Please wait a minute...
金属学报  2026, Vol. 62 Issue (5): 705-720    DOI: 10.11900/0412.1961.2025.00317
  综述 本期目录 | 过刊浏览 |
金属材料晶界结构的拓扑性质与表征
朱思瑛(), 易敏, 郭万林()
南京航空航天大学 航空航天结构力学及控制全国重点实验室 南京 210016
Topological Properties and Characteristics of Grain Boundary Structure in Metallic Materials
ZHU Siying(), YI Min, GUO Wanlin()
State Key Lab of Mechanics and Control for Aerospace Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
引用本文:

朱思瑛, 易敏, 郭万林. 金属材料晶界结构的拓扑性质与表征[J]. 金属学报, 2026, 62(5): 705-720.
Siying ZHU, Min YI, Wanlin GUO. Topological Properties and Characteristics of Grain Boundary Structure in Metallic Materials[J]. Acta Metall Sin, 2026, 62(5): 705-720.

全文: PDF(5290 KB)   HTML
摘要: 

金属晶界的拓扑性质对其力学、电学及化学性能具有关键影响,是晶界工程(GBE)研究的核心内容之一。本文系统综述了金属晶界结构拓扑特性在不同尺度上的研究进展,涵盖从原子尺度的拓扑结构到介观尺度的晶界网络拓扑两个方面。首先,总结了晶界原子结构拓扑研究的现状,包括重位点阵(CSL)模型、位移对称完整(DSC)点阵理论、晶界位错网络的拓扑表征以及拓扑缺陷的分析。随后,介绍了介观尺度晶界网络的表征方法,重点阐述了基于离散胞复形(DCC)的拓扑研究框架,并系统分析了晶界网络的拓扑特性。最后,展望了晶界拓扑研究在材料设计中的潜在应用方向。

关键词 : 金属材料,  晶界,  拓扑,  微观结构    
Abstract:

The topological properties of metallic grain boundaries are crucial in determining their mechanical, electrical, and chemical behaviors, making them a major focus of grain boundary engineering. This study systematically reviews recent advancements in understanding the topological characteristics of metallic grain boundary structures at various scales, including atomic-scale topological configurations and mesoscale grain boundary network topology. It begins by summarizing current research on the topology of grain boundary atomic structures, including the coincidence site lattice model, displacement shift complete lattice theory, topological characterisation of grain boundary dislocation networks, and analysis of topological defects. It then introduces characterisation methods for mesoscale grain boundary networks, emphasising a research framework based on discrete cell complexes and systematically examining the topological properties of these networks. Finally, potential applications of grain boundary topology research in materials design are discussed.

Key words: metallic material    grain boundary    topology    microstructure
收稿日期: 2025-10-10     
ZTFLH:  TG146  
基金资助:国家自然科学基金项目(T2293691);中央高校基本科研业务费项目(NJ2024001);江苏省自然科学基金项目(BK20243065);江苏省自然科学基金项目(BK20243044);江苏省自然科学基金项目(BK20251410);机械结构力学及控制国家重点实验室研究基金项目(MCAS-L-0525K01)
通讯作者: 朱思瑛,siying.zhu@nuaa.edu.cn,主要从事金属材料晶界结构的力学性能研究;
作者简介: 朱思瑛,女,1994年生,副教授,博士
图1  晶界结构的历史模型[3]
图2  晶界相图及其在材料设计中的应用[19]
图3  由过剩体积通过瞬态拓扑转变(TTT)引发晶界塑性变形的示意图、高分辨TEM (HRTEM)像及晶格应变图[66]
图4  通过蓝色立方晶格绕垂直于纸面的[001]轴旋转获得的共格点阵构型(重合点阵密度倒数Σ ≤ 25)[3],Σ3和Σ9晶界、Σ3晶界在应变驱动下的演化和Σ3 n 相互作用示意图[104]
图5  纯金属Ti中Σ13 [0001]倾斜晶界处Fe“笼状”结构的三维(3D)原子构型示意图和HAADF-STEM像,及对称Σ13 [0001] {7¯520}倾斜晶界原子结构的HAADF-STEM像[2]
图6  {213¯0}[0001]取向下晶界位错网络的拓扑转变[114]
图7  热轧钛合金板材的晶界图、反极图叠加晶界图及取向差角分布[139]
图8  3D晶界网络与离散胞复形的映射关系,不同大塑性变形(SPD)工艺处理的演化范围[1],3D晶界网络的连续动态再结晶(CDRX)演化过程示意图,及Betti数在有限元(FEM)样品中的分布[153]
[1] Zhu S Y, Borodin E, Jivkov A P. Topological characteristics of grain boundary networks during severe plastic deformations of copper alloys [J]. Acta Mater., 2023, 259: 119290
doi: 10.1016/j.actamat.2023.119290
[2] Devulapalli V, Chen E Z, Brink T, et al. Topological grain boundary segregation transitions [J]. Science, 2024, 386: 420
doi: 10.1126/science.adq4147 pmid: 39446949
[3] Rohrer G S. Grain boundary energy anisotropy: A review [J]. J. Mater. Sci., 2011, 46: 5881
doi: 10.1007/s10853-011-5677-3
[4] Gleiter H. On the structure of grain boundaries in metals [J]. Mater. Sci. Eng., 1982, 52: 91
doi: 10.1016/0025-5416(82)90040-4
[5] Priester L. Grain Boundaries: From Theory to Engineering [M]. New York: Springer, 2012: 1
[6] Randle V. The Measurement of Grain Boundary Geometry [M]. Boca Raton: CRC Press, 2017: 1
[7] Han J, Thomas S L, Srolovitz D J. Grain-boundary kinetics: A unified approach [J]. Prog. Mater. Sci., 2018, 98: 386
doi: 10.1016/j.pmatsci.2018.05.004
[8] Schuh C A, Lu K. Stability of nanocrystalline metals: The role of grain-boundary chemistry and structure [J]. MRS Bull., 2021, 46: 225
