|
|
|
| OPTIMIZATION OF PROCESS PARAMETERS PREPARING HOLLOW FIBROUS NICKEL PLAQUE BY WEB-BASED ANN-GA SYSTEM |
| LI Fan; WANG Xidong; ZHANG Dengjun; ZHANG Mei; GE Xinlei |
| Department of Physical Chemistry; University of Science and Technology Beijing; Beijing 100083; Institute of Process Engineering; The Chinese Academy of Sciences; Beijing 100080 |
|
Cite this article:
LI Fan; WANG Xidong; ZHANG Dengjun; ZHANG Mei; GE Xinlei. OPTIMIZATION OF PROCESS PARAMETERS PREPARING HOLLOW FIBROUS NICKEL PLAQUE BY WEB-BASED ANN-GA SYSTEM. Acta Metall Sin, 2005, 41(12): 1293-1297 .
|
|
|
Abstract Based on the amount of preparation work of hollow fibrous nickel plaque
in laboratory, ANN-GA
programs on computer network which were designed by our group was used
in optimizing the process parameters and looking for the optimized
condition. The optimized condition was that the content of nickel fiber was
97%, sintering temperature 1275 K and holding time 20 min, PVB 5%, PP 3.5%
and Ni(OH)2 1%. Under the optimized condition the satisfactory
plaque with almost 87% porosity has been carried out and every single
factor effect on the plaque porosity during preparing the plaque
was analyzed and predicted with computer. These results coincided with
those obtained by other researchers' experiments.
|
|
Received: 07 April 2005
|
|
|
[1] Dhar S K, Ovshinsky S R, Gifford P R, Corrigan D A. J Power Source, 1997; 65: 1
[2] Ohms D, Kohlhase M, Benczur-Urmossy G, Schadlich G. J Power Source, 2002; 105: 127
[3] Ilic D, Kilb M, Holl K, Praas H W, Pytlik E. J Power Source, 1999; 80: 112
[4] Kim H S, Itoh T, Nishizama M, Mohamedi M, Umeda M, Uchidc I. Int J Hydrogen Energy, 2002; 27: 295
[5] Rade I, Andersson B A. J Power Source, 2001; 93: 55
[6] Zhu W H, Durben P J, Tatarchuk B J. J Power Source, 2002; 111: 221
[7] Zhu W H. PhD Thesis, Institute of Chemical Metallurgy, The Chinese Academy of Sciences, Beijing, 1996 (朱文化．中国科学院化工冶金研究所博士学位论文,北京, 1996)
[8] Zhang D J, Luo S M, Wang Z K. Chin Pat, CN No.ZL1034880, 1989 (张登君,罗世民,王志宽．中国专利, CN No．ZL1034880, 1989)
[9] Li F, Zhang D J, Zhang H, Li B H, Tang Q, Zhang G D. Chin J Power Source, 1999; 23: 87 (李钒,张登君,张慧,李报厚,唐清,张冠东．电源技 术,1999;23:87
[10] Liu G H. PhD Thesis, University of Science and Technology Beijing, 2002 (刘国华．北京科技大学博士学位论文, 2002)
[11] Zhu W H, Zhang D J, Zhang G D, Ke J J. Mater Res Bull, 1995; 30: 1133 |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
