INTERNAL FRICTION PEAK IN B2 Fe--Al ALLOYS DURING ORDERING PROCESS

Acta Metall Sin

2009, Vol. 45

Issue (4): 396-399 DOI:

论文

Current Issue | Archive | Adv Search

INTERNAL FRICTION PEAK IN B2 Fe--Al ALLOYS DURING ORDERING PROCESS

WU Jie¹; CUI Hongzhi¹; CHI Jing¹; YAO Shuyu¹; HAN Fusheng²

1.College of Materials Science and Engineering; Shandong University of Science and Technology; Qingdao 266510
2.Key Laboratory of Materials Physics; Institute of Solid State Physics; Chinese Academy of Sciences; Hefei 230031

Cite this article:

WU Jie CUI Hongzhi CHI Jing YAO Shuyu HAN Fusheng. INTERNAL FRICTION PEAK IN B2 Fe--Al ALLOYS DURING ORDERING PROCESS. Acta Metall Sin, 2009, 45(4): 396-399.

Download:

PDF(537KB)
Export: BibTeX | EndNote (RIS)

Abstract

The internal friction behaviors of B2 Fe--Al alloys were examined to understand the correlation between the ordering process and the atomic movement. An internal friction peak was found at around 570 ℃ in the oil--cooled Fe₄₇Al₅₃alloy, while the peak in the furnace--cooled specimens disappeared. The peak has the typical phase transition character. Combined with analyses of XRD and DSC, it is proposed that the peak originates from the ordering process, which is caused by the jump of antisite atoms to their own sublattice sites through the nearest neighboring vacancies. Similar internal peak was observed also at 540℃ for Fe₅₇Al₄₃ alloy.

Key words: B2 Fe--Al alloy internal friction degree of order antisite atom

Received: 21 October 2008

ZTFLH:	TG113.22
	O77

Fund:

Supported by High Technology Research and Development Program of China (No.2006AA06Z381) and Research Project of SUST Spring Bud (No.2008AZZ082)

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	WU Jie
	CUI Hong-Zhi
	CHI Jing
	YAO Shu-Yu
	HAN Fu-Sheng

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y2009/V45/I4/396

[1] Haraguchi T, Yoshimi K, Yoo M H. Acta Mater, 2005; 53:3751
[2] Lang H, Rohrhofer K, Rosenkranz P. Intermetallics, 2002; 10: 283
[3] Api˜naniz E, Plazaola F, Garitaonandia J S. J Magn Magn Mater, 2004; 272–276: 794
[4] Ni X D, Wang X T, Chen G L. Intermetallics, 1999; 7: 855
[5] Chen G L, Ni X D, Nsongo T. Intermetallics, 2004; 12: 733
[6] Morris D G, Gunther S. Acta Mater, 1996; 44: 2847
[7] Han F S, Zhu Z G, Gao J C. Metall Mater Trans, 1999; 30A: 771
[8] Sun W, Wu J, Han F S. Acta Metall Sin, 2007; 43: 311
(孙蔚, 吴杰, 韩福生. 金属学报, 2007; 43: 311)
[9] Wang Q Z, Han F S, Wang Q. Phys Status Solidi, 2004;201A: 2910
[10] Kubaschewski O. Iron–Binary Phase Diagrams. Berlin:Springer–Verlag, 1982: 1
[11] Liubich V, Dorfman S, Fuks D, Mehrer H. Mater Trans JIM, 1999; 40: 132
[12] Pfeiler W, Spruˇsil B. Mater Sci Eng, 2002; A324: 34
[13] Kogachi M, Haraguchi T, Kim S M. Intermetallics, 1998; 6: 499
[14] Kogachi M, Haraguchi T. Scr Mater, 1998; 39: 159
[15] Fu C L, Wang X D. Mater Sci Eng, 1997; A239–240: 761
[16] Fu C L. Phys Rev, 1995; 52B: 3151
[17] Kissinger H E. Analy Chem, 1957; 29: 1702
[18] Belova I V, Murch G E. Intermetallics, 1998; 6: 115
[19] Zaroual S, Sassi O, Aride J, Bernardini J, Moya G. Mater Sci Eng, 2000; A279: 282