doi: 10.1557/s43577-021-00055-x
[9] Palumbo G, Aust K T. Structure-dependence of intergranular corrosion in high purity nickel [J]. Acta Metall. Mater., 1990, 38: 2343
doi: 10.1016/0956-7151(90)90101-L
[10] Liu G H, Wang W G, Rohrer G S, et al. {111}/{111} near singular boundaries in a dynamically recrystallized Al-Zn-Mg-Cu alloy compressed at elevated temperature [J]. Acta Metall. Sin., 2024, 60: 1165
[10] 刘光辉, 王卫国, Rohrer G S 等. 高温压缩变形Al-Zn-Mg-Cu合金动态再结晶后的{111}/{111}近奇异晶界 [J]. 金属学报, 2024, 60: 1165
doi: 10.11900/0412.1961.2023.00170
[11] Wang G J, Vitek V. Relationships between grain boundary structure and energy [J]. Acta Metall., 1986, 34: 951
doi: 10.1016/0001-6160(86)90068-4
[12] Bulatov V V, Reed B W, Kumar M. Grain boundary energy function for fcc metals [J]. Acta Mater., 2014, 65: 161
doi: 10.1016/j.actamat.2013.10.057
[13] Ratanaphan S, Olmsted D L, Bulatov V V, et al. Grain boundary energies in body-centered cubic metals [J]. Acta Mater., 2015, 88: 346
doi: 10.1016/j.actamat.2015.01.069
[14] Chen K T, Srolovitz D J, Han J. Grain-boundary topological phase transitions [J]. Proc. Natl. Acad. Sci. USA, 2020, 117: 33077
doi: 10.1073/pnas.2017390117 pmid: 33318180
[15] Wang J W, Chen Y B, Zhu Q, et al. Grain boundary dominated plasticity in metallic materials [J]. Acta Metall. Sin., 2022, 58: 726
doi: 10.11900/0412.1961.2021.00594
[15] 王江伟, 陈映彬, 祝 祺 等. 金属材料的晶界塑性变形机制 [J]. 金属学报, 2022, 58: 726
doi: 10.11900/0412.1961.2021.00594
[16] Reed B W, Kumar M, Minich R W, et al. Fracture roughness scaling and its correlation with grain boundary network structure [J]. Acta Mater., 2008, 56: 3278
doi: 10.1016/j.actamat.2008.03.019
[17] Gao Y, Liu X, Wang Y Q, et al. The role of special grain boundaries in enhancing creep performance in the welded joint of a novel Fe-Ni-based superalloy through aging treatment [J]. Mater. Charact., 2025, 224: 115010
doi: 10.1016/j.matchar.2025.115010
[18] Zheng X Y, Chen X, He M L, et al. Multi-scale simulation of mechanical properties of 6XXX aluminum alloy based on crystal plasticity [J]. Acta Metall. Sin., 2025, 61: 1758
doi: 10.11900/0412.1961.2024.00083
[18] 郑潇禹, 陈 辛, 何美玲 等. 基于晶体塑性的6XXX铝合金力学性能多尺度计算 [J]. 金属学报, 2025, 61: 1758
doi: 10.11900/0412.1961.2024.00083
[19] Hu C Z, Li Y W, Yu Z Y, et al. Computing grain boundary diagrams of thermodynamic and mechanical properties [J]. npj Comput. Mater., 2021, 7: 159
doi: 10.1038/s41524-021-00625-2
[20] Marquardt K, Rohrer G S, Morales L, et al. The most frequent interfaces in olivine aggregates: The GBCD and its importance for grain boundary related processes [J]. Contrib. Mineral. Petrol., 2015, 170: 40
doi: 10.1007/s00410-015-1193-9
[21] Chookajorn T, Murdoch H A, Schuh C A. Design of stable nanocrystalline alloys [J]. Science, 2012, 337: 951
doi: 10.1126/science.1224737 pmid: 22923577
[22] Garner A, Euesden R, Yao Y C, et al. Multiscale analysis of grain boundary microstructure in high strength 7xxx Al alloys [J]. Acta Mater., 2021, 202: 190
doi: 10.1016/j.actamat.2020.10.021
[23] Wilde G, Divinski S. Grain boundaries and diffusion phenomena in severely deformed materials [J]. Mater. Trans., 2019, 60: 1302
doi: 10.2320/matertrans.MF201934
[24] Leitner K, Lutz D, Knabl W, et al. Grain boundary segregation engineering in as-sintered molybdenum for improved ductility [J]. Scr. Mater., 2018, 156: 60
doi: 10.1016/j.scriptamat.2018.07.008
[25] Zhu Y L, Cao Y, Tian W, et al. New insights into ductility improvement of a nickel-based superalloy through grain boundary engineering [J]. Mater. Sci. Eng., 2024, A908: 146786
[26] Tikhonova M, Kaibyshev R, Belyakov A. Microstructure and mechanical properties of austenitic stainless steels after dynamic and post-dynamic recrystallization treatment [J]. Adv. Eng. Mater., 2018, 20: 1700960
doi: 10.1002/adem.v20.7
[27] Zhuo Z, Xia S, Bai Q, et al. The effect of grain boundary character distribution on the mechanical properties at different strain rates of a 316L stainless steel [J]. J. Mater. Sci., 2018, 53: 2844
doi: 10.1007/s10853-017-1695-0
[28] Naydenkin E V, Ratochka I V, Mishin I P, et al. The effect of interfaces on mechanical and superplastic properties of titanium alloys [J]. J. Mater. Sci., 2017, 52: 4164
doi: 10.1007/s10853-016-0508-1
[29] Li L L, Zhang P, Zhang Z J, et al. Strain localization and fatigue cracking behaviors of Cu bicrystal with an inclined twin boundary [J]. Acta Mater., 2014, 73: 167
doi: 10.1016/j.actamat.2014.04.004
[30] Jin Y J, Lu H, Yu C, et al. Study on grain boundary character and strain distribution of intergranular cracking in the CGHAZ of T23 steel [J]. Mater. Charact., 2013, 84: 216
doi: 10.1016/j.matchar.2013.08.004
[31] Das A. Grain boundary engineering: fatigue fracture [J]. Philos. Mag., 2017, 97: 867
doi: 10.1080/14786435.2017.1285072
[32] Lu K. Stabilizing nanostructures in metals using grain and twin boundary architectures [J]. Nat. Rev. Mater., 2016, 1: 16019
doi: 10.1038/natrevmats.2016.19
[33] Van Swygenhoven H. Grain boundaries and dislocations [J]. Science, 2002, 296: 66
pmid: 11935012
[34] Hirth J P. The influence of grain boundaries on mechanical properties [J]. Metall. Trans., 1972, 3: 3047
[35] Palumbo G, Lehockey E M, Lin P. Applications for grain boundary engineered materials [J]. JOM, 1998, 50(2): 40
[36] Randle V, Ralph B. Grain boundary structure and mechanical properties [J]. Rev. Phys. Appl., 1988, 23: 501
[37] Kheradmand N, Barnoush A, Vehoff H. Investigation of the role of grain boundary on the mechanical properties of metals [J]. J. Phys.: Conf. Ser., 2010, 240: 012017
[38] Randle V, Owen G. Mechanisms of grain boundary engineering [J]. Acta Mater., 2006, 54: 1777
doi: 10.1016/j.actamat.2005.11.046
[39] Randle V. ‘Special’ boundaries and grain boundary plane engineering [J]. Scr. Mater., 2006, 54: 1011
doi: 10.1016/j.scriptamat.2005.11.050
[40] Randle V. Grain boundary engineering: An overview after 25 years [J]. Mater. Sci. Technol., 2010, 26: 253
doi: 10.1179/026708309X12601952777747
[41] Watanabe T. Grain boundary engineering: Historical perspective and future prospects [J]. J. Mater. Sci., 2011, 46: 4095
doi: 10.1007/s10853-011-5393-z
[42] Raabe D, Herbig M, Sandlöbes S, et al. Grain boundary segregation engineering in metallic alloys: A pathway to the design of interfaces [J]. Curr. Opin. Solid State Mater. Sci., 2014, 18: 253
doi: 10.1016/j.cossms.2014.06.002
[43] Xu X M, Zhong Y J, Wajrak M, et al. Grain boundary engineering: An emerging pathway toward efficient electrocatalysis [J]. InfoMat, 2024, 6: e12608
doi: 10.1002/inf2.12608
[44] Tiamiyu A A, Pang E L, Chen X, et al. Nanotwinning-assisted dynamic recrystallization at high strains and strain rates [J]. Nat. Mater., 2022, 21: 786
doi: 10.1038/s41563-022-01250-0 pmid: 35590039
[45] Figueiredo R B, Langdon T G. Fabricating ultrafine-grained materials through the application of severe plastic deformation: A review of developments in brazil [J]. J. Mater. Res. Technol., 2012, 1: 55
doi: 10.1016/S2238-7854(12)70010-8
[46] Panzarino J F, Pan Z L, Rupert T J. Plasticity-induced restructuring of a nanocrystalline grain boundary network [J]. Acta Mater., 2016, 120: 1
doi: 10.1016/j.actamat.2016.08.040
[47] Fu H L, Zhou X, Gao Z P, et al. Effect of grain geometry on the stability of polycrystalline Pt at the nanoscale [J]. Phys. Rev. Lett., 2025, 134: 056101
[48] Zhang L, Lu C, Tieu K. A review on atomistic simulation of grain boundary behaviors in face-centered cubic metals [J]. Comput. Mater. Sci., 2016, 118: 180
doi: 10.1016/j.commatsci.2016.03.021
[49] Pan X L, Zhou L C, Wang C X, et al. Microstructure and residual stress modulation of 7075 aluminum alloy for improving fatigue performance by laser shock peening [J]. Int. J. Mach. Tools Manuf., 2023, 184: 103979
doi: 10.1016/j.ijmachtools.2022.103979
[50] Abdeljawad F, Foiles S M, Moore A P, et al. The role of the interface stiffness tensor on grain boundary dynamics [J]. Acta Mater., 2018, 158: 440
doi: 10.1016/j.actamat.2018.06.025
[51] Randle V. The Role of the Coincidence Site Lattice in Grain Boundary Engineering [M]. London: CRC Press, 2024: 1
[52] Lee D S, Ryoo H S, Hwang S K. A grain boundary engineering approach to promote special boundaries in Pb-base alloy [J]. Mater. Sci. Eng., 2003, A354: 106
[53] Warren P, Raju N, Prasad A, et al. Grain and grain boundary segmentation using machine learning with real and generated datasets [J]. Comput. Mater. Sci., 2024, 233: 112739
doi: 10.1016/j.commatsci.2023.112739
[54] Zhu Q, Samanta A, Li B X, et al. Predicting phase behavior of grain boundaries with evolutionary search and machine learning [J]. Nat. Commun., 2018, 9: 467
doi: 10.1038/s41467-018-02937-2 pmid: 29391453
[55] Huber L, Hadian R, Grabowski B, et al. A machine learning approach to model solute grain boundary segregation [J]. npj Comput. Mater., 2018, 4: 64
doi: 10.1038/s41524-018-0122-7
[56] Zhang J N, Koneru A, Sankaranarayanan S K R S, et al. Graph neural network guided evolutionary search of grain boundaries in 2D materials [J]. ACS Appl. Mater. Interfaces, 2023, 15: 20520
doi: 10.1021/acsami.3c01161
[57] van Beers P R M, Kouznetsova V G, Geers M G D, et al. A multiscale model of grain boundary structure and energy: From atomistics to a continuum description [J]. Acta Mater., 2015, 82: 513
doi: 10.1016/j.actamat.2014.08.045
[58] Song X Y, Deng C. Atomic energy in grain boundaries studied by machine learning [J]. Phys. Rev. Mater., 2022, 6: 043601
[59] Patala S. Topological analysis of the grain boundary space [D]. Cambridge: Massachusetts Institute of Technology, 2011
[60] Wakai F, Shinoda Y, Ishihara S, et al. Topological transformation of grains in three-dimensional normal grain growth [J]. J. Mater. Res., 2001, 16: 2136
doi: 10.1557/JMR.2001.0291
[61] Gao N N, Zhao Y, Xia W Q, et al. Phase-field crystal studies on grain boundary migration, dislocation behaviors, and topological transition under tension of square polycrystals [J]. Crystals, 2023, 13: 777
doi: 10.3390/cryst13050777
[62] Narang P, Garcia C A C, Felser C. The topology of electronic band structures [J]. Nat. Mater., 2021, 20: 293
doi: 10.1038/s41563-020-00820-4 pmid: 33139890
[63] Gupta S, Saxena A. A topological twist on materials science [J]. MRS Bull., 2014, 39: 265
doi: 10.1557/mrs.2014.28
[64] Hirth J P, Balluffi R W. On grain boundary dislocations and ledges [J]. Acta Metall., 1973, 21: 929
doi: 10.1016/0001-6160(73)90150-8
[65] Gleiter H. Nanostructured materials: Basic concepts and microstructure [J]. Acta Mater., 2000, 48: 1
doi: 10.1016/S1359-6454(99)00285-2
[66] Zhu Q, Zhao Q K, Huang Q S, et al. Grain boundary plasticity initiated by excess volume [J]. Proc. Natl. Acad. Sci. USA, 2024, 121: e2400161121
doi: 10.1073/pnas.2400161121
[67] Ma K K, Wen H M, Hu T, et al. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy [J]. Acta Mater., 2014, 62: 141
doi: 10.1016/j.actamat.2013.09.042
[68] Hellman O C, Vandenbroucke J A, Rüsing J, et al. Analysis of three-dimensional atom-probe data by the proximity histogram [J]. Microsc. Microanal., 2000, 6: 437
pmid: 11003678
[69] Wagih M, Larsen P M, Schuh C A. Learning grain boundary segregation energy spectra in polycrystals [J]. Nat. Commun., 2020, 11: 6376
doi: 10.1038/s41467-020-20083-6 pmid: 33311515
[70] Wei C Z, Thomas S L, Han J, et al. A continuum multi-disconnection-mode model for grain boundary migration [J]. J. Mech. Phys. Solids, 2019, 133: 103731
doi: 10.1016/j.jmps.2019.103731
[71] Wang L H, Zhang Y, Zeng Z, et al. Tracking the sliding of grain boundaries at the atomic scale [J]. Science, 2022, 375: 1261
doi: 10.1126/science.abm2612 pmid: 35298254
[72] Lu K. Gradient nanostructured materials [J]. Acta Metall. Sin., 2015, 51: 1
doi: 10.11900/0412.1961.2014.00395
[72] 卢 柯. 梯度纳米结构材料 [J]. 金属学报, 2015, 51: 1
[73] Fu H L, Zhou X, Gao Z P, et al. Pt Schwarz crystals stabilized by minimal-surface grain boundaries and twins at the grain size limit [J]. Acta Mater., 2024, 276: 120007
doi: 10.1016/j.actamat.2024.120007
[74] Lu L, Shen Y F, Chen X H, et al. Ultrahigh strength and high electrical conductivity in copper [J]. Science, 2004, 304: 422
