Please wait a minute...
Acta Metall Sin  2010, Vol. 46 Issue (4): 500-505    DOI: 10.3724/SP.J.1037.2009.00706
论文 Current Issue | Archive | Adv Search |
EFFECT OF AN ABRUPT GROWTH RATE ON PRIMARY Al2Cu PHASE IN DIRECTIONAL SOLIDIFICATION OF Al–40%Cu HYPEREUTECTIC ALLOY
QUAN Qiongrui; LI Shuangming; FU Hengzhi
State Key Laboratory of Solidification Processing; Northwestern Polytechnical University; Xi’an 710072
Cite this article: 

QUAN Qiongrui LI Shuangming FU Hengzhi. EFFECT OF AN ABRUPT GROWTH RATE ON PRIMARY Al2Cu PHASE IN DIRECTIONAL SOLIDIFICATION OF Al–40%Cu HYPEREUTECTIC ALLOY. Acta Metall Sin, 2010, 46(4): 500-505.

Download:  PDF(1270KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

Intermetallics combining metal and ceramic properties exhibit colorfully complicated growth morphologies in solidification. Different from the solidus phase solidification, intermetallic solidification remains less understanding of the correlation between processing parameters and microstructure morphologies. In this paper, considering that the intermetallic compound Al2Cu phase has well–known thermophysical properties available for the theoretical and experimental research, we carried out the directional solidification experiments and focused on an Al–Al2Cu hypereutectic alloy, where the Al2Cu phase was solidified as a primary phase. The primary Al2Cu phase growth behavior in the experiments included phase competition growth between coupled eutectic and primary phase, faceted phase transition and its change in growth morphology. By using a high thermal gradient directional solidification apparatus, the directionally solidified microstructures of Al–40%Cu (mass fraction) hyereutectic alloy were investigated and discussed based on the competition growth model. As the growth rate was changed abruptly from 10 μm/s to 2 μm/s, the microstructure transition from a primary Al2Cu dendrite plus interdendritic eutectic to an entirely coupled eutectic occurred due to the interface growth temperature of the coupled eutectic exceeding that of the primary Al2Cu dendrite. Also, the alloy liquid composition ahead of the solid/liquid interface approaching the eutectic point caused this microstructure transition. Simultaneously, in the changing–growth rate experiments, the primary Al2Cu dendrites were firstly broken into small ones and then became the eutectic microstructure; it was interpreted rather by the decrease in liquid solute concentration ahead of the solid/liquid interface tan by te effect of the thermal–solutal convection. Moreover, the morphology change iphase growth from faceted primary Al2Cu phase to non–faceted phase was observed by reducing abruptly the growtrate from 10 μm/s to 2 μm/s, which can be explained by the Jackson fctor α decreasing with increasig the interface growth temperature of primary Al2Cu pase.

Key words:  directional solidification      abrupt growth rate      primary Al2Cu phase      faceted phase      eutectic microstructure     
Received:  26 October 2009     
Fund: 

Supported by National Natural Science Foundation of China (No.50971101), Program for New Century Execllent Talents in University (No.NCET–07–0692) and the Fund of the State Key Laboratory of Solidification Processing in NWPU (No.34–TP–2009)

URL: 

https://www.ams.org.cn/EN/10.3724/SP.J.1037.2009.00706     OR     https://www.ams.org.cn/EN/Y2010/V46/I4/500

[1] Moshksar M M, Mirzaee M. Intermetallics, 2004; 12: 1361
[2] Johnson D R, Inui H, Muto S, Omiya Y, Yamanaka T. Acta Mater, 2006; 54: 1077
[3] Li X Z, Fan J L, Guo J J, Su Y Q, Fu H Z. Acta Metall Sin, 2009; 45: 308
(李新中, 樊江磊, 郭景杰, 苏彦庆, 傅恒志. 金属学报, 2009; 45: 308)
[4] Zhong H, Li S M, Lu H Y, Zou G R, Liu L, Fu H Z. J Cryst Growth, 2008; 310: 3366
[5] Ozawa S, Satio T, Motegi T. J Alloys Compd, 2004; 363: 263
[6] Cheng C J, Zhu S G, Li J G, Li Y H. Mater Sci Eng, 2005; B122: 174
[7] Tiller W A. The Science of Crystallization: Microscopic Interface Phenomena, Cambridge: Cambridge University Press, 1991: 52
[8] Fu H Z, Guo J J, Liu L, Li J S. Directional Solidification and Processing of Advanced Materials, Beijing: Science Press, 2008: 17
(傅恒志, 郭景杰, 刘林, 李金山. 先进材料定向凝固, 北京: 科学出版社, 2008: 17)
[9] Walker H, Liu S, Lee J H, Trivedi R. Metall Mater Trans, 2007; 38A: 1417
[10] Gill S C, Kurz W. Acta Metall Mater, 1995; 43: 139
[11] Ourdjini A, Liu J C, Elliott R. Mater Sci Technol, 1994; 10: 312
[12] Yilmaz F, Elliott R. J Cryst Growth, 1984; 66: 465
[13] LEE J H, Liu S, Miyahara H, Trivedi R. Metall Mater Trans, 2004; 35B: 910
[14] LEE J H, Liu S, Trivedi R. Metall Mater Trans, 2005; 36A: 3111
[15] Ting L, Li S M, Fu H Z. Rare Met Mater Eng, 2007; 36: 617
(唐玲, 李双明, 傅恒志. 稀有金属材料与工程, 2007; 36: 617)
[16] Zhong H, Li S M, Lv H Y, Liu L, Zhou G R, Fu H Z. Sci China, 2007; 50G: 432
[17] Kurz W, Fisher D J. Fundamentals of Solidification, 4th ed. Zurich: Trans Tech Publications Ltd, 1998: 35
[18] Tiller W A. The Science of Crystallization: Macroscopic Phenomena and Defect Generation. Cambridge: Cambridge University Press, 1992: 144
[19] Umeda T, Okane T, Kurz W. Acta Mater, 1996; 44: 4209
[20] Burden M H, Hunt J D. J Cryst Growth, 1974; 22: 109
[21] Magnin P, Trivedi R. Acta Mater, 1991; 4: 453
[22] Li S M, Ma B L, Li X L, Liu L, Fu H Z. Sci China, 2005; 48E: 270
[23] Jackson K A, Hunt J D. Trans Metall Soc AIME, 1966; 236: 1129
[24] Karma A, Srkissian A. Metall Mater Trans, 1996; 27A: 635
[25] Stefanescu D M. Science and Engineering of Casting Solidification, 2nd ed. Berlin: Springer, 2009: 176

[1] MA Dexin, ZHAO Yunxing, XU Weitai, WANG Fu. Effect of Gravity on Directionally Solidified Structure of Superalloys[J]. 金属学报, 2023, 59(9): 1279-1290.
[2] ZHANG Jian, WANG Li, XIE Guang, WANG Dong, SHEN Jian, LU Yuzhang, HUANG Yaqi, LI Yawei. Recent Progress in Research and Development of Nickel-Based Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1109-1124.
[3] SU Zhenqi, ZHANG Congjiang, YUAN Xiaotan, HU Xingjin, LU Keke, REN Weili, DING Biao, ZHENG Tianxiang, SHEN Zhe, ZHONG Yunbo, WANG Hui, WANG Qiuliang. Formation and Evolution of Stray Grains on Remelted Interface in the Seed Crystal During the Directional Solidification of Single-Crystal Superalloys Assisted by Vertical Static Magnetic Field[J]. 金属学报, 2023, 59(12): 1568-1580.
[4] LI Yanqiang, ZHAO Jiuzhou, JIANG Hongxiang, HE Jie. Microstructure Formation in Directionally Solidified Pb-Al Alloy[J]. 金属学报, 2022, 58(8): 1072-1082.
[5] CHEN Ruirun, CHEN Dezhi, WANG Qi, WANG Shu, ZHOU Zhecheng, DING Hongsheng, FU Hengzhi. Research Progress on Nb-Si Base Ultrahigh Temperature Alloys and Directional Solidification Technology[J]. 金属学报, 2021, 57(9): 1141-1154.
[6] ZHANG Xiaoli, FENG Li, YANG Yanhong, ZHOU Yizhou, LIU Guiqun. Influence of Secondary Orientation on Competitive Grain Growth of Nickel-Based Superalloys[J]. 金属学报, 2020, 56(7): 969-978.
[7] ZHANG Jian,WANG Li,WANG Dong,XIE Guang,LU Yuzhang,SHEN Jian,LOU Langhong. Recent Progress in Research and Development of Nickel-Based Single Crystal Superalloys[J]. 金属学报, 2019, 55(9): 1077-1094.
[8] XU Qingyan,YANG Cong,YAN Xuewei,LIU Baicheng. Development of Numerical Simulation in Nickel-Based Superalloy Turbine Blade Directional Solidification[J]. 金属学报, 2019, 55(9): 1175-1184.
[9] Hui FANG,Hua XUE,Qianyu TANG,Qingyu ZHANG,Shiyan PAN,Mingfang ZHU. Dendrite Coarsening and Secondary Arm Migration in the Mushy Zone During Directional Solidification:[J]. 金属学报, 2019, 55(5): 664-672.
[10] Yan YANG, Guangyu YANG, Shifeng LUO, Lei XIAO, Wanqi JIE. Microstructures and Growth Orientation of Directionally Solidification Mg-14.61Gd Alloy[J]. 金属学报, 2019, 55(2): 202-212.
[11] JIN Hao, JIA Qing, LIU Ronghua, XIAN Quangang, CUI Yuyou, XU Dongsheng, YANG Rui. Seed Preparation and Orientation Control of PST Crystals of Ti-47Al Alloy[J]. 金属学报, 2019, 55(12): 1519-1526.
[12] Guohua WU, Yushi CHEN, Wenjiang DING. Current Research and Future Prospect on Microstructures Controlling of High Performance Magnesium Alloys During Solidification[J]. 金属学报, 2018, 54(5): 637-646.
[13] Jincheng WANG, Chunwen GUO, Junjie LI, Zhijun WANG. Recent Progresses in Competitive Grain Growth During Directional Solidification[J]. 金属学报, 2018, 54(5): 657-668.
[14] Guang CHEN, Gong ZHENG, Zhixiang QI, Jinpeng ZHANG, Pei LI, Jialin CHENG, Zhongwu ZHANG. Research Progress on Controlled Solidificationand Its Applications[J]. 金属学报, 2018, 54(5): 669-681.
[15] Lin LIU, Dejian SUN, Taiwen HUANG, Yanbin ZHANG, Yafeng LI, Jun ZHANG, Hengzhi FU. Directional Solidification Under High Thermal Gradient and Its Application in Superalloys Processing[J]. 金属学报, 2018, 54(5): 615-626.
No Suggested Reading articles found!