[1]	LI Weijuan, ZHANG Hengyi, FU Hao, ZHANG Jianping, QI Xiangyu. INTERNAL FRICTION STUDY OF MECHANISM OF BAKE-HARDENING ON LOW CARBON STEEL[J]. 金属学报, 2015, 51(4): 385-392.
[2]	WANG Hua SHI Wen HE Yanlin FU Renyu LI Lin. STUDY OF Mn AND P SOLUTE DISTRIBUTIONS AND THEIR EFFECT ON THE TENSILE BEHAVIOR IN ULTRA LOW CARBON BAKE HARDENING STEELS[J]. 金属学报, 2011, 47(3): 263-268.
[3]	Jian ZHANG. EFFECTS OF GRAIN-BOUNDARY PHASES ON HYDROGEN EMBRITTLEMENT OF FE-NI-CR AUSTENITIC ALLOY BY INTERNAL FRICTION[J]. 金属学报, 2008, 44(9): 1095-1098 .
[4]	SUN Wei. The internal friction peak correlated to the relaxation of Al antisite atoms in Fe-Al alloys[J]. 金属学报, 2007, 43(3): 311-314 .
[5]	WANG Hongbin; WANG Xiaoyu; ZHANG Jihua; XU Zuyao T. Y. Hsu. Internal Friction of Nano--Grained Fe--25\%Ni Alloy Bulk[J]. 金属学报, 2004, 40(5): 523-526 .
[6]	CHE Yunyi; LIU Fendi; ZENG Guiyi; XU Yuchang; JI Jingwen (College of Sciences; Northeastern Univerisity; Shenyang 110006)HUA Qiaozhu; LIU Jianmin; HUANG Zhenru(Institute of Iron & Steel; Baoshan Iron & Steel Company; Shanghai 201900)Correspondent: JI Jingwen; professor; Tel: (024)25915148; Fax: (024)23891072;E-mail: cos ramm. cneu. edu. cn.. Snoek-K■-kster DAMPING IN 340 MPa BAKE HARDENING STEELS[J]. 金属学报, 1998, 34(8): 831-835.
[7]	WANG Weiguo; ZHOU Bangxin; ZHENG Zhongmin(Laboratory for Nuclear Fuel and Materials; Nuclear Power Institute of China; Chengdu 610041)Correspondent: WANG Weiguo; Tel: (028)5582199-88531. DAMPING CAPACITY OF Fe-Cr-Al-Si ALLOYS[J]. 金属学报, 1998, 34(10): 1039-1042.
[8]	YUAN Lixi; FANG Qianfeng(Laboratory of Internal Fricion and Defects in Solids;Institute of Solid State Physics; The Chinese Academy of Sciences; Hefei 230031) Correspondents: FANG Qianfeng;professor;E-mail:qffang@issp.hfcas.ac.cn. NONLINEAR FITTING OF THE INTERNAL FRICTION DATA AND ITS APPLICATION ON THE BAMBOO GRAIN BOUNDARY RELAXATION IN PURE Al[J]. 金属学报, 1998, 34(10): 1016-1020.
[9]	GE Tingsui (T S. KE); (Laboratory of Internal Friction and Defects in Solinds; Institute of Solid State Physics; Chinese Academy of Sciences; Hefei 230031). EXPERIMENTAL AND THEORETICAL STUDY ON NON-LINEAR ANELASTIC INTERNAL FRICTION[J]. 金属学报, 1997, 33(1): 9-21.
[10]	LIU Junmin; ZHANG Jinxiu (Zhongshan University; Guangzhou 510275)(Manuscript received 1995-08-09; in revised form 1996-04-11). BHAVIOUR OF COMPLEX ELASTIC MODULUS AND INTERNAL FRICTION DURING EUTECTOID DECOMPOSITION[J]. 金属学报, 1996, 32(8): 785-790.
[11]	LIU Junmin(Department of Physics; Zhongshan University; Guangzhou 510275);SHUI Jiapeng(Institute of Solid State Physics; Chinese Academy of Sciences; Hefei230031)(Manuscript received 1994-04-15). STRUCTURE RELAXATION OF AMORPHOUS ALLOYS[J]. 金属学报, 1995, 31(19): 318-323.
[12]	JI Jingwen;SUN Yujie;LIU Yanmei(Northeastern University; Shenyang)(Manuscript received 7 September; 1993; in revised form 10 December;1993). HIGH TEMPERATURE INTERNAL FRICTION FOR Fe-Nb-C ALLOYS[J]. 金属学报, 1994, 30(5): 210-216.
[13]	GUAN Xingsheng;GE Tingsui (T. S. Ke) Laboratory of Internal Friction and Defects in Solids; Institute of Solid State Physics; Academia Sinica; HefeiInstitute of Solid State Physics; Academia Sinica; Hefei 230031. INTERNAL FRICTION PEAK ASSOCIATED WITH GRAIN BOUNDARY IN Al BICRYSTALS[J]. 金属学报, 1993, 29(8): 1-4.
[14]	SHUI Jiapeng; CHENG Lifang; LIU Junmin; CHU Zhaoqin (Institute of Solid State Physics; Academia Sinica; Hefei). STABILITY OF NANOCRYSTALLINE Ni-P RIBBON[J]. 金属学报, 1992, 28(9): 73-76.
[15]	XIA Yuebo;ZHANG Tianyi;FEI Guangtao;ZHOU Xing State Key Laboratory for Fatigue and Failure of Materials; Institute of Metal Research; Academia Sinica; Shenyang Laboratory of Internal Friction and Defects in Solids; Institute of Solid State Physics; Academia Sinica; Hefei Correspondent associate professor; Insttitute of Metal Research; Academia Sinica; Shenyang 110015. EFFECT OF SLIP ORIENTATION ON STRESS RESPONSE, INTERNAL FRICTION AND ULTRASONIC ATTENUATION DURING CYCLIC DEFORMATION IN Al SINGLE CRYSTALS[J]. 金属学报, 1992, 28(6): 33-39.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed