Please wait a minute...
金属学报  1994, Vol. 30 Issue (19): 323-326    
  论文 本期目录 | 过刊浏览 |
离子束辅助沉积TiN膜的摩擦学特性
刘捍卫;陈元儒;张绪寿
西南交通大学;中国科学院兰州化学物理研究所固体润滑开放实验室
TRIBOLOGICAL PROPERTIES OF TiN FILM BY ION BEAM ASSISTED DEPOSITION
LIU Hanwei;CHEN Yuanru (Southwest Jiaotong University; Chengdu)ZHANG Xushou (Laboratory of Solid Lubrication; Lanzhou institute of Chemical Physics;Chinese Academy of Sciences; Lanzhou)
引用本文:

刘捍卫;陈元儒;张绪寿. 离子束辅助沉积TiN膜的摩擦学特性[J]. 金属学报, 1994, 30(19): 323-326.
, , . TRIBOLOGICAL PROPERTIES OF TiN FILM BY ION BEAM ASSISTED DEPOSITION[J]. Acta Metall Sin, 1994, 30(19): 323-326.

全文: PDF(300 KB)  
摘要: 用XPS,AES和XRD分析厚约2μm离子束辅助沉积TiN膜的成分和结构.实验表明:膜的表面成分主要是TiO_2,膜内是轻微择优取向晶粒较细的TiN.膜与衬底的界面存在混合区,用阶梯加载法测定润滑条件下GCr15钢与TiN膜对磨时的临界载荷-速度关系.试验发现TiN膜可显著扩大边界润滑区,承受较大载荷而不致发生擦伤.
关键词 : 离子束辅助沉积,  TiN膜,  滑动摩擦    
Abstract:XPS, AES and XRD show that the main composition of TiN film prepared by ion beam assisted deposition is TiN with fine grain size and slightly preferential orientation,except predominent TiO_2 on surface of film and a wide mixed region of Ti, Fe, N at interface between film and substrate. The tribological behaviour of the TiN film was tested on a ball/disc frictional device under stepwise loading and lubricating sliding. From P-v diagram, the enlargement of boundary lubrication region has been found. It seems that the existence of TiN film increases the load carrying capacity of substrate of Cr12MoV steel.
Key words: ion beam assisted deposition    TiN film    sliding friction
    
1KantRA,SartwellBD.MaterSciEng,1987;90:3572ItoH,YoshidaY,YamajS,MaeyamaY,InaT,MinowaY.NuclInstrtumMethodsPhysRes,1989;B39:1743SmidtFA.IntMaterRev,1990;35:614LiuXianghua,XueBin,ZhengZhihong,ZhouZuyao,ZouShichang.NuclInstrumMethPhysRes,1989;B39:1855刘捍卫.西南交通大学硕士学位论文,1992
[1] 杨继兰, 蒋元凯, 顾剑锋, 郭正洪, 陈海龑. 奥氏体化温度对中碳淬火-配分钢干滑动摩擦磨损性能的影响[J]. 金属学报, 2018, 54(1): 21-30.
[2] 覃明; 嵇宁 . TiN 附着膜的应力-应变关系[J]. 金属学报, 2003, 39(7): 721-724 .
[3] 谢飞; 何家文 . 高速钢W18Cr4V离子渗氮层组织对TiN膜与基体结合强度的影响[J]. 金属学报, 2000, 36(10): 1099-1103 .
[4] 董祥林; 简小刚; 毕红运; 陈金荣 . 磁场对中碳钢滑动摩擦磨损的影响[J]. 金属学报, 1999, 35(6): 577-580 .
[5] 于力;刘技文;赵杰;戴少侠;金柱京;王慧君. 基材温度对离子镀TiN膜性能的影响[J]. 金属学报, 1996, 32(12): 1270-1274.
[6] 朱宏;柳襄怀;任琮欣;陈国梁;邹世昌. 单源低能离子束辅助沉积类金刚石薄膜结构及性能研究[J]. 金属学报, 1995, 31(15): 139-144.
[7] 江海;武庆兰;陶琨;李恒德. 离子束辅助沉积Fe-N薄膜的相形成[J]. 金属学报, 1994, 30(18): 273-276.
[8] 江海;陶琨;李恒德. 离子束辅助沉积合成B—N薄膜的分析[J]. 金属学报, 1993, 29(4): 77-80.
[9] 赵程;彭红瑞;李世直. 等离子体化学气相沉积Ti-N-C膜的研究[J]. 金属学报, 1993, 29(1): 87-92.
[10] 李世直;徐翔. 等离子体化学气相沉积TiN膜的研究[J]. 金属学报, 1988, 24(3): 229-235.