pmid: 15031435
[75] Zhu Q, Huang Q S, Guang C, et al. Metallic nanocrystals with low angle grain boundary for controllable plastic reversibility [J]. Nat. Commun., 2020, 11: 3100
doi: 10.1038/s41467-020-16869-3 pmid: 32555195
[76] Cantwell P R, Tang M, Dillon S J, et al. Grain boundary complexions [J]. Acta Mater., 2014, 62: 1
doi: 10.1016/j.actamat.2013.07.037
[77] Cantwell P R, Frolov T, Rupert T J, et al. Grain boundary complexion transitions [J]. Annu. Rev. Mater. Res., 2020, 50: 465
doi: 10.1146/annurev-matsci-081619-114055
[78] Zhang Z B, Yang Z B, Lu S, et al. Strain localisation and failure at twin-boundary complexions in nickel-based superalloys [J]. Nat. Commun., 2020, 11: 4890
doi: 10.1038/s41467-020-18641-z pmid: 32994396
[79] Krause A R, Cantwell P R, Marvel C J, et al. Review of grain boundary complexion engineering: Know your boundaries [J]. J. Am. Ceram. Soc., 2019, 102: 778
doi: 10.1111/jace.16045
[80] Grimmer H, Bollmann W, Warrington D H. Coincidence-site lattices and complete pattern-shift in cubic crystals [J]. Acta Cryst., 1974, 30A: 197
[81] Bollmann W. Crystal Defects and Crystalline Interfaces [M]. Berlin: Springer, 2012: 1
[82] Pond R C, Bollmann W. The symmetry and interfacial structure of bicrystals [J]. Philos. Trans. Roy. Soc., 1979, 292A: 449
[83] Warrington D H, Bollmann W. Dislocation networks in high-angle grain boundaries [J]. Philos. Mag., 1972, 25: 1195
doi: 10.1080/14786437208226861
[84] Bollmann W. On the geometry of grain and phase boundaries: I. General theory [J]. Philos. Mag., 1967, 16: 363
[85] Randle V, Rohrer G S, Miller H M, et al. Five-parameter grain boundary distribution of commercially grain boundary engineered nickel and copper [J]. Acta Mater., 2008, 56: 2363
doi: 10.1016/j.actamat.2008.01.039
[86] Ratanaphan S, Yoon Y, Rohrer G S. The five parameter grain boundary character distribution of polycrystalline silicon [J]. J. Mater. Sci., 2014, 49: 4938
doi: 10.1007/s10853-014-8195-2
[87] An D, Griffiths T A, Konijnenberg P, et al. Correlating the five parameter grain boundary character distribution and the intergranular corrosion behaviour of a stainless steel using 3D orientation microscopy based on mechanical polishing serial sectioning [J]. Acta Mater., 2018, 156: 297
doi: 10.1016/j.actamat.2018.06.044
[88] Brandon D G. The structure of high-angle grain boundaries [J]. Acta Metall., 1966, 14: 1479
doi: 10.1016/0001-6160(66)90168-4
[89] Bollmann W. The basic concepts of the 0-lattice theory [J]. Surf. Sci., 1972, 31: 1
doi: 10.1016/0039-6028(72)90250-6
[90] Bollmann W. O‐lattice calculation of an F.C.C.-B.C.C. interface [J]. Phys. Status Solidi, 1974, 21A: 543
[91] Li M, Xu T. Topological and atomic scale characterization of grain boundary networks in polycrystalline and nanocrystalline materials [J]. Prog. Mater. Sci., 2011, 56: 864
doi: 10.1016/j.pmatsci.2011.01.011
[92] Jin Z H, Li X Y, Lu K. Formation of stable schwarz crystals in polycrystalline copper at the grain size limit [J]. Phys. Rev. Lett., 2021, 127: 136101
doi: 10.1103/PhysRevLett.127.136101
[93] Xu W, Zhang B, Li X Y, et al. Suppressing atomic diffusion with the Schwarz crystal structure in supersaturated Al-Mg alloys [J]. Science, 2021, 373: 683
doi: 10.1126/science.abh0700 pmid: 34353952
[94] Gu J L, Duan F H, Liu S D, et al. Phase engineering of nanostructural metallic materials: Classification, structures, and applications [J]. Chem. Rev., 2024, 124: 1247
doi: 10.1021/acs.chemrev.3c00514
[95] Meiners T, Frolov T, Rudd R E, et al. Observations of grain-boundary phase transformations in an elemental metal [J]. Nature, 2020, 579: 375
doi: 10.1038/s41586-020-2082-6
[96] Zhu S Y, Jivkov A P, Borodin E, et al. Triple junction disclinations in severely deformed Cu-0.4%Mg alloys [J]. Acta Mater., 2024, 264: 119600
doi: 10.1016/j.actamat.2023.119600
[97] Bollmann W. Triple lines in polycrystalline aggregates as disclinations [J]. Philos. Mag., 1984, 49A: 73
