Please wait a minute...
金属学报  1988, Vol. 24 Issue (2): 76-83    
  论文 本期目录 | 过刊浏览 |
铌单晶循环变形过程中的表面形变带
林栋梁;吴建生
上海交通大学;教授;上海交通大学
DEFORMATION BANDS ON SURFACE OF NIOBIUM SINGLE CRYSTALS DURING CYCLIC DEFORMATION
LIN Dongliang (T. L. Lin)Professar;Dept.of Materials Science.Shanghai Jiaotong University;WU Jiansheng Shanghai Jiaotong University
引用本文:

林栋梁;吴建生. 铌单晶循环变形过程中的表面形变带[J]. 金属学报, 1988, 24(2): 76-83.
, . DEFORMATION BANDS ON SURFACE OF NIOBIUM SINGLE CRYSTALS DURING CYCLIC DEFORMATION[J]. Acta Metall Sin, 1988, 24(2): 76-83.

全文: PDF(3194 KB)  
摘要: 用光学显微镜和扫描电镜观察了〔321〕和〔110〕位向的铌单晶在循环变形时的表面形貌变化.研究了圆形试样经过循环变形到饱和阶段表面出现的皱褶.本文用形变带这个词来表示材料经不均匀变形后产生的这种皱带,它不同于有特定位向的扭折带.根据表面形貌细节把形变带分成五类,并对形变带的形成过程进行了讨论.形变带所在平面和轴向夹角均在≈45°,说明宏观应力状态对形变带的形成起重要作用.
关键词 铌单晶循环变形形变带    
Abstract:The surface morphology of niobium single crystals with [321]and [110] orientations during the deformation has been observed. Specimens withround cross section have been cycled to the saturated stage and the surface topog-raphy of rumpled bands has been observed using optical and scanning electron mi-croscope. In the present paper, the term of "deformation band", which is defferentfrom the kink band with special orientation, is used to define the rumpled band ofmaterial that has undergone inhomogenous plastic deformation. According to thedetailed topography, the deformation bands have been further subdivided into fivetypes and their formation process has been discussed. The deformation bands lie onthe plane of approximately 45° to the loading axis, i. e. the plane of the maxi-mum shear stress, which indicates that the macroscopic state of stress plays an im-portant role on the formation of deformation bands.
Key wordsniobium single crystals    cyclic deformation    deformation bands
收稿日期: 1988-02-18     
基金资助:中国科学院科学基金
1 Saletore M, Taggart R. Mater Sce Eng, 1978; 36: 259
2 Mughrabi H, Herz K, Stark X. Int J Fract, 1981; 17: 193
3 Lin Dongliang, Wu Jiansheng, Chen Xianfeng. Mater Sci Eng, 1987; 85: 19
4 吴建生.博士学位论文.上海交通大学,1985
5 Orowan E. Nature (London), 1942; 149: 643
6 A.塞格,张宏图译.晶体的范性及其理论.北京:科学出版社,1963:121
7 Crocker A G, Abell J S. Phil Mag, 1976; 33: 305
8 Guiu P, Pratt P L. Phys Status Solidi, 1966; 15: 539
9 Keh A S. Phil Mag, 1965; 12: 9
10 Duesbery M S, Foxall P A. Phil Mag, 1969; 20: 719
11 Flewitt P E J, Crocker A G. Phil Mag, 1976; 34: 877
12 Anglada M, Guiu F. Phil Mag A, 1981; 44: 433
13 Doner M, Diprimio J C, Salkovitz E I. Acta Metall, 1973; 21: 1547
14 Cotrell A H,葛庭燧译.晶体中的范性流变.北京:科学出版社,1960:174
15 冯端,王业宁,丘第荣.金属物理,下册.北京:科学出版社,1975:647
16 Hirsch P B. Prog Met Phys, 1956; 6: 236
17 Tapetado E G, Loretto M H. Phil Mag, 1974; 30: 30
18 Kuhlmann-Wilsdorf D. Phys Status Solidi (a), 1978: 47: 639
[1] 张禄, 余志伟, 张磊成, 江荣, 宋迎东. GH4169高温合金热机械疲劳循环损伤机理及数值模拟[J]. 金属学报, 2023, 59(7): 871-883.
[2] 陈雷, 郝硕, 邹宗园, 韩舒婷, 张荣强, 郭宝峰. TRIP型双相不锈钢Fe-19.6Cr-2Ni-2.9Mn-1.6Si在循环变形条件下的力学特性[J]. 金属学报, 2019, 55(12): 1495-1502.
[3] 郭廷彪, 李琦, 王晨, 张锋, 贾智. 单晶Cu等通道转角挤压A路径形变特征及力学性能[J]. 金属学报, 2017, 53(8): 991-1000.
[4] 车欣, 梁兴奎, 陈丽丽, 陈立佳, 李锋. Al-9.0%Si-4.0%Cu-0.4%Mg(-0.3%Sc)合金的显微组织及其低周疲劳行为*[J]. 金属学报, 2014, 50(9): 1046-1054.
[5] 张思倩, 吴伟, 陈丽丽, 车欣, 陈立佳. 热处理对挤压变形Mg-7%Zn-0.6%Zr-0.5%Y合金低周疲劳行为的影响*[J]. 金属学报, 2014, 50(6): 700-706.
[6] 姜庆伟 刘印 王尧 晁月盛 李小武. 超细晶铜在退火与高温变形条件下微观结构的不稳定性研究[J]. 金属学报, 2009, 45(7): 873-879.
[7] 阚前华; 康国政; 钱林茂; 刘宇杰; 王海林 . 超弹性NiTi合金相变棘轮行为的实验研究[J]. 金属学报, 2008, 44(8): 949-955 .
[8] 杨瑞青; 李守新; 李广义; 张哲峰 . 不同取向疲劳态铜单晶高速冲击下的绝热剪切带[J]. 金属学报, 2006, 42(3): 245-250 .
[9] 郭素娟; 康国政 . SiCp/6061Al合金复合材料循环变形行为的有限元模拟[J]. 金属学报, 2006, 42(10): 1051-1055 .
[10] 杨继红; 张新平; Y.W.Mai; 李勇 . 铜单晶循环变形饱和阶段疲劳裂纹萌生及表面区域内应力分布的模拟[J]. 金属学报, 2005, 41(1): 9-.
[11] 陈常强; 李守新; 卢柯 . 循环形变下纯钛中两种γ氢化物的不同变形行为[J]. 金属学报, 2003, 39(2): 120-125 .
[12] 李勇; 李守新; 李广义 . 晶粒组元沿晶界旋转的铜双晶在循环变形中的滑移形貌与位错组态[J]. 金属学报, 2002, 38(8): 819-824 .
[13] 陆永浩; 乔利杰; 褚武扬 . Cu-Ni-Al形状记忆合金形变、相变以及裂纹形核的相互关系[J]. 金属学报, 2001, 37(7): 686-690 .
[14] 张哲峰; 胡运明; 王中光 . 镶嵌晶粒和晶界对铜双晶体循环变形行为的影响[J]. 金属学报, 1999, 35(7): 715-720 .
[15] 王明章; 李小燕; 林实; 王中光; 肖纪美 . 计算机模拟晶界位向对双晶体循环形变行为的影响[J]. 金属学报, 1999, 35(1): 27-31 .