Please wait a minute...
Acta Metall Sin  2004, Vol. 40 Issue (5): 471-476     DOI:
Research Articles Current Issue | Archive | Adv Search |
Modification Performance of the Al-P Master Alloy for Eutectic and Hypereutectic Al-Si Alloys
LIU Xiangfa; QIAO Jinguo; LIU Yuxian; LI Shitong; BIAN Xiufang
Key Laboratory of Liquid Structure and Heredity of Materials;Ministry of Education; Shandong University; Jinan 250061
Cite this article: 

LIU Xiangfa; QIAO Jinguo; LIU Yuxian; LI Shitong; BIAN Xiufang. Modification Performance of the Al-P Master Alloy for Eutectic and Hypereutectic Al-Si Alloys. Acta Metall Sin, 2004, 40(5): 471-476 .

Download:  PDF(16904KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  A new type of Al-2.5%P master alloy has been developed, which can be used to modify eutectic and hypereutectic Al-Si alloys. The modifying performance, the P distribution inside Si phases and modification mechanisms were investigated. It has been found that the Al-P master alloy can remarkably refine primary Si grains in hypereutectic Al-Si alloy and its σb,20 ℃ and δb,20 ℃ can increase by 19.0% and 125% respectively; σb,20 ℃ and σb,300 ℃of modified eutectic Al-Si alloy can increase by 11.1% and 18.9% respectively as result of the appearance of fine primary Si grains and shorter eutectic Si crystals. AlP particles are easily found in the center of some primary Si phases in treated hypereutectic Al-Si alloy, while AlP and dissociative P are observed in Si phase in modified eutectic Al--Si alloy. It is considered that there are two modification mechanisms for eutectic Al-Si alloy, one is heterogeneous nucleation and refining of primary Si phase by AlP particles, and the other is P atoms modify the morphologies of Si phases. The modification for the hypereutectic Al-Si alloy mainly depends on heterogeneous nucleation mechanism induced by AlP particles.
Key words:  Al-P master alloy      Al-Si alloy      modification      
Received:  13 February 2003     

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2004/V40/I5/471

[1] Shen B L, Lü X D, Tang J. Spec Cast Nonferrous Alloys, 1996; (3) : 42(沈保罗,吕旭东,唐俊.特种铸造及有色合金,1996;(3) :42)
[2] Heshmatpour B. In: Huglen R, ed. Light Metals 1997, Orlando. Florida, The Minerals Metals and Society, 1997: 801
[3] Schneider W. In: CO Meeting Staff ed., Light Metals 1993, Denver, Colorado, The Minerals. Metals and Materials Society, 1993:815
[4] Zhen Z S, Zhao A M, Mao W M, Yao S F, Zhong X Y, Feng L J, Feng S Q. Mater Sci Technol, 2001; 9:162(甄子胜,赵爱民,毛卫民,姚书芳,钟雪友,冯立军,封素芹.材料科学与工艺,2001;9:162)
[5] Bian X F, Wang W M. Mater Lett, 2000, 44:54
[6] Mao W M, Li S S, Zhao A M, Cui C L, Zhong X Y. Mater Sci Technol, 2001; 9:117(毛卫民,李树索,赵爱民,崔成林,钟雪友.材料科学与工艺,2001:9:117)
[7] Wei P Y, Fu H Z, Reif W. Chin J Nonferrous Met, 1996; 6(1) : 98(魏朋义,傅恒志,Reif W.中国有色金属学报,1996;6(1) :98)
[8] Lin X F, Qiao J G, Song X G, Bian X F, Zhu L M, Zhang Y L. Spec Cast Nonferrous Alloys, 2002; (6) : 43(刘相法,乔进国,宋西贵,边秀房,朱利民,张屹林.特种铸造及有色合金,2002;(6) :43)Z
[1] LIU Lujun, LIU Zheng, LIU Renhui, LIU Yong. Grain Boundary Structure and Coercivity Enhancement of Nd90Al10 Alloy Modified NdFeB Permanent Magnets by GBD Process[J]. 金属学报, 2023, 59(11): 1457-1465.
[2] ZHANG Lili, JI Zongwei, ZHAO Jiuzhou, HE Jie, JIANG Hongxiang. Key Factors Influencing Eutectic Si Modification in Al-Si Hypoeutectic Alloy by Trace La[J]. 金属学报, 2023, 59(11): 1541-1546.
[3] GAO Han, LIU Li, ZHOU Xiaoyu, ZHOU Xinyi, CAI Wenjun, ZHOU Hongling. Preparation and Bioactivity of Micro-Nano Structure on Ti6Al4V Surface[J]. 金属学报, 2023, 59(11): 1466-1474.
[4] CUI Zhenduo, ZHU Jiamin, JIANG Hui, WU Shuilin, ZHU Shengli. Research Progress of the Surface Modification of Titanium and Titanium Alloys for Biomedical Application[J]. 金属学报, 2022, 58(7): 837-856.
[5] YANG Lipo, ZHANG Hailong, ZHANG Yongshun. Present Analysis and Trend Prediction of Shape/ Performance Collaborative Control for High-End Cold Rolling Foils[J]. 金属学报, 2021, 57(3): 295-308.
[6] ZHENG Qiuju, YE Zhongfei, JIANG Hongxiang, LU Ming, ZHANG Lili, ZHAO Jiuzhou. Effect of Micro-Alloying Element La on Solidification Microstructure and Mechanical Properties of Hypoeutectic Al-Si Alloys[J]. 金属学报, 2021, 57(1): 103-110.
[7] Guangdong WANG, Ni TIAN, Changshu HE, Gang ZHAO, Liang ZUO. Formation of Second-Phases in a Direct-Chill Casting Al-12Si-0.65Mg-xMn Alloy[J]. 金属学报, 2018, 54(7): 1059-1067.
[8] Di ZHANG, Mengying YUAN, Zhanqiu TAN, Ding-Bang XIONG, Zhiqiang LI. Progress in Interface Modification and Nanoscale Study of Diamond/Cu Composites[J]. 金属学报, 2018, 54(11): 1586-1596.
[9] Ning LI,Rong ZHANG,Limin ZHANG,Hui XING,Pengfei YIN,Yaoyan WU. Study on Grain Refinement Mechanism of Hypoeutectic Al-7%Si Alloy Under Low Voltage Alternating Current Pulse[J]. 金属学报, 2017, 53(2): 192-200.
[10] Erlin ZHANG, Xiaoyan WANG, Yong HAN. Research Status of Biomedical Porous Ti and Its Alloy in China[J]. 金属学报, 2017, 53(12): 1555-1567.
[11] Xiao LIN, Jun GE, Shuilin WU, Baohua LIU, Huilin YANG, Lei YANG. Advances in Metallic Biomaterials with both Osteogenic and Anti-Infection Properties[J]. 金属学报, 2017, 53(10): 1284-1302.
[12] Zhentao YU, Sen YU, Jun CHENG, Xiqun MA. Development and Application of Novel Biomedical Titanium Alloy Materials[J]. 金属学报, 2017, 53(10): 1238-1264.
[13] LUO Xinmin, WANG Xiang, CHEN Kangmin, LU Jinzhong, WANG Lan, ZHANG Yongkang. SURFACE LAYER HIGH-ENTROPY STRUCTURE AND ANTI-CORROSION PERFORMANCE OF AERO-ALUMINUM ALLOY INDUCED BY LASER SHOCK PROCESSING[J]. 金属学报, 2015, 51(1): 57-66.
[14] WEN Qiang, JIAN Zengyun, ZHU Man, CHANG Fang'e, DANG Bo. EFFECTS OF RE ON THE SOLIDIFICAIION CHARACTERISTICS OF Al-80%Si ALLOY[J]. 金属学报, 2014, 50(5): 610-618.
[15] LUO Xinmin, CHEN Kangmin, ZHANG Jingwen, LU Jinzhong,REN Xudong,LUO Kaiyu, ZHANG Yongkang. DISLOCATION MECHANISM OF SURFACE MODIFICATION FOR COMMERCIAL PURITY ALUMINUM  AND ALUMINUM ALLOY BY LASER SHOCK PROCESSING[J]. 金属学报, 2013, 49(6): 667-674.
No Suggested Reading articles found!