[98] Bollmann W. Triple-line disclinations representations, continuity and reactions [J]. Philos. Mag., 1988, 57A: 637
[99] Liu Y, Leung S, Li F F, et al. Bulk-disclination correspondence in topological crystalline insulators [J]. Nature, 2021, 589: 381
doi: 10.1038/s41586-020-03125-3
[100] Wu M S, Zhou K, Nazarov A A. Crack nucleation at disclinated triple junctions [J]. Phys. Rev., 2007, 76B: 134105
[101] Barnett A K, Hussein O, Alghalayini M, et al. Triple junction segregation dominates the stability of nanocrystalline alloys [J]. Nano Lett., 2024, 24: 9627
doi: 10.1021/acs.nanolett.4c02395
[102] Wei C Z, Zhang C L, Han J, et al. Grain boundary triple junction dynamics: A continuum disconnection model [J]. SIAM J. Appl. Math., 2020, 80: 1101
doi: 10.1137/19M1277722
[103] Annevelink E, Ertekin E, Johnson H T. Grain boundary structure and migration in graphene via the displacement shift complete lattice [J]. Acta Mater., 2019, 166: 67
doi: 10.1016/j.actamat.2018.12.030
[104] Song X Q, Tang L Y, Wang Y X, et al. Plastic strain-induced evolution of CSL boundaries at elevated temperature for Ni-base superalloy: Experimental and phase-field perspective [J]. J. Mater. Res. Technol., 2020, 9: 2535
doi: 10.1016/j.jmrt.2019.12.084
[105] Zhou S Y, Hu M H, Li C, et al. Creep behavior of a Ni-based superalloy with strengthening of γ' and γ'' phases [J]. Acta Metall. Sin., 2025, 61: 226
[105] 周生玉, 胡明昊, 李 冲 等. 一种γ'/γ''相强化镍基高温合金的蠕变行为 [J]. 金属学报, 2025, 61: 226
doi: 10.11900/0412.1961.2022.00571
[106] Zhang Y, He C Y, Yu Q, et al. Nacre-like surface nanolaminates enhance fatigue resistance of pure titanium [J]. Nat. Commun., 2024, 15: 6917
doi: 10.1038/s41467-024-51423-5 pmid: 39134556
[107] Zhou X Y, Ahmadian A, Gault B, et al. Atomic motifs govern the decoration of grain boundaries by interstitial solutes [J]. Nat. Commun., 2023, 14: 3535
doi: 10.1038/s41467-023-39302-x pmid: 37316498
[108] Schuh C A, Kumar M, King W E. Analysis of grain boundary networks and their evolution during grain boundary engineering [J]. Acta Mater., 2003, 51: 687
doi: 10.1016/S1359-6454(02)00447-0
[109] Kumar M, King W E, Schwartz A J. Modifications to the microstructural topology in f.c.c. materials through thermomechanical processing [J]. Acta Mater., 2000, 48: 2081
doi: 10.1016/S1359-6454(00)00045-8
[110] Farabi E, Tari V, Hodgson P D, et al. On the grain boundary network characteristics in a martensitic Ti-6Al-4V alloy [J]. J. Mater. Sci., 2020, 55: 15299
doi: 10.1007/s10853-020-05075-7
[111] Chen Y B, Han J, Deng H L, et al. Revealing grain boundary kinetics in three-dimensional space [J]. Acta Mater., 2024, 268: 119717
doi: 10.1016/j.actamat.2024.119717
[112] Priedeman J L, Rosenbrock C W, Johnson O K, et al. Quantifying and connecting atomic and crystallographic grain boundary structure using local environment representation and dimensionality reduction techniques [J]. Acta Mater., 2018, 161: 431
doi: 10.1016/j.actamat.2018.09.011
[113] Palumbo G, Thorpe S J, Aust K T. On the contribution of triple junctions to the structure and properties of nanocrystalline materials [J]. Scr. Metall. Mater., 1990, 24: 1347
doi: 10.1016/0956-716X(90)90354-J
[114] Chen E Z, Heo T W, Wood B C, et al. Grand canonically optimized grain boundary phases in hexagonal close-packed titanium [J]. Nat. Commun., 2024, 15: 7049
doi: 10.1038/s41467-024-51330-9 pmid: 39147757
[115] Yazyev O V, Louie S G. Topological defects in graphene: Dislocations and grain boundaries [J]. Phys. Rev., 2010, 81B: 195420
[116] Korbuly B, Plapp M, Henry H, et al. Topological defects in two-dimensional orientation-field models for grain growth [J]. Phys. Rev., 2017, 96E: 052802
[117] Barr C M, Leff A C, Demott R W, et al. Unraveling the origin of twin related domains and grain boundary evolution during grain boundary engineering [J]. Acta Mater., 2018, 144: 281
doi: 10.1016/j.actamat.2017.10.007
[118] Kinderlehrer D, Liu C. Evolution of grain boundaries [J]. Math. Models Methods Appl. Sci., 2001, 11: 713
doi: 10.1142/S0218202501001069
