia Sinica; Shenyang. EFFECT OF ENVIRONMENTS ON FATIGUE BEHAVIOUR OF A DUAL-PHASE STEEL[J]. 金属学报, 1988, 24(3): 193-199.
[15]	JIANG Wenbiao Department of Matericls Science and Engineering;Nanjing Institute of Technology;Nanjing;LIU Youpeng;SHU Guangji Nanjing Institute of Technology. WETTING OF GRAPHITE BY LIQUID ALUMINIUM[J]. 金属学报, 1988, 24(2): 214-217.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed