Numerical Simulation of Mold Filling and Solidification of TiAl Base Alloy Exhaust Valve in Vertical Centrifugal Casting Process

Acta Metall Sin

2004, Vol. 40

Issue (3): 326-330 DOI:

Research Articles

Current Issue | Archive | Adv Search

Numerical Simulation of Mold Filling and Solidification of TiAl Base Alloy Exhaust Valve in Vertical Centrifugal Casting Process

WU Shiping; GUO Jingjie; JIA Jun

School of Materials Science and Engineering; Harbin Institute of Technology

Cite this article:

WU Shiping; GUO Jingjie; JIA Jun. Numerical Simulation of Mold Filling and Solidification of TiAl Base Alloy Exhaust Valve in Vertical Centrifugal Casting Process. Acta Metall Sin, 2004, 40(3): 326-330 .

Download:

PDF(16651KB)
Export: BibTeX | EndNote (RIS)

Abstract Based on N--S function, continuity function, function of Fourier heat conduction and experiments, a mathematical model of mold filling and solidification in vertical centrifugal casting is presented by taking centrifugal force, gravity and Coriolis force into consideration. This model is further applied to numerical simulation of temperature field, flow field and pressure field of vertical centrifugal casting process of exhaust valve made of TiAl base alloy. The result of numerical simulation shows that the mold filling of vertical centrifugal casting consists of forward--direction filling and back--direction filling. Gas--holes defect easily appears at the entrance of valve. The two orders also exist in solidification proces and are major reason for formation of off—axis shrinkage nearby the side of filling first.

Key words: TiAl base alloy centrifugal casting

Received: 06 December 2002

ZTFLH:	TG21
	TG29.4

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	WU Shiping
	GUO Jingjie
	JIA Jun

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y2004/V40/I3/326

[1] Sheng W B, Ding H S, Guo J J, Su Y Q, Jia J. Foundry, 2000: 49(3) :125(盛文斌,丁宏升,郭景杰,苏彦庆,贾均.铸造,2000;49(3) :125)
[2] Sheng W B, Guo J J, Su Y Q, Chen H S, Jia J. Mater Sci Technol, 2001; 17(5) :569
[3] Murta k, Takada M, Nakata T, Nunomura S. Imono, 1992; 64(8) :537
[4] Yang G Z, Wei B K, Xu Z L, Lin H T, Yah Y W. Spec Cast Nonferrous Alloys, 1997; 2:11(扬光照,魏伯康,徐自立,林汉同,严有为.特种铸造及合金,1997;2:11)
[5] Xu Z L, Yang G Z, Wei B K, Lin H T. Hot Work Technology, 1994; 6:5(徐自立,扬光照,魏伯康,林汉同.热加工工艺,1994;6:5)
[6] Zhang B S, Chen H S, Lin B N, An G Y. Foundry, 1994; 1:1(张宝生,陈洪升,林柏年,安阁英.铸造,1994;1:1)
[7] Wang Q D, Ding W J,Jin J Z, Chen Q Y,Yin Y S. Foundry, 1998; 10:16(王渠东,丁文江,金俊泽,陈秋勇,尹衍升.铸造,1998;10:16)
[8] Zhang B S, Chen H S, An G Y, Lin B N. Foundry, 1995; 3:6(张保生,陈洪升,安阁英,林柏年.铸造,1995;3:6)
[9] Jong S H, Hwang W S. AFS Trans, 1992; 100:489
[10] Xue X, Hansen S F, Hansen P N. AFS Trans, 1993; 101:549
[11] Jong S H, Hwang W S. AFS Trans, 1991; 99:117
[12] Song G M, Zhou Y, Sun Y, Lei T C. Ceram Int, 1998; 24(6) : 455
[13] Larsen D, Colvin G. J Miner Met Mater Soc, 1999; 6:26
[14] Wu S P, Guo J J, Su Y Q, Jia J. Foundry, 2001; 5:25(吴士平,郭景杰,苏彦庆,贾均.铸造,2001;5:25)

[1]	LIU Renci, WANG Zhen, LIU Dong, BAI Chunguang, CUI Yuyou, YANG Rui. MICROSTRUCTURE AND TENSILE PROPERTIES OF Ti－45.5Al－2Cr－2Nb－0.15B ALLOY PROCESSED BY HOT EXTRUSION[J]. 金属学报, 2013, 49(6): 641-648.
[2]	HU Rui, LIU Yi, ZHANG Tiebang, KOU Hongchao, LI Jinshan. PHASE SELECTION AND THE SOLIDIFICATION CHARACTERISTICS OF TiAl BASE ALLOYS IN THE NONEQUILIBRIUM SOLIDIFICATION[J]. 金属学报, 2013, 49(11): 1295-1302.
[3]	MA Yingche WANG Weidong CHEN Bo GAO Ming LIU Kui LI Yiyi. INTERFACE REACTION BETWEEN CERAMIC MOULDS AND Ti46Al1B AS--CAST VALVES[J]. 金属学报, 2009, 45(3): 369-373.
[4]	LIANG Wei;LI Qiang;YANG Dezhuang (Harbin Institute of Technologli; Harbin 150001)(Taiyuan University of Technology; Taiyuan 030024). DEFORMATION AND FRACTURE OF TWO-PHASE TiAl BASE ALLOY WITH A LAMELLAR STRUCTURE AT ROOM TEMPERATURE[J]. 金属学报, 1997, 33(3): 292-296.
[5]	LIANG Wei; LI Qiang; LIU Huiting; YANG Dezhuang (Taiyuan University of Technology; Taiyuan 030024)(Harbin Institute of Technology; Harbin 15000l)(Manuscript received 1995-05-24; in revised form 1995-11-03). MECHANICAL TWINNING IN DOUBLE-PHASE TiAl BASE ALLOY WITH A LAMELLAR STRUCTURE[J]. 金属学报, 1996, 32(2): 154-158.
[6]	GE Yunlong;YANG Yuansheng;JIAO Yuning;HU Zhuangqi;GAO Yunyan;JIA Guanglin Institute of Metal Research; Academia Sinica; Shenyang Northeast University of Technology; Shenyang associate professor;Institute of Metal Research;Academia Sinica;Shenyang 110015. NEW TECHNIQUE-ELECTROMAGNETIC CENTRIFUGAL CASTING PROCESS[J]. 金属学报, 1993, 29(3): 88-89.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed