Please wait a minute...
金属学报  2008, Vol. 44 Issue (3): 297-301     
  论文 本期目录 | 过刊浏览 |
纯铜双晶体拉伸变形的介观力学分析
邹风雷 高克玮 朱其芳 谢建新
北京科技大学材料学院
The mesomechanical analysis of the deformation of copper with continuous columnar crystals
ZOU Fenglei; GAO Kewei; ZHU Qifang; XIEJianxin
引用本文:

邹风雷; 高克玮; 朱其芳; 谢建新 . 纯铜双晶体拉伸变形的介观力学分析[J]. 金属学报, 2008, 44(3): 297-301 .
, , , . The mesomechanical analysis of the deformation of copper with continuous columnar crystals[J]. Acta Metall Sin, 2008, 44(3): 297-301 .

全文: PDF(1158 KB)  
摘要: 采用连续定向凝固方法可以制备具有连续柱状晶组织的纯铜杆坯,这种杆坯具有优良的塑性加工延伸性能和导电性能。利用有色金属研究院研制的介观力学观察设备,用自制的连续柱状晶加工成双晶体的拉伸样品,对其拉伸变形行为进行了研究。结果表明:在连续柱状晶纯铜变形过程中,不同的晶粒由于取向不同,产生不同的滑移方式,并且在变形过程中产生了亚晶粒。通过能量计算证明了新晶粒的产生。在连续柱状晶纯铜变形过程中,晶界有明显的协调变形的作用,正是由于这种作用,使得连续柱状晶纯铜可以产生很大的塑性变形。
关键词 介观力学连续柱状晶组织双晶体变形亚晶    
Abstract:The pure copper bar with continuous columnar crystals, which had excellent plastic workability and conductivity, was fabricated by continuous unidirectional solidification process with vacuum melting and argon protecting. This paper investigates the copper bar’s plastic deformation behavior through mesomechanical analysis with the device developed by General Research Institute for Nonferrous Metals. It was found that during the deformation, different crystals had different slip systems because of different crystal orientation, and the nucleation of a sub-grain was observed. Grain boundary played an important role in the deformation, which is the reason for excellent plastic workability.
Key wordsmesomechanical analysis    continuous columnar crystals    bicrystals deformation    sub-grains    slip-system
收稿日期: 2007-07-03     
ZTFLH:  TG146.1  
[1]Zhang H,Xie J X,Wang Z D,Wang H.Mater Mech,2004; 28(2):31 (张鸿,谢建新,王自东,王浩.机械工程材料,2004;28(2):31)
[2]Li B,Wang X,Guo J C,Fan X H,Yan W.J Xi'an Inst Technol,2005;25:579 (李炳,王鑫,郭俊仓,范新会,严文.西安工业学院学报,2005;25:579)
[3]Wu T K,Liu W.J Tsinghua Univ (Nat Sci),2005;45: 792 (吴廷坤,刘伟.清华大学学报(自然科学版),2005;45:792)
[4]Huang X X,Cai D Y,Liu Q,Yao M.Chin J Nonferrous Met,2001;11:110 (黄晓旭,蔡大勇,刘庆,姚枚.中国有色金属学报,2001;11:110)
[5]Li H Y,Yah W,Chen J,Fan X H,Wang X Y.J Xi'an Inst Technol,2006;26:64 (李红英,严文,陈建,范新会,王雪艳.西安工业学院学报,2006;26:64)
[6]uang X.Scr Mater,1998;38:1697
[7]Wang Z G,Zhang Z F,Li X.W,Jia W P,Li S X.Mater Sci Eng,2001;A319:63
[8]Li X W,Wang Z G,Li S X.Chin J Mater Res,2000;12: 36 (李小武,王中光,李守新,材料研究学报,2000;12:36)
[9]Makarov P V.Theor Appl Fract Mech,2000;33:23
[10]Panin V,Kolubaev A,Tarasov S,Popov V.Wear,2002; 249:860
[11]Miravete A,Bielsa J M,Chiminelli A,Cuartero J,Serrano S,Tolosana N.Compos Sci Technol,2006;66:2954
[12]LI Y,Li S X,Li G Y.Acta Metall Sin,2002:38:819 (李勇,李守新,李广义.金属学报,2002;38:819)
[13]Yang J X.Fundamental of Metalline Plastic Deformation. Beijng:Metallurgical Industry Press,1988:179 (杨觉先.金属塑性变形物理基础.北京:冶金工业出版社,1988:179)
[14]Huang X X,Cai D Y,Yao M,Liu Q,Hansen N.Chin J Nonferrous Met,2001;11:31 (黄晓旭,蔡大勇,姚枚,刘庆,Hansen N.中国有色金属学报,2001;11:31)
[15]Chen M A,Li H Z,Li X Q,Liu C M.Mater Sci Eng, 2007;A452:454
[16]Xiao J M,Zhu F W.Study of Material Energy.Shanghai: Shanghai Science & Technology Press,1999:336,400 (肖纪美、朱逢吾.材料能量学.上海:上海科学技术出版社,1999:336,400)
[17]Zheng Z Q.Fundamental of Material Sciences.Changsha: Zhongnan University Press,2005:353 (郑子樵.材料科学基础.长沙:中南大学出版社,2005:353)
[18]Morinage T,Translated by Jin X Z.Copper and Copper Alloy.Beijing:National Defence Industry Press,1963 (森永卓一著,金宪真译.铜及铜合金.北京:国防工业出版社,1963:77)
[1] 钟茜婷, 王磊, 刘峰. Incoloy 028合金不连续动态再结晶中链状组织形成机理研究[J]. 金属学报, 2018, 54(7): 969-980.
[2] 王建国,刘东,杨艳慧. GH4169合金非均匀组织在加热过程中的演化机理*[J]. 金属学报, 2016, 52(6): 707-716.
[3] 谭喜鹏,刘金来,宋小平,金涛,孙晓峰,胡壮麒. 一种含Ru镍基单晶高温合金的组织特征[J]. 金属学报, 2012, 48(5): 569-574.
[4] 陈志永 唐林 詹从堃 杨续跃. 取样方向对冷轧Cu板动态强迫剪切变形行为的影响[J]. 金属学报, 2012, 48(3): 315-320.
[5] 高英俊 罗志荣 黄礼琳 胡项英. 变形合金的亚晶组织演化的相场模型[J]. 金属学报, 2012, 48(10): 1215-1222.
[6] 杨涛 陈铮 董卫平. 应力诱发双位错组亚晶界湮没的晶体相场模拟[J]. 金属学报, 2011, 47(10): 1301-1306.
[7] 田素贵; 于宏; 张禄廷; 洪鹤; 徐永波; 胡壮麒 . 一种变形低碳锰硼钢中条带状亚结构的组织演化[J]. 金属学报, 2003, 39(8): 826-830 .
[8] 沈健; 唐京辉 . Al-Zn-Mg合金的热变形组织演化[J]. 金属学报, 2000, 36(10): 1033-1036 .
[9] V.E.Panin. 固体范性形变与断裂的介观力学物理原理(英文)[J]. 金属学报, 1997, 33(2): 187-197.
[10] 张俊善;曹智本. Ni-20Cr合金高温蠕变行为与位错亚结构的关系[J]. 金属学报, 1988, 24(2): 111-118.