Please wait a minute...
金属学报  1982, Vol. 18 Issue (3): 264-271    
  论文 本期目录 | 过刊浏览 |
Ti-6Al-4V合金的热盐应力腐蚀
虞炳西;张绥生;万晓景
中国科学院金属研究所;中国科学院金属研究所;中国科学院金属研究所
HOT SALT STRESS CORROSION CRACKING OF TITANIUM ALLOY Ti-6A1-4V
Yu Bingxi; Zhang Suisheng and Wan Xiaojing (Institute of Metal Research; Academia Sinica; Shenyang)
引用本文:

虞炳西;张绥生;万晓景. Ti-6Al-4V合金的热盐应力腐蚀[J]. 金属学报, 1982, 18(3): 264-271.
, , . HOT SALT STRESS CORROSION CRACKING OF TITANIUM ALLOY Ti-6A1-4V[J]. Acta Metall Sin, 1982, 18(3): 264-271.

全文: PDF(1831 KB)  
摘要: 在实验室条件下研究了Ti-6Al-4V合金热盐应力腐蚀。实验表明在300—420℃温度范围内静态热盐应力腐蚀临界应力低于同温度的蠕变强度。实验还表明,经热盐应力暴露后试样的塑性对形变速度很敏感。用离子探针分析断口微区氢浓度的结果表明,氢在试样表面和断口处有明显的富集,因而可以认为钛合金热盐应力腐蚀的脆化是通过盐对试样的腐蚀而生成的氢所引起的。
Abstract:Experiments were carried out on the hot salt stress corrosion cracking (HSSCC) of titanium alloy Ti-6Al-4V. The steady-state threshold stress for HSSCC in the temperature range of 300—420℃ was found to be lower than their creep strength at the same temperature. The post-exposure ductility of the specimens after HSSCC is susceptible to the strain rate. By ion microproble analysis, results show that hydrogen is markedly concentrated along the fractographic surface. It seems that the hydrogen produced halide salt corrosion and subsequently absorbed by the titanium alloy is responsible for cracking.
收稿日期: 1982-03-18     
1 Petersen, V. C., J. Met., 23 (1971) , No. 4, 40.
2 Ondrejcin, R. S., Metall. Trans., 1 (1970) , 3031,
3 Mahoney, M. W. and Paton, N. E., Corrosion, 28 (1972) , 374.
4 Myers, J. R. and Hall, J. A., ibid., 33 (1977) , 253.
5 Ondrejcin, R. S., NASA CR-1829, 1971.
6 Gray, H. R., Met, Eng. Q., 12 (1972) , No. 4, 10.
7 抚顺钢厂,北京有色金属研究院,未发表资料.
8 Aerospace Structural Metals Handbook, Vol. Ⅱ, 1970, Code 3707, p. 25.
9 万晓景,材料保护,(1979) №.2-3. 11.
10 Gray, H. R., NASA TN D-6188, 1971.
11 Mahoney, M. W. and Tetelman, A. S., Metall. Trans., 7A (1976) , 1549.
No related articles found!