Please wait a minute...
金属学报  1982, Vol. 18 Issue (3): 272-387    
  论文 本期目录 | 过刊浏览 |
α-Ti的形变和断裂过程中的声发射
朱祖铭;穆在勤;王双全;杨淑华;尹花子
中国科学院金属研究所;中国科学院金属研究所;中国科学院金属研究所;中国科学院金属研究所;中国科学院金属研究所
ACOUSTIC EMISSION DURING PLASTIC DEFORMATION AND MICROCRACKING PROCESS OF α-Ti
Zhu Zuming; Mu Zaiqin; Wang Shuangquan; Yang Shuhua; Yin Huazi (Institute of Metal Research; Academia Sinica; Shenyang)
引用本文:

朱祖铭;穆在勤;王双全;杨淑华;尹花子. α-Ti的形变和断裂过程中的声发射[J]. 金属学报, 1982, 18(3): 272-387.
, , , , . ACOUSTIC EMISSION DURING PLASTIC DEFORMATION AND MICROCRACKING PROCESS OF α-Ti[J]. Acta Metall Sin, 1982, 18(3): 272-387.

全文: PDF(1930 KB)  
摘要: 本文采用声发射能量技术研究低强度、高塑性材料α-Ti的形变、断裂特征。发现声发射总能量ΣE与长程应力场σ-σs间存在lgΣE-lg(σ-σs)的线性关系,曲线的拐点即为开裂点。因而有可能利用这种方法较精确地测定出低强度、高塑性材料的开裂点,为这类材料的断裂力学测试解决了一个难题。 α-Ti的形变、断裂过程中存在两种声发射源:位错运动引起的滑移和裂纹的徽开裂和长大。
Abstract:Using the technique of acoustic emission energy, the deformation and fracture in low strength and high plastic α-Ti has been studied. The logarithm of total acoustic emission energy is proportional to the logarithm of long range stress, and its turning point corresponds to the point of cracking. Therefore, it seems to be available to determine accurately the state of the cracking tip of these low strength and high plastic alloys by the method.Two kinds of acoustic emission sources were found during the plastic deformation and fracture process of α-Ti: the dislocation movement and the microcracking and growth of a crack.
收稿日期: 1982-03-18     
1 Dunegan, H. L.; Harris, D. O.; Tatro, C. A., Eng. Fract. Mech., 1 (1968) . 105.
2 Clark, G.; Knott, J. F., Met. Sci., 11 (1977) , 531.
3 Clark, G., Ninth World Conference on Non-Destructive Testing, Vol.3, 1979, Melbourne, p. 4JDD-2.
4 Tetelman, A. S.; Chow, R., Am. Soc. Test. Mater, Spec. Tech. Publ., No505, 1972. p.30.
5 Harris, D. O., Bell, R. L., Exp. Mech., 17 (1977) , 347.
6 待发表.e
No related articles found!