Please wait a minute...
金属学报  1994, Vol. 30 Issue (10): 469-476    
  论文 本期目录 | 过刊浏览 |
(F+M+A)三相钢低周疲劳的扫描电镜动态研究
胡志忠;马明亮;刘彦庆;刘静华
西安交通大学;西安交通大学材料科学工程系
IN SITU OBSERVATION ON LOW CYCLIC FATIGUE IN TRIPHASE STEEL UNDER SEM
HU Zhizhong; MA Mingriang; LIU Yanqing; LIU Jinghua (Xi′an Jiaotong University)(Manuscript received 22 December; 1993; in revised form 1 June; 1994)
引用本文:

胡志忠;马明亮;刘彦庆;刘静华. (F+M+A)三相钢低周疲劳的扫描电镜动态研究[J]. 金属学报, 1994, 30(10): 469-476.
, , , . IN SITU OBSERVATION ON LOW CYCLIC FATIGUE IN TRIPHASE STEEL UNDER SEM[J]. Acta Metall Sin, 1994, 30(10): 469-476.

全文: PDF(695 KB)  
摘要: 用扫描电子显微镜疲劳加载台进行动态原位观察,研究了奥氏体(A)在(F+M+A)三相钢低周疲劳裂纹萌生和扩展过程中的作用.结果表明,在低周疲劳裂纹的萌生和早期扩展阶段,三相钢中的奥氏体会降低疲劳缺口敏感性,延长裂纹萌生期,使裂纹路径弯折并降低扩展速率.在高应变疲劳阶段,因奥氏体应变诱发相变生成马氏体,其边界是裂纹扩展的低能通道,从而加速裂纹的扩展.并提出了一个能量判据:当裂尖扩展功小于A→M转变的能量时,奥氏体会提高材料的疲劳抗力,反之奥氏体会加速疲劳裂纹的萌生和扩展.
关键词 三相钢低周疲劳断裂应变诱发相变疲劳裂纹扩展动态原位观察    
Abstract:The behaviour of austenite in the crack initiation and propagation of low cyclic fatigue for triphase steel (F-M-A) was observed in situ under SEM with fatigue loading stage. Results showed that the austenite in triphase steel during the crack initiation and early propasation of low cyclic fatigue may decrease the fatigue notch sensitivity and prolong the cyclic number of fatigue crack initiation, so as to flex the propagation path and to reduce the propagation rate of the cracks. At high strain fatigue stage, the strain-induced transformation of austenite may form the martensite, of which has the boundaries of low energy path for cracks propagation, the cracks may propagate more rapidly. Furthermore, an energy criterion was proposed, i, e., when the propagation work at crack tip is less than energy transformed from austenite into martensite, the fatigue resistance of steel may be improved by austenite, on the contrary, the crack initiation and propagation accelerated.Correspondent: HU Zhichong, senior engineer, Department of Materials Science and Engineering, Xi′an Jiaotong University, Xi′an 710049
Key words triphase steel    low cyclic fatigue fracture    strain-induced transformation    fatigue crack propagation    in situ observation
收稿日期: 1994-10-18     
1MocarskiS.MetalProgress,1970,98(3):962高惠临,谈育煦,王笑天.金属学报,1988;24:A173刘静华,刘彦庆,马新沛,孙颖.中国机械工程学会热处理学会第五届年会论文集,1981:114刘静华,刘彦庆,柴东朗.陕西冶金,1991;2:185马明亮.西安交通大学硕士论文,1991
[1] 江河, 佴启亮, 徐超, 赵晓, 姚志浩, 董建新. 镍基高温合金疲劳裂纹急速扩展敏感温度及成因[J]. 金属学报, 2023, 59(9): 1190-1200.
[2] 戚钊, 王斌, 张鹏, 刘睿, 张振军, 张哲峰. 应力比对含缺陷选区激光熔化TC4合金稳态疲劳裂纹扩展速率的影响[J]. 金属学报, 2023, 59(10): 1411-1418.
[3] 周红伟, 白凤梅, 杨磊, 陈艳, 方俊飞, 张立强, 衣海龙, 何宜柱. 1100 MPa级高强钢的低周疲劳行为[J]. 金属学报, 2020, 56(7): 937-948.
[4] 张啸尘, 孟维迎, 邹德芳, 周鹏, 石怀涛. 预循环应力对高速列车关键结构用铝合金材料疲劳裂纹扩展行为的影响[J]. 金属学报, 2019, 55(10): 1243-1250.
[5] 徐超, 佴启亮, 姚志浩, 江河, 董建新. 晶界氧化对GH4738高温合金疲劳裂纹扩展的作用[J]. 金属学报, 2017, 53(11): 1453-1460.
[6] 杨健,董建新,张麦仓,贾建,陶宇. 新型镍基粉末高温合金FGH98的高温疲劳裂纹扩展行为研究[J]. 金属学报, 2013, 49(1): 71-80.
[7] 熊缨 陈冰冰 郑三龙 高增梁. 16MnR钢在不同条件下的疲劳裂纹扩展规律[J]. 金属学报, 2009, 45(7): 849-855.
[8] 马英杰; 刘建荣; 雷家峰; 李玉兰; 刘羽寅; 杨锐 . 钛合金疲劳裂纹扩展速率Paris区中的转折点[J]. 金属学报, 2008, 44(8): 973-978 .
[9] 熊缨 . 疲劳裂纹扩展两参量驱动力的一个新模型[J]. 金属学报, 2008, 44(11): 1348-1353 .
[10] 于慧臣; 孙燕国; 张岩基; 谢世殊; 田中启介 . 不锈钢在扭转/拉伸复合载荷下近门槛值的疲劳裂纹扩展行为[J]. 金属学报, 2006, 42(2): 186-190 .
[11] 于慧臣; 张岩基; 孙燕国; 谢世殊; 田中启介 . 不锈钢在循环扭转载荷下近门槛值的疲劳裂纹扩展行为[J]. 金属学报, 2005, 41(7): 721-726 .
[12] 钟勇; 肖福仁; 单以银; 杨柯 . 管线钢的疲劳裂纹扩展速率与疲劳寿命关系的研究[J]. 金属学报, 2005, 41(5): 523-528 .
[13] 王章忠; 杜百平; 李年 . 不同类型过载下I型疲劳裂纹的扩展行为[J]. 金属学报, 2003, 39(8): 843-847 .
[14] 关辉; 李劲; 魏学军; 韩恩厚; 柯伟 . 环境对AISI 321不锈钢疲劳裂纹扩展过载效应的影响[J]. 金属学报, 2003, 39(6): 613-616 .
[15] 江峰; 康伟; 赵康; 孙军; 何家文 . 强度错配双层金属板垂直界面裂纹疲劳扩展行为[J]. 金属学报, 2001, 37(10): 1053-1058 .