Please wait a minute...
Acta Metall Sin  2005, Vol. 41 Issue (1): 15-    DOI:
Research Articles Current Issue | Archive | Adv Search |
Finite Element Analysis of the Creep Damage IndentationTesting with Flat Indenter
YUE Zhufeng
Department of Engineering Mechanics; Northwestern Polytechnical University; Xian 710072
Cite this article: 

YUE Zhufeng. Finite Element Analysis of the Creep Damage IndentationTesting with Flat Indenter. Acta Metall Sin, 2005, 41(1): 15-.

Download:  PDF(164KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract   The creep indentation testing with cylindrical flat indenters has been simulated by the finite element method with special attention on the creep damage of the indented materials. For the equivalent-stress-controlled-damage materials, the user subroutine Creep has been programmed for Abaqus, which is used to analyze the one-phase half--infinite material and thin-film/substrate material systems. It is found that the creep indentation depth rate is influenced by the damage parameters of the indented materials as well as the size of the indenters and the ratio of the indenter size to thickness of the thin film. It is a possible, like that of the non--damage creep indentation experiments, to obtain the creep damage law of the indented materials from the creep damage indentation testing.
Key words:  creep indentation testing      creep damage      
Received:  13 January 2004     
ZTFLH:  TG111.8  
  TB115  

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2005/V41/I1/15

[1] Evans B. J Geophys Res, 1984; 89: 4213
[2] Li W B, Henshall J L, Hooper R M, Easterling K E. AdaMetall Mater, 1991; 39: 3099
[3] Pandorf R, Broeckmann C, Berns H. MP Materialprufumg, 1999; 41: 294
[4] Li J C M. In: Earthman J C, Mohamed F A eds, Proc 7thInt Conf Creep and Fracture of Eng Mater Struc, War-rendale: The Minerals , Metals & Materials Society, 1997:109
[5] Lucas B N, Oliver W C. Metall Mater Trans, 1999: 30A:601
[6] Dieter G E. Mechanical Metallurgy. New York : McGraw-Hill Book Company, 1988
[7] Yue Z F, Probst-Hein M, Eggeler G. Mater High Temp,2000; 17: 449
[8] Yue Z F, Eggeler G. J Mater Sci Technol, 2000; 16: 559
[9] Yue Z F, Eggeler G, Stoeckhert B. Comp Mater Sci, 2001,21: 37
[10] Yue Z F. J Mater Sci Technol, 2002; 21: 335
[11] Yue Z F, Lu Z Z. Mater Sci Eng, 2003; 352A: 266
[12] Yue Z F, Wan J S, Lu Z Z. Appl Math Mech, 2003; 23:307
[13] Dorner D, Roeller K, Skrotzki B, Stoeckhert B, EggelerG. Mater Sci Eng, 2003; A357: 346
[14] Hibbit, Karlsson, Sorensen. Abaqus User's Manual, Version 5.6, 1998
[15] Yue Z F, Lu Z Z, Wang X M. Mater High Temp, 2002; 19: 147
[1] Wenshu TANG,Junfeng XIAO,Yongjun LI,Jiong ZHANG,Sifeng GAO,Qing NAN. Effect of Re-Heat Rejuvenation Treatment on γ′ Microstructure of Directionally SolidifiedSuperalloy Damaged by Creep[J]. 金属学报, 2019, 55(5): 601-610.
[2] CHEN Yunxiang YAN Wei HU Ping SHAN Yiyin YANG Ke. CDM MODELING OF CREEP BEHAVIOR OF T/P91 STEEL UNDER HIGH STRESSES  [J]. 金属学报, 2011, 47(11): 1372-1377.
[3] Guo-Dong ZHANG. Finite Element Simulation for Welding Residual Stress and Creep Damage of Welded Joint[J]. 金属学报, 2008, 44(7): 848-852 .
[4] YUE Zhufeng;LU Zhenzhou;ZHENG Changqing(Northwestern Polytechnical University;Xi'an 710072). THE CREEP─DAMAGE BEHAVIOUR FOR SINGLE CRYSTAL NICKEL-BASE SUPERALLOY[J]. 金属学报, 1995, 31(8): 370-375.
No Suggested Reading articles found!