金属学报  2007, Vol. 43 Issue (8): 807-812

论文 本期目录 | 过刊浏览 |

深冷处理和温度对Fe-Mn合金阻尼性能的影响

黄姝珂;李 宁;文玉华;丁 胜;滕 劲;胥永刚

四川大学制造科学与工程学院

Effect of deep-cooling and measurement temperature on damping capacity of Fe-Mn alloy

Shu-Ke Huang;LI Ning;;;

四川大学制造科学与工程学院

黄姝珂; 李宁; 文玉华; 丁胜; 滕劲; 胥永刚 . 深冷处理和温度对Fe-Mn合金阻尼性能的影响[J]. 金属学报, 2007, 43(8): 807-812 .
, , , , , . Effect of deep-cooling and measurement temperature on damping capacity of Fe-Mn alloy[J]. Acta Metall Sin, 2007, 43(8): 807-812 .

摘要 参考文献 相关文章 Metrics 全文: PDF(629 KB)   摘要: 通过测定Fe-Mn合金的层错几率以及借助G-L位错脱钉模型, 研究了深冷处理和温度对其阻尼性能的影响, 进一步揭示了Fe-Mn合金的高阻尼机制. 采用倒扭摆测试合金的阻尼性能、SEM观察显微组织、XRD测定物相体积分数和层错几率. 结果表明, Fe-Mn合金的高阻尼机制与Shockley不全位错的脱钉运动相关;深冷处理增加了合金的层错几率, 即增加了Shockley不全位错数量, 阻尼性能得到提高; 升高温度降低了Shockley不全位错的脱钉力, 在一定应变振幅下,温度越高可以产生脱钉的Shockley不全位错数量就越多, 合金的阻尼性能升高. 关键词 ： 阻尼合金,  Fe-Mn合金,  Shockley不全位错     Abstract：In order to disclosure the high damping mechanism of Fe-Mn alloy, the effect of deep-cooling and measurement temperature on damping capacity was studied, by measuring stacking fault probability and using G-L dislocation model. The damping capacity was measured using reversal torsion pendulum. The stacking fault probability and volume fraction of ε-martensite were determined using XRD. The microstructure was observed using SEM. The results indicated that the high damping mechanism was determined by the movement of Shockley partial dislocation, and not by ε-martensite. Because Deep-cooling increased the stacking fault probability in γ-austenite and ε-martensite, the number of Shockley partial dislocations also increased and the damping capacity of Fe-Mn alloy was improved. Higher temperature could decrease the unpinning stress between Shockley partial dislocation and weak pinning points. At a certain strain amplitude, therefore, with the temperature increased, the number of unpinning Shockley partial dislocations was more and the damping capacity of Fe-Mn alloy was improved. Key words： damping alloy    Fe-Mn    Shockley partial dislocation    stacking fault probability    deep-cooling 收稿日期: 2006-12-04      ZTFLH:  TG135.7   服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 黄姝珂 李宁 文玉华 丁胜 滕劲 胥永刚 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y2007/V43/I8/807 [1]Pulino-Sagradi D,Sagradi M, Karimi A,Martin J L.Scr Mater,1998;39:131 [2]Wu S K,Lin H C.J Alloy Compd,2003;355:72 [3]Liu Y C,Yang G C,Lu L L,Yang L S.J Mater Process ??Technol,1999;87:53 [4]G(?)ken J,Riehemann W.Mater Sci Eng,2004;A370:417 [5]Balk S H.Nucl Eng Des,2000;198:241 [6]De A K,Cabanas N,de Cooman B C.Z Metallkd,2002; 93:228 [7]Wu X C,Zhang J H,Xu Z Y.J Shanghai Jiaotong Univ, 1998;32(2):1 (吴晓春，张骥华，徐祖耀．上海交通大学学报，1998；32(2)：1) [8]Jun J H,Choi C S.Mater Sci Eng,1998;A252:133 [9]Huang S K,Li N,Wen Y H,Ding S,Teng J.J Sichuan Univ(Eng Sci Ed),2007;39:123 (黄姝珂，李宁，文玉华，丁胜，滕劲．四川大学学报(工程科学版)，2007；39：123) [10]Lee Y K,Jun J H,Choi C S.ISIJ Int,1997;37:1023 [11]GB/T 13665-1992.Test Method for Damping Capacity of Metallic Damping Materials-Torsion Pendulum Method and Flexural Resonance Method.Beijing:Standards Press of China,1992 (GB/T 13665-1992．金属阻尼材料阻尼本领试验方法—扭摆法和弯曲共振法．北京：中国标准出版社，1992) [12]Lee Y K,Baik S H,Kim J C,Choi C S.J Alloy Compd, 2003;355:10 [13]Warren B E.X-ray Diffraction.Reading,Mass:Addison- Wesley,1969:275 [14]Ramous E.Z Metallkd,1974;65:515 [15]He G,Zhao H B,Rong Y H,Guo Z H,Chen S P,Xu Z Y.J Shanghai Jiaotong Univ,1999;33:765 (何刚，赵恒北，戎咏华．郭正洪，陈世朴，徐祖耀．上海交通大学学报，1999；33：765) [16]Granato A,L(?)cke K.J Appl Phys,1956;27:583 [17]Teutonico L J,Granato A V,L(?)cke K.J Appl Phys,1964; 35:220 [18]Lee Y K,Jun J H,Choi C S.Ser Mater,1996;35:825 [19]Wen Y H,Li N,Tu M J.J Mater Sci Technol,2000;16: 424 [20]Lücke K Granato A V,Teutonico L J.J Appl Phys,1968; 39:5181 [1] 王世宏, 李健, 柴锋, 罗小兵, 杨才福, 苏航. 固溶温度对Fe-19Mn合金的γ→ε相变和阻尼性能的影响[J]. 金属学报, 2020, 56(9): 1217-1226. [2] 黄姝珂 刘建辉 李昌安 周丹晨 李宁 文玉华. 预变形对Fe-Mn合金层错几率和阻尼性能的影响[J]. 金属学报, 2009, 45(8): 937-942. [3] 许云伟; 马天宇; 张晶晶; 严密 . 反铁磁Fe1-xMnx(0.30≤x≥0.55) 合金的磁致伸缩[J]. 金属学报, 2008, 44(10): 1235-1237 . [4] 殷福星 . 实用M2052合金阻尼行为表征[J]. 金属学报, 2003, 39(11): 1139-1144 . Viewed Full text Abstract Cited   Shared      Discussed