Please wait a minute...
Acta Metall Sin  2007, Vol. 43 Issue (9): 956-960     DOI:
Research Articles Current Issue | Archive | Adv Search |
EFFECT OF HOMOGENIZATION TREATMENT ON THE MICROSTRUCTURES OF LOW FREQUENCY ELECTROMAGNETIC CASTING 7050 ALUMINUM ALLOY
Zhihao Zhao;;;
东北大学材料电磁过程教育部重点实验室
Cite this article: 

Zhihao Zhao. EFFECT OF HOMOGENIZATION TREATMENT ON THE MICROSTRUCTURES OF LOW FREQUENCY ELECTROMAGNETIC CASTING 7050 ALUMINUM ALLOY. Acta Metall Sin, 2007, 43(9): 956-960 .

Download:  PDF(398KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  The 7050 aluminum alloy ingot with fine microstructure was cast by low frequency electromagnetic casting (LFEC) process. The homogenization treatment behaviors of LFEC ingot were investigated experimentally. The results show that the ingots cast with low frequency electromagnetic field has a better homogenization effect than conventional DC ingot. Under the same homogenization condition, the LFEC ingot has fewer low melting point phase between grains and more solute elements inside grains. After homogenized for 12 hours the LFEC ingots can reach the average percentage of the alloy elements, but the DC ingots haven’t reach it until for 48 hours.
Key words:  7050 aluminum alloy      Low frequency electromagnetic casting      homogenization treatment      microstructures      
Received:  10 January 2007     
ZTFLH:  TF777,TG113.12  

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2007/V43/I9/956

[1]Birat J P,Chone J.lronmaking Steelmaking,1983;110: 269
[2]Vires C,Ricou R.Metall Trans,1985;16B:377
[3]Meyer J L,Szekely J,Elkaddah N,Vires C,Ricou R.Met- all Trans,1987;18B:529
[4]Beitelman L.Can Metall Q,1999;38:301
[5]Spitzer K H,Reiter G,Schwerdtfeger K.ISIJ Int,1996; 36:487
[6]Vives C.Metall Trans,1989;20B:623
[7]Vives C.Metall Trans,1989;20B:631
[8]Dong J,Cui J Z.Metall Mater Trans,2004;35A:2487
[9]Zhang B J,Cui J Z,Lu G M,Zhang Q,Ban C Y.Acta Metall Sin,2002;38:215 (张北江,崔建忠,路贵民,张勤,班春燕.金属学报,2002;38:215)
[10]Zhang B J,Cui J Z.Mater Sci Eng,2003;A355:325
[11]Zhao Z H,Wang J,Zuo Y B,Cui J Z.Acta Metall Sin, 2007;43:949 (赵志浩,王静,左玉波,崔建忠.金属学报,2007;43:949)
[12]Chandan M,Mukhopadhyay A K.Mater Sci Eng,2005; A391:367
[13]Robson J D.Mater Sci Eng,2004;A382:112
[14]Desnain P,Fautrelle Y,Meyer J L,Riquet J P,Durand F. Acta Metall Mater,1988;38:1513
[15]Stefanescu D M,Padhya G,Yopdhyay D B.Metall Trans, 1990;21A:998
[16]Zhang B J,Cui J Z,Lu G M.Mater Lett,2003;57:1707
[17]Liu X T,Dong J,Cui J Z.Trans Nonferrous Met Soc Chin,2003;13:909 (刘晓涛,董杰,崔建忠.中国有色金属学报,2003;13:909)
[1] CHEN Dandan ZHANG Haitao WANG Xiangjie CUI Jianzhong. INVESTIGATION ON MICROSEGREGATION OF Al-4.5%Cu ALLOY PRODUCED BY LOW FREQUENCY ELECTROMAGNETIC CASTING[J]. 金属学报, 2011, 47(2): 185-190.
[2] WANG Dong MA Zongyi. INVESTIGATION OF POST-COLD ROLLING AGING PROCESSES ON SOLUTIONIZED 7050 ALUMINUM ALLOY[J]. 金属学报, 2010, 46(5): 581-588.
[3] Zhihao Zhao. STUDY ON MICROSTRUCTURES AND AGING CHARACTERISTICS OF 7050 ALUMINUM ALLOY PLATE EXTRUDED FROM LOW FREQUENCY ELECTROMAGNETIC CASTING INGOT[J]. 金属学报, 2007, 43(9): 949-955 .
[4] . [J]. 金属学报, 2007, 43(10): 1077-1081 .
[5] DONG Jie; LIU Xiaotao; ZHAO Zhihao; BAO Weiping; CUI Jianzhong. Effect of Mould Materials on the As-Cast Microstructures of a Super-High Strength Al Alloy Cast by Low Frequency Electromagnetic Casting[J]. 金属学报, 2004, 40(2): 215-219 .
[6] LI Gang;WANG Zhongguang(State Key Laboratory of Fatigue and Fracture for Materials;Institute of Metal Research; Chinese Academy of Sciences; Shenyang; 110015).GUO Jianting; TAN Minghui;SHI Changxu(Institute of Metal Research; Chinese Academy of Sciences;Shenyang; 110015)(Manuscript received 94-05 -03). ^MECHANICAL PROPERTIES AND MICROSTRUCTURES OF TWO Ni_3Al ALLOYS[J]. 金属学报, 1995, 31(2): 64-68.
[7] NING Xiuzhen;ZHANG Tianxiang;TONG Yingjie;ZHU Yaoxiao Institute of Metal Research; Academia Sinica; Shenyang. HOMOGENIZATION TREATMENT OF ALLOY GH169[J]. 金属学报, 1989, 25(3): 40-44.
No Suggested Reading articles found!