[119] Niño J D, Johnson O K. Influence of grain boundary energy anisotropy on the evolution of grain boundary network structure during 3D anisotropic grain growth [J]. Comput. Mater. Sci, 2023, 217: 111879
doi: 10.1016/j.commatsci.2022.111879
[120] Luo M, Liao X Z, Ringer S P, et al. Grain boundary network evolution in electron-beam powder bed fusion nickel-based superalloy Inconel 738 [J]. J. Alloys Compd., 2024, 972: 172811
doi: 10.1016/j.jallcom.2023.172811
[121] Yang X Y, Wang P, Huang M. Grain boundary evolution during low-strain grain boundary engineering achieved by strain-induced boundary migration in pure copper [J]. Mater. Sci. Eng., 2022, A833: 142532
[122] Volovitch P, Traskine V, Barrallier L. Analysis of grain boundary network topology using grain boundary wetting [J]. Z. Metallkd., 2004, 95: 215
doi: 10.3139/146.017935
[123] Minich R W, Schuh C A, Kumar M. Role of topological constraints on the statistical properties of grain boundary networks [J]. Phys. Rev., 2002, 66B: 052101
[124] Rohrer G S, Miller H M. Topological characteristics of plane sections of polycrystals [J]. Acta Mater., 2010, 58: 3805
doi: 10.1016/j.actamat.2010.03.028
[125] Liu T G, Xia S, Zhou B X, et al. Three-dimensional geometrical and topological characteristics of grains in conventional and grain boundary engineered 316L stainless steel [J]. Micron, 2018, 109: 58
doi: S0968-4328(18)30058-1 pmid: 29665457
[126] Li X Y, Jin Z H, Zhou X, et al. Constrained minimal-interface structures in polycrystalline copper with extremely fine grains [J]. Science, 2020, 370: 831
doi: 10.1126/science.abe1267 pmid: 33184210
[127] Rollett A D, Lee S B, Campman R, et al. Three-dimensional characterization of microstructure by electron back-scatter diffraction [J]. Annu. Rev. Mater. Res., 2007, 37: 627
doi: 10.1146/matsci.2007.37.issue-1
[128] Christopher W A, Oliver K J. A decision transformer approach to grain boundary network optimization [J]. Comput. Mater. Sci., 2025, 253: 113852
doi: 10.1016/j.commatsci.2025.113852
[129] Irukuvarghula S, Hassanin H, Cayron C, et al. Evolution of grain boundary network topology in 316L austenitic stainless steel during powder hot isostatic pressing [J]. Acta Mater., 2017, 133: 269
doi: 10.1016/j.actamat.2017.04.068
[130] Patala S, Mason J K, Schuh C A. Improved representations of misorientation information for grain boundary science and engineering [J]. Prog. Mater. Sci., 2012, 57: 1383
doi: 10.1016/j.pmatsci.2012.04.002
[131] Johnson O K, Lund J M, Critchfield T R. Spectral graph theory for characterization and homogenization of grain boundary networks [J]. Acta Mater., 2018, 146: 42
doi: 10.1016/j.actamat.2017.11.054
[132] Valiev R Z, Langdon T G. Principles of equal-channel angular pressing as a processing tool for grain refinement [J]. Prog. Mater. Sci., 2006, 51: 881
doi: 10.1016/j.pmatsci.2006.02.003
[133] Winning M, Gottstein G, Shvindlerman L S. On the mechanisms of grain boundary migration [J]. Acta Mater., 2002, 50: 353
doi: 10.1016/S1359-6454(01)00343-3
[134] Voyiadjis G Z. Grain boundary migration in metals: Thermodynamics, kinetics, applications [J]. J. Eng. Mech., 2000, 126: 888
[135] Jia H R, Duan S Y, Zhang Z, et al. Homogenization-based topology optimization for self-supporting additive-manufactured lattice-infilled structure [J]. Mater. Des., 2024, 245: 113264
doi: 10.1016/j.matdes.2024.113264
[136] Rohrer G S. Measuring and interpreting the structure of grain-boundary networks [J]. J. Am. Ceram. Soc., 2011, 94: 633
doi: 10.1111/jace.2011.94.issue-3
[137] Barr C M, Thomas S, Hart J L, et al. Tracking the evolution of intergranular corrosion through twin-related domains in grain boundary networks [J]. npj Mater. Degrad., 2018, 2: 14
doi: 10.1038/s41529-018-0032-7
[138] Liu T G, Xia S, Li H, et al. The highly twinned grain boundary network formation during grain boundary engineering [J]. Mater. Lett., 2014, 133: 97
doi: 10.1016/j.matlet.2014.06.166
[139] Zhu X J, Fan Q B, Liu X, et al. Microstructure evolution and mechanical properties of a hot-rolled Ti alloy [J]. Prog. Nat. Sci.: Mater. Int., 2021, 31: 105
doi: 10.1016/j.pnsc.2020.11.007
[140] Johnson O K, Schuh C A. The triple junction hull: Tools for grain boundary network design [J]. J. Mech. Phys. Solids, 2014, 69: 2
doi: 10.1016/j.jmps.2014.04.005
[141] Frary M, Schuh C A. Connectivity and percolation behaviour of grain boundary networks in three dimensions [J]. Philos. Mag., 2005, 85: 1123
doi: 10.1080/14786430412331323564
[142] Liang C G, Yin Y, Wang W X, et al. A thermodynamically consistent non-isothermal phase-field model for selective laser sintering [J]. Int. J. Mech. Sci., 2023, 259: 108602
doi: 10.1016/j.ijmecsci.2023.108602
[143] Zhang B B, Tang Y G, Mei Q S, et al. Inhibiting creep in nanograined alloys with stable grain boundary networks [J]. Science, 2022, 378: 659
doi: 10.1126/science.abq7739 pmid: 36356141
[144] Bhattacharya A, Shen Y F, Hefferan C M, et al. Grain boundary velocity and curvature are not correlated in Ni polycrystals [J]. Science, 2021, 374: 189
doi: 10.1126/science.abj3210 pmid: 34618565
[145] Lin B, Jin Y, Hefferan C M, et al. Observation of annealing twin nucleation at triple lines in nickel during grain growth [J]. Acta Mater., 2015, 99: 63
doi: 10.1016/j.actamat.2015.07.041
[146] Liu T G, Xia S, Zhou B X, et al. Three-dimensional characteristics of the grain boundary networks of conventional and grain boundary engineered 316L stainless steel [J]. Mater. Charact., 2017, 133: 60
doi: 10.1016/j.matchar.2017.09.026
[147] Wanner T, Fuller E R, Saylor D M. Homology metrics for microstructure response fields in polycrystals [J]. Acta Mater., 2010, 58: 102
doi: 10.1016/j.actamat.2009.08.061
[148] Kobayashi S, Tsurekawa S, Watanabe T. A new approach to grain boundary engineering for nanocrystalline materials [J]. Beilstein J. Nanotechnol., 2016, 7: 1829
doi: 10.3762/bjnano.7.176
[149] Yang D, Bai Q, Hu Y, et al. Fractal analysis of the effect of grain boundary character on Te-induced brittle cracking in GH3535 alloy [J]. Acta Metall. Sin., 2023, 59: 248
doi: 10.11900/0412.1961.2021.00584
[149] 杨 杜, 白 琴, 胡 悦 等. GH3535合金中晶界特征对碲致脆性开裂影响的分形分析 [J]. 金属学报, 2023, 59: 248
[150] Zhu S Y. In silico grain boundary engineering by analysis on discrete complexes [D]. Manchester: The University of Manchester, 2023
[151] Hatcher A. Algebraic Topology [M]. Beijing: Tsinghua University, 2005: 1
[152] Salnikov V, Cassese D, Lambiotte R. Simplicial complexes and complex systems [J]. Eur. J. Phys., 2018, 40: 014001
[153] Zhu S Y, Gao W J, Yi M, et al. Integrated discrete cell complexes and finite element analysis for microstructure topology evolution during severe plastic deformation [J]. Comput. Mater. Contin., 2025, 85: 657
[1] 康国政, 张旭, 胡冰晖, 双思垚, 于峻石, 熊宇凯, 宋世杰. 基于机器学习的金属材料多尺度塑性力学研究进展[J]. 金属学报, 2026, 62(5): 803-821.
[2] 吴欣强, 谭季波, 张兹瑜, 薛宝权, 柯伟. 金属材料在高温高压水、液态Pb-Bi和海洋环境中的腐蚀疲劳行为研究进展[J]. 金属学报, 2026, 62(5): 822-834.
[3] 常松涛, 张芳, 沙玉辉, 左良. 晶界偏聚元素Sb作用下无取向硅钢织构的空间分布与演变机制[J]. 金属学报, 2026, 62(4): 627-635.
[4] 申文龙, 廖宇轩, 吴学志, 姜彦博, 柳文波. 晶界沟槽形成过程的相场模拟[J]. 金属学报, 2026, 62(3): 523-531.
[5] 张哲峰, 侯嘉鹏, 刘睿, 李孝滔, 张振军, 张鹏. 金属材料强度-塑性及强度-电导率定量关系[J]. 金属学报, 2026, 62(2): 253-262.
[6] 赵晓, 徐超, 江河, 姚志浩, 董建新. GH4738镍基高温合金O累积程度对疲劳性能与晶界损伤的影响及表征[J]. 金属学报, 2026, 62(2): 328-338.
[7] 赵霞, 王旻, 郝宪朝, 张龙, 高明, 马颖澈, 刘奎. 晶界碳化物和动态再结晶对690合金柱状晶凝固组织高温塑性的影响[J]. 金属学报, 2026, 62(2): 339-350.
[8] 王启勇, 李晓博, 刘小超, 王心成, 张泰瑞, 倪中华, 陈彪. 低碳钢预制涡流搅拌摩擦焊工艺研究[J]. 金属学报, 2026, 62(1): 217-234.
[9] 马恩, 刘畅. 如何使合金兼具高强度与高塑性[J]. 金属学报, 2025, 61(5): 665-673.
[10] 彭子超, 罗俊鹏, 赵宇, 周磊, 王旭青, 邹金文. FGH96合金静态再结晶过程的显微组织演化[J]. 金属学报, 2025, 61(2): 235-242.
[11] 齐敏, 王倩, 马英杰, 曹贺萌, 黄森森, 雷家峰, 杨锐. Ti6246钛合金 β → α 相变中晶界 α 相生长行为及其对微织构的影响[J]. 金属学报, 2025, 61(2): 265-277.
[12] 赵今涛, 孙利芳, 何竹风, 刘玉杰, 马小柏, 申勇峰, 贾楠. 基于深冷轧制备的高强韧高氮奥氏体不锈钢的力学行为[J]. 金属学报, 2025, 61(12): 1884-1894.
[13] 杜文力, 侯超, 李昱嵘, 韩铁龙, 宋晓艳. Cr和Sc元素对钨基合金晶粒组织高温稳定性的影响[J]. 金属学报, 2025, 61(11): 1664-1672.
[14] 李振想, 王卫国, Rohrer Gregory S, 洪丽华, 陈松, 林燕, 周邦新. 室温和深冷轧制对纯Al再结晶{111}/{111}近奇异晶界的影响[J]. 金属学报, 2025, 61(11): 1673-1688.
[15] 罗列文, 王明洋, 高志明, 夏大海, 邓意达, 胡文彬. 高强铝合金晶界氢陷阱的原子尺度作用机制[J]. 金属学报, 2025, 61(11): 1747-1757.