FABRICATION AND PROPERTIES OF SiO2 COATING ON CARBON FIBRE

Acta Metall Sin

2007, Vol. 43

Issue (12): 1282-1286 DOI:

Research Articles

Current Issue | Archive | Adv Search

FABRICATION AND PROPERTIES OF SiO2 COATING ON CARBON FIBRE

Li Kun;;;;

中国科学院金属所

Cite this article:

Li Kun. FABRICATION AND PROPERTIES OF SiO2 COATING ON CARBON FIBRE. Acta Metall Sin, 2007, 43(12): 1282-1286 .

Download:

PDF(1227KB)
Export: BibTeX | EndNote (RIS)

Abstract A Sol-Gel method was applied to fabricate SiO2 coating on the surface of carbon fibre. By controlling the component of the Sol, the dipping speed, the heating and sintering processes, a crack-free SiO2 coating was obtained. SEM and XPS were used to characterize the structure, morphology and elemental distribution of SiO2 coating, also the interface between carbon fibre and magnesium matrix was characterized by TEM. The oxidation resistance and mechanical properties of carbon fibre with and without SiO2 coating were investigated, the results showed that SiO2 coating enhanced the oxidation resistance ability of carbon fibre, and also SiO2 coating had little influence on its mechanical properties. However, the tensile strength of coated carbon fibre had degraded to 80% after embedded in Mg matrix. Carbon fibre reinforced Mg-based (Cf/Mg) composite was fabricated by gas pressure infiltration process and the results indicated that SiO2 coating could effectively promote the wetting between the molten Mg and carbon fibre.

Key words: Sol-Gel SiO2 coating Carbon fibre Cf/Mg composite

Received: 12 February 2007

ZTFLH:

TG174.4

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	Li Kun

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y2007/V43/I12/1282

[1]Thakur S K,Dhindaw B K,Hort N,Kainer K U.Metall Mater Trans,2004;35A:1167
[2]Suraj P R.Surf Interface Anal,2001;31:692
[3]Russell-Stevens M,Todd R,Papakyriacou M.Surf Inter- face Anal,2005;37:336
[4]Amateau M F.J Compos Mater,1976;10:279
[5]Kaztman H A.J Mater Sci,1987;22:144
[6]Huang J F.The Sol-Gel Theory and Technology.Beijing: Chemical Industry Press,2005:133 (黄剑锋．溶胶-凝胶原理与技术．北京：化学工业出版社，2005：133)
[7]Baklanova N I,Zima T M,Boronin A I,Kosheev S V, Titov A T,Iseava N V,Graschenkov D V,Solntsev S S. Surf Coat Technol,2006;201:2313
[8]Gao P Z,Wang H J,Jin Z H.J Inorg Mater,2003;18: 849 (高朋召，王红洁，金志浩．无机材料学报，2003；18：849)
[9]Shojiro O,Yotaro M.d Mater Sci,1979;14:831
[10]Viala J C,Fortier P,Claveyrolas G,Vincent H,Bouix J. J Mater Sci,1991;26:4977

[1]	Chao FAN, Qing JIA, Yuyou CUI, Rui YANG. Cracking Behavior of Sol-Gel Derived YAlO₃/Ti₂AlC Composite Coatings During Drying and Pyrolysis[J]. 金属学报, 2018, 54(7): 991-998.
[2]	SHAN Linting, BA Dechun, CAO Qing, HOU Xueyan, LI Jianchang. EFFECT OF Ce-Cu CODOPING ON OPTOELECTRONIC PROPERTY OF SnO₂ FILM[J]. 金属学报, 2014, 50(1): 95-102.
[3]	PAN Xiaoming, WU Junsheng, XIAO Kui, GAO Shujun, PEI Lihong, TIAN Ran, LI Xiaogang. PREPARATION AND CHARACTERIZATION OF ANTICORROSION SELF－HEALING AND HYDROPHOBIC COATING ON ALUMINUM ALLOY[J]. 金属学报, 2013, 49(9): 1113-1120.
[4]	LI Ying MA Beiyue WANG Zhenming JIANG Maofa. PREPARATION OF Na_1.4Co₂O₄ BASED THERMOELECTRIC MATERIALS BY SOL-GEL METHOD AND CHARACTERIZATION[J]. 金属学报, 2011, 47(1): 109-114.
[5]	CAI Hui WANG Fei WANG Yaping SONG Xiaoping DING Bingjun. FABRICATION OF Cu/Si COMPOSITES ON SOL–GEL PRETREATED Si POWDERS[J]. 金属学报, 2009, 45(10): 1261-1266.
[6]	HongMing Zhou. PREPARATION OF ALUMINIUM DOPED ZINC OXIDE FILMS AND THE STUDY OF THEIR MICROSTRUCTURE, ELECTRICAL AND OPTICAL PROPERTIES[J]. 金属学报, 2006, 42(5): 505-510 .
[7]	YU Shengfu;LIU Shunhong;XIE Mingli; LI Zhiyuan (Department of Materials Science and Engineering; Huazhong University of Science and Technology; Wuhan 430074)WANG Jie(Nantong Import and Export Commodity Inspection Bureau of the P.R.C; Nantong 226005). AMORPHOUS FLUX MATERIALS FOR FLUX-CORED WIRE[J]. 金属学报, 1998, 34(1): 91-94.
[8]	FENG Yi;YING Meifang;WEI Guangxia;ZHANG Xiaojun;WANG Chengfu (Hefei Universily of Technology). RELATION BETWEEN THERMAL EXPANSION COEFFICIENTS OF C_F / Cu COMPOSITES AND DISTRIBUTION OF FIBRES[J]. 金属学报, 1994, 30(21): 432-434.
[9]	WANG Yuqing;ZHENG Jiuhong;WANG Zuoming(Institute of Metal Research; Chinese Academy of Sciences;Shenyang);ZHOU Benlian(Institute of Metal Research;Chinese Academy of Sciences;Shenyang;International Centre for Meterials Physics;Chinese Academy of Sciences;Shenyang);ZHOU Longjiang;ZHANG Fengqiu(Institute of Corrosion and Protection of Metals;Chinese Academy of Sciences;Shenyang)(Manuscript received 16 August; 1993;in revised form 27 September;1993). SiC COATED CARBON FIBRES BY SOLUTION COATING AND THEIR APPLLICATION TO PREPARING CF/Al COMPOSITES[J]. 金属学报, 1994, 30(16): 194-198.
[10]	CHEN Xinguo;SHEN Zuhong;ZHENG Guobin Institute of Metal Research; Academia Sinica; ShenyangZhejiang Institute of Metallurgy; Hangzhou 310013. IMPROVEMENT ON SiC COATED CF/Al COMPOSITES BY K_2ZrF_6 WETTING PROMOTION[J]. 金属学报, 1993, 29(8): 91-96.
[11]	SUN Shoujin;WEI Yongliang;LIU Min;LI Minjun Institute of Metal Research Academia Sinica; Shenyang research associate;Institute of Metal Research;Academia Sinica;Shenyang 110015. CHEMICAL VAPOUR GROWTH OF CARBON WHISKERS ON CARBON FIBRE[J]. 金属学报, 1993, 29(4): 62-67.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed