EFFECTS OF ELECTRIC FIELD ANNEALING ON PLASTIC STRAIN RATIO (r VALUE) OF IF STEEL SHEET

Acta Metall Sin

2006, Vol. 42

Issue (8): 827-829 DOI:

Research Articles

Current Issue | Archive | Adv Search

EFFECTS OF ELECTRIC FIELD ANNEALING ON PLASTIC STRAIN RATIO (r VALUE) OF IF STEEL SHEET

Xiang Zhao;;;

东北大学辽宁省金属材料微结构设计与控制重点实验室

Cite this article:

Xiang Zhao. EFFECTS OF ELECTRIC FIELD ANNEALING ON PLASTIC STRAIN RATIO (r VALUE) OF IF STEEL SHEET. Acta Metall Sin, 2006, 42(8): 827-829 .

Download:

PDF(465KB)
Export: BibTeX | EndNote (RIS)

Abstract Effects of electric field annealing on plastic strain ratio (r value) of IF deep drawing steel sheet were studied by mean of tensile test. The results show that electric field annealing improves the average plastic strain ratio ( value). This is due to the fact that the electric field annealing reinforces the γ-fiber texture and weakens the a-fiber texture that deteriorated the plastic strain ratio.

Key words: electric field annealing IF deep drawing steel sheet recrystallization texture plastic strain ratio

Received: 01 December 2005

ZTFLH:

TG115.2

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	Xiang Zhao

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y2006/V42/I8/827

[1]Hutchinson W B.Int Met Rev,1982;27:307
[2]Urabe T,Jonas J J.ISIJ Int,1994;34:435
[3]Ray R K,Jonas J J,Hook R E.Int Met Rev,1994;39:129
[4]Conrad H,Karam N,Mannan S.Scr Metall,1983;17:411
[5]Lu H A,Conrad H.Appl Phys Lett,1991;59:47
[6]Conrad H,Guo Z,Sprecher A F.Scr Metall,1989;23:821
[7]Li M Q,Wu S.Scr Metall Mater,1994;31:75
[8]Liu W,Liang K M,Zheng Y K,Cui J Z.Scr Mater,1996;15:1327
[9]He C S,Zhang Y D,Wang Y N,Zhao X,Zuo L,Esling C.Scr Mater,2003;48:737
[10]Whiteley R L.Trans ASM,1960;52:154
[11]Schulz L G.J Appl Phys,1949;20:1030
[12]Liang Z D,Xu J Z,Wang F.Three Dimensional Orientation Distribution Analysis of Textured Materials—ODF Analysis.Shenyang:Northeast University of Technology Press,1986:108 (梁志德，徐家祯，王福．织构材料的三维取向分析术—ODF分析．沈阳：东北工学院出版社，1986：108)

[1]	CHANG Songtao, ZHANG Fang, SHA Yuhui, ZUO Liang. Recrystallization Texture Competition Mediated by Segregation Element in Body-Centered Cubic Metals[J]. 金属学报, 2023, 59(8): 1065-1074.
[2]	Quan FU,Yuhui SHA,Zhenghua HE,Fan LEI,Fang ZHANG,Liang ZUO. Recrystallization Texture and Magnetostriction in Binary Fe₈₁Ga₁₉ Sheets[J]. 金属学报, 2017, 53(1): 90-96.
[3]	Yan ZHANG,Mingxing GUO,Hui XING,Fei WANG,Xiaofeng WANG,Jishan ZHANG,Linzhong ZHUANG. INFLUENCE OF DIFFERENT THERMOMECHANICAL PROCESSES ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF Al-Mg-Si-Cu ALLOY SHEETS[J]. 金属学报, 2015, 51(12): 1425-1434.
[4]	JIANG Qiwu; LIU Y; ong; ZHANG Jingang; LIU Rendong; ZHANG Xiaogang; ZUO Liang. Plastic Strain Ratio Calculation of Metal Sheet from Low-Resolution Texture Analysis[J]. 金属学报, 2004, 40(5): 555-560 .
[5]	YANG Ping; O.ENGLER(Institute of Metal Science and Metal Physics; Aachen University of Technology; Kopernikusstr. 14; D-52056;Aachen; Germany) Now: School of Materials Science and Engineering; University of Science and Technology Beijing; Beijing;100083 Now: Los Alamos National Laboratory; Center for Materials Science; K765; Los Alamos; NM87545; USACorrespondent: YANG Ping; Tel: (010)62333436; Fax: (010)62332336. PARTICLE STIMULATED NUCLEATION AND THE FORMATION OF RSCRYSTALLIZATION TEXTURE IN Al-Mn ALLOY CONTAINING PARTICLES Ⅱ. Interaction Between Particles and Other Nucleation Sites and the Formation of Recrystallization Texture[J]. 金属学报, 1998, 34(8): 793-801.
[6]	YANG Ping; O.ENGLER(Institute of Metal Science and Metal Physics; Aachen University of Technology; Kopernikusstr. 14; D-52056;Aachen; Germany) Now: School of Materials Science and Engineering; University of Science and Technology Beijing; Beijing;100083 Now: Los Alamos National Laboratory; Center for Materials Science; K765; Los Alamos; NM87545; USACorrespondent: YANG Ping; Tel. (010)623s3Js6; Fax: (010)62332336. PARTICLE STIMULATED NUCLEATION AND THE FORMATION OF RECRYSTALLIZATION TEXTURE IN Al-Mn ALLOY CONTAINING PARTICLES Ⅰ. Deformation Zones Around Particles and Particle Stimulated Nucleation[J]. 金属学报, 1998, 34(8): 785-792.
[7]	ZHAO Xiang(Northeastern University; Shenyang 110006); SEKI Fumie; ITO Kunio(Universily of Tokyo; Japon); YOSHINADA Naoki(Nippon Steel Compony; Japan) (Manuscript received 1994-03-07; in revised form 1995-01-12). INFLUENCE OF DISSOLVED CARBON CONTENT ON RECRYSTALLIZATION γ TEXTURE IN ULTRA-LOW CARBON DEEP DRAWING STEEL WITH HIGH PURITY[J]. 金属学报, 1995, 31(18): 262-265.
[8]	LIU Yansheng;ZHAO Xiong;LIANG Zhide Northeast University of Technology; Shenyang Department of Materials Science and Engineering;Northeast University of Technology;Shenyang 110006. COLD ROLLING TEXTURE AND RECRYSTALLIZATION TEXTURE OF CROSS SHEAR ROLLED COMMERCIAL COPPER[J]. 金属学报, 1990, 26(3): 126-130.
[9]	ZHAO Xiang;ZUO Liang;XU Jiazhen;WANG Fu;LIANG Zhide Northeast University of Technology; Shenyang ZHAO Xiang; Faculty of Metallography; Northeast University of Technology; Shenyang 110006. TEXTURAL REPRESENTATION FOR DEEP DRAWING STEEL SHEET[J]. 金属学报, 1989, 25(6): 149-151.
[10]	ZHANG Yumei;JIANG Wenhui Northeast University of Technology; ShenyangDept.of Materials Science and Engineering;Northeast University of Technology;Shenyang. SECONDARY RECRYSTALLIZATION TEXTURE IN 50%Ni-Fe ALLOY WITH CUBIC ORIENTATION[J]. 金属学报, 1988, 24(3): 217-220.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed