金属学报  1987, Vol. 23 Issue (5): 408-412

论文 本期目录 | 过刊浏览 |

析出强化奥氏体钢的室温断裂行为

谢长生;崔崑

华中工学院;华中工学院

FRACTURE BEHAVIOUR OF PRECIPITATION HARDENED AUSTENITIC STEEL

by XIE Changsheng; CUI Kun (Huazhong University of Science and Technology; Wuhan)(Manuscript receivod 29 March; 1986; revised manuscript 11 July; 1986)

谢长生;崔崑. 析出强化奥氏体钢的室温断裂行为[J]. 金属学报, 1987, 23(5): 408-412.
, . FRACTURE BEHAVIOUR OF PRECIPITATION HARDENED AUSTENITIC STEEL[J]. Acta Metall Sin, 1987, 23(5): 408-412.

摘要 参考文献 相关文章 Metrics 全文: PDF(378 KB)   摘要: 本文研究了显微组织对一种析出强化奥氏体钢室温断裂行为的影响,结果表明,在相同的时效条件下,当固溶温度≤1100℃时,断口呈穿晶韧断;当固溶温度>1100℃时,断口呈沿晶断裂.最后,讨论了穿晶韧断和沿晶断裂的原因。 Abstract：The effect of microstructure on the room temperature fracture behaviour of a precipitation hardened austenitic steel has been investigated. Under the same aging conditions, the dimple or intergranular fracture is shown when the solution temperature is not higher than or above 1100℃ respectively. On this basis, the intracrystalline and intergranular fracture models were discussed separately. 收稿日期: 1987-05-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 谢长生 崔崑 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1987/V23/I5/408 1 谢长生,何向山,崔崑.第二相在A氏体热作工具钢中的析出,全国高温材料第二届年会论文,1984 2 Parker TD, In: Bradley E F ed., Source Book in Materials for Elevated Temperature Applications, Metals Park, Ohio: ASM, 1979: 188 3 田中照夫,饭泉省三,衣笠雅晋,藤罔外喜夫.铁钢,1977;63(5) :748 4 Braint C L, Banerji SK. Int Metall Rev, 1978; 23: 164 5 谢长生.华中工学院金属材料及热处理专业博士论文,1985 6 Kawabata T, Izumi O. Acta Metall, 1976; 24: 817 7 Kalish D, In: Decker R F ed., Source Book in Maraging Steels, Metals Park, Ohio: ASM, 1979: 33 No related articles found! Viewed Full text Abstract Cited   Shared      Discussed