金属学报  1983, Vol. 19 Issue (6): 36-44

论文 本期目录 | 过刊浏览 |

热轧组织和织构对3%和4%Si-Fe合金冷加工性能的影响

吕其春;张文润;帅仁杰;李俊义

冶金工业部钢铁研究总院;冶金工业部钢铁研究总院;冶金工业部钢铁研究总院;冶金工业部钢铁研究总院

EFFECT OF STRUCTURE AND TEXTURE ON COLD WORKABILITY OF 3%-AND 4%Si-Fe ALLOYS

LU Qichun; ZHANG Wenrun; SHUAI Renjie; LI Junyi (Central Iron and Steel Research Institute; Ministry of Metallurgical Industry; Beijing)

吕其春;张文润;帅仁杰;李俊义. 热轧组织和织构对3%和4%Si-Fe合金冷加工性能的影响[J]. 金属学报, 1983, 19(6): 36-44.
, , , . EFFECT OF STRUCTURE AND TEXTURE ON COLD WORKABILITY OF 3%-AND 4%Si-Fe ALLOYS[J]. Acta Metall Sin, 1983, 19(6): 36-44.

摘要 参考文献 相关文章 Metrics 全文: PDF(2810 KB)   摘要: 采用冷轧和冷弯试验方法研究了热轧显微组织和织构成分对3％和4％Si-Fe合金的冷加工性能的影响。结果表明,细化热轧板的晶粒、改进热轧板组织的均匀性可以提高热轧板的冷轧和反复弯曲性能。特定位向单晶体的冷轧试验结果指出,在热轧板的主要织构组分中,增强{112} <110>和{111} <112>成分同样有助于改善冷轧塑性。 Abstract：The effect of the hot-rolling microstructure and texture on the cold workability of 3%-and 4%Si-Fe alloys has been studied by the cold-rolling and bending tests. The plasticity of the hot-rolled plate would be better by making the grains fine and improving the homogeneity in the hot-rolled structure. The cold-rolling test of the single crystal with specific orientation shows that it is benefited in the ductility of cold-rolling by increasing {112} <110> and {111} <112> among the main hotrolled texture. 收稿日期: 1983-06-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 吕其春 张文润 帅仁杰 李俊义 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1983/V19/I6/36 1 Arai, K.I. Tsuya, N.; Ohmori, K.; Shimanaka, H.; Miyazaki, T., J. Magn Magn Mater, 15-18 (1980) , 1425． 2 Narita, K.; Teshima, N.; Agano, T.; Funahashi, H., IEEE Trans. Magn., MAG-16 (1980) , 517． 3 Fiedler, H.C., J. Iron Steer Inst., 205 (1967) , 158． 4 Burr, D.J.; Butt, R.J.; Wakeman, D.W., J. Iron Steer Inst., 203 (1965) , 500． 5 #12 6 #12 7 Clark, C.A.; Mason, J.J., Patent Specification, №982 101, 1965． (England). 8 Clark, C.A.; Mason, J.J.; Mee, P.B., Proc. IEE, 113 (1966) , №2, 345． 9 吕其春;张文润;李军;李俊义,冶金因素对高硅硅钢冷加工性能的影响,待发表. 10 Lu Qichun; Shuai Renjie; Zhou Xiuyuan, Proc. of the 6th Int. Conf. on Textures of Materials, Vol. 2, 1981, Tokyo, Ed. Nagashima, S.I., Publ. Iron and Steel Inst. Jpn, p.958-966． No related articles found! Viewed Full text Abstract Cited   Shared      Discussed