Acta Metall Sin  1992, Vol. 28 Issue (5): 32-39    DOI:

Current Issue | Archive | Adv Search |

EFFECT OF NON-EQUILIBRIUM SEGREGATION OF P ON ORIENTATION VARIATION IN COLD ROLLED Fe-P ALLOY

ZHANG Lixin;NInG Hua;ZHOU Jing;LI Liguang Laboratory of Corrosion Science; Institute of Corrosion and Protection of Metals; Academia Sinica; Shenyang Institute of Metal Research; Academia Sinica; Shenyang Correspondent professor; Institute of corrosion and protection of Metals; Academia Sinica; Shenyang 110015).

ZHANG Lixin;NInG Hua;ZHOU Jing;LI Liguang Laboratory of Corrosion Science; Institute of Corrosion and Protection of Metals; Academia Sinica; Shenyang Institute of Metal Research; Academia Sinica; Shenyang Correspondent professor; Institute of corrosion and protection of Metals; Academia Sinica; Shenyang 110015).. EFFECT OF NON-EQUILIBRIUM SEGREGATION OF P ON ORIENTATION VARIATION IN COLD ROLLED Fe-P ALLOY. Acta Metall Sin, 1992, 28(5): 32-39.

Abstract References Related Articles Recommended Metrics Download:  PDF(1174KB)  Export:  BibTeX | EndNote (RIS)       Abstract  Using 3-dimensional orientation distribution function, study was made of theeffect of non-equilibrium segregation of P on the orientation variation in cold rolled Fe-P al-loy during annealing under analytical electron microscope. P is found to segregatepreferrentially on the {110} slip plane. The non-equilibriously sgregated P forms a structurewith repeat cycle a=1.582 nm over 450℃. The fiber texture may vary in decrease of <001>// ND and increase of <001>// ND, and transfer from {111} <110> to {111} <143> withtemperature raising during alloy recovery. After recrystallization, direction {111} <143>changes into {111} <112>. A proposed model about the formation of recrystallization tex-ture was fairly explained by structure of P non-equilibrium segregation. Key words:  P non-equilibrium segregation structure      lattice image      recovery      Received:  18 May 1992      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1992/V28/I5/32 1 Grabke H J. Steel Res, 1986; 57: 178 2 Hu H. Metal Trans, 1977; 8A: 1567 3 张立新,曲哲,李黎光,魏文译.金属学报,1988;24:A336 4 宁华,张立新.金属学报,1990;26:A346 5 李正修,刘星浦,徐心和.控制与决策,1986;(3) :16 6 张立新,李黎光,魏文铎.见:师昌绪主编,汽车薄板及成形技术,中国薄钢板成形技术研究会,1990:300 7 梁志德,徐家桢,王福.织构材料的三维取向分析技术.沈阳:东北工学院出版社,1986:108| [1] YI Xiaoou, HAN Wentuo, LIU Pingping, FERRONI Francesco, ZHAN Qian, WAN Farong. Defect Production, Evolution, and Thermal Recovery Mechanisms in Radiation Damaged Tungsten[J]. 金属学报, 2021, 57(3): 257-271. [2] Junqin SHI,Kun SUN,Liang FANG,Shaofeng XU. Stress Relaxation and Elastic Recovery of Monocrystalline Cu Under Water Environment[J]. 金属学报, 2019, 55(8): 1034-1040. [3] ZHANG Fei, SHEN Jian, YAN Xiaodong, SUN Jianlin, JIANG Na, ZHOU Hua. DYNAMIC SOFTENING MECHANISM OF 2099 ALLOY DURING HOT DEFORMATION PROCESS[J]. 金属学报, 2014, 50(6): 691-699. [4] TIAN Yuxing LI Shujun HAO Yulin YANG Rui. HIGH TEMPERATURE DEFORMATION BEHAVIOR AND MICROSTRUCTURE EVOLUTION MECHANISM TRANSFORMATION IN Ti2448 ALLOY[J]. 金属学报, 2012, 48(7): 837-844. [5] NIE Wenjin SHANG Chengjia WU Shengjie SHI Peijian CHENG Junjie ZHANG Xiaobing. EFFECTS OF Nb ON RECOVERY OF HOT-DEFORMED AUSTENITE[J]. 金属学报, 2012, 48(7): 775-781. [6] YANG Chenggong, SHAN Jiguo, REN Jialie. STUDY ON SHAPE RECOVERY TEMPERATURE OF TiNi ALLOY LASER WELD JOINT[J]. 金属学报, 2012, 48(5): 513-518. [7] GAO Guhui ZHANG Han BAI Bingzhe. EFFECT OF TEMPERING TEMPERATURE ON LOW TEMPERATURE IMPACT TOUGHNESS OF A LOW CARBON Mn-SERIES BAINITIC STEEL[J]. 金属学报, 2011, 47(5): 513-519. [8] SHEN Kun WANG Mingpu GUO Mingxing LI Shumei . STUDY ON HIGH TEMPERATURE DEFORMATION CHARACTERISTICS OF Cu–0.23%Al2O3 DISPERSION–STRENGTHENED COPPER ALLOY[J]. 金属学报, 2009, 45(5): 597-604. [9] WANG Weiguo; ZHOU Bangxin; FENG Liu; ZHANG Xin; XIA Shuang. Grain Boundary Character Distributions (GBCD) of Cold-Rolled Pb--Ca--Sn--Al Alloy[J]. 金属学报, 2006, 42(7): 715-721 . [10] LIU Xiaopeng; JIN Wei; CAO Mingzhou; YANG Rui. EFFECT OF CONSTRAINT TRANSFORMATION ON RECOVERY STRAIN OF Ti44Ni47Nb9 ALLOY[J]. 金属学报, 2004, 40(4): 363-366 . [11] LIU Xiaopeng; JIN Wei; CAO Mingzhou; YANG Rui. Study on Constraint Transformation Behavior of Tini Alloy[J]. 金属学报, 2004, 40(2): 130-134 . [12] SUN Jian; FU Yunyi; SHI Rong; SUN Xiaoguang; HU Gengxiang (The Public Laboratory of State Education Commission for High Temperature Materials & High Temperature Tests; Shanghai Jiaotong University; Shanghai 200030). THE HIGH TEMPERATURE TENSILE BEHAVIORS OF Al_(67)Ti_(25)Mn_8 INTERMETALLICS UNDER DIFFERENT STRAIN RATES[J]. 金属学报, 1998, 34(5): 526-530. [13] WANG Baoyi; ZHANG Shuihe; WANG Tianmin (Lanzhou University;Lanzhou 730000). RECOVERY BEHAVIOUR OF QUENCHED-IN DEFECTS IN Fe-Cr-Ni ALLOY BY POSITRON ANNIHILATION[J]. 金属学报, 1997, 33(3): 271-276. [14] ZHANG Baofa;SHEN Wanci;LIU Yingjie; WANG Yuanfei;TANG Xiangyun (Tsinghua University;Beijing 100084). ADIABATIC SHEAR BAND IN WHITE-ETCHING LAYER[J]. 金属学报, 1997, 33(11): 1161-1164. [15] HAN Jingtao (University of Science and Technology Beijing; Beijing 100083);ZHAO Gang (The 1202 Factory of PLA; Beijing 100036); CAO Qixiang(Tsinghua University; Beijing 100084) (Manuscript received 1995-11-10; in revised form 1996-02-14). DISCOVERY OF INNER CRACK RECOVERY AND ITS STRUCTURE CHANGE IN 20MnMo STEEL[J]. 金属学报, 1996, 32(7): 723-729. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed