Acta Metall Sin  1995, Vol. 31 Issue (18): 269-274    DOI:

Current Issue | Archive | Adv Search |

INFLUENCE OF GAS INJECTION ON FLUID FLOW IN MOULD

ZHANG Jiongming(Anshan Iron and Steel Research Institute; Anshan 114001);HE Jicheng; LI Baokuan(Northeastern University; Shenyang 110006)

ZHANG Jiongming(Anshan Iron and Steel Research Institute; Anshan 114001);HE Jicheng; LI Baokuan(Northeastern University; Shenyang 110006). INFLUENCE OF GAS INJECTION ON FLUID FLOW IN MOULD. Acta Metall Sin, 1995, 31(18): 269-274.

Abstract References Related Articles Recommended Metrics Download:  PDF(388KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The mathmatical and physical model has been adopt to compute the fluid flow distribution in case of local gas holdup in mould. The photography was used to show fluid field. The predicated flow patterns show reasonable agreement with exprimental observations using actual water model. Key words:  mould      gas holdup      fluid field      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1995/V31/I18/269 1HuangX,ThomasBG,NajarFM．MetallTrans,1993;24B:3792HuangX,ThomasBG,NajarFM．Metallans,1993;23B:3393ThomasGB．SteelmakingConferenceProceedings,Vol．12,IronandSteelSocietyofUSA,1990:4234JooS,GuthrieRIL．CanMetallQ,1991;30:2615张风禄,蒋智．钢铁,1986;21(8):226沈巧珍,严永梅．钢铁,1990;25(9):227贺友多．传输过程的数值计算方法．北京:冶金工业出版社,19918BesshoN,YodaR,Yamasaki,FujiiT,NozakiT,TakatoriS．Proc6thIntIronandSteelCongress,Vol．3,TheIronandSteelInstituteofJapan,Nagoya,1990:340 [1] Xiaoyan CHEN,Zhe JIN,Xuefeng BAI,Yizhou ZHOU,Tao JIN,Xiaofeng SUN. EFFECT OF C ON THE INTERFACIAL REACTION AND WETTABILITY BETWEEN A Ni-BASED SUPERALLOY AND CERAMIC MOULD[J]. 金属学报, 2015, 51(7): 853-858. [2] MU Danning YANG Changlin WEI Xiaowei LIU Feng. RESEARCH ON GRAIN REFINEMENT IN BULK UNDERCOOLED Fe–Co BASE ALLOYS[J]. 金属学报, 2012, 48(12): 1409-1414. [3] GUO Liangliang; YAO Man; YIN Hebi; WANG Xudong; FANG Dacheng; LIU Xiao; YU Yan. CALCULATION AND DISCUSSION ON THE HEAT FLUX IN MOULD OF CONTINUOUS CASTING ROUND BILLET[J]. 金属学报, 2006, 42(9): 983-988 . [4] . Microstructures and creep properties of Mg-6Al based magnesium alloys with strontium and calcium addition[J]. 金属学报, 2006, 42(12): 1267-1273 . [5] . STUDY ON MECHANISM OF ENTRAPMENT IN SLAB CONTINUOUS CASTING MOULD WITH HIGH CASTING SPEED AND ARGON BLOWING[J]. 金属学报, 2006, 42(10): 1087-1090 . [6] YIN Hebi; YAO Man. Inverse Algorithm of Heat Transfer in Round Billet Continuous Casting Mould[J]. 金属学报, 2005, 41(6): 638-644 . [7] DONG Jie; LIU Xiaotao; ZHAO Zhihao; BAO Weiping; CUI Jianzhong. Effect of Mould Materials on the As-Cast Microstructures of a Super-High Strength Al Alloy Cast by Low Frequency Electromagnetic Casting[J]. 金属学报, 2004, 40(2): 215-219 . [8] HE Youduo Professor;Department of Mepallergy;Baotou Institute of Iron and Speel Technology;Baotou;Nei Monggot;SAHAI Yogeshwar Baotou Institute of Iron and Steel Technology; Baotou; Nei Monggol; The Ohio State University; Columbus OH; USA. FLUID DYNAMICS OF CONTINUOUS CASTING TUNDISHES[J]. 金属学报, 1988, 24(2): 147-154. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed