MICROSTRUCTURE AND ELECTRICAL PROPERTIES OF Ag/(Sn0.8La0.2)O2 COATING PREPARED BY PLASMA SPRAYING

doi:10.3724/SP.J.1037.2012.00599

Acta Metall Sin

2013, Vol. 49

Issue (3): 325-329 DOI: 10.3724/SP.J.1037.2012.00599

Current Issue | Archive | Adv Search

MICROSTRUCTURE AND ELECTRICAL PROPERTIES OF Ag/(Sn_0.8La_0.2)O₂ COATING PREPARED BY PLASMA SPRAYING

FU Chong¹, WANG Junbo¹, YANG Minge¹, HOU Jinli¹, DING Bingjun2

1）Mechanical and Electronic Engineering College, Xi'an Polytechnic University, Xi'an 710048

2）National Laboratory for Materials Strength, Xi'an Jiaotong University, Xi'an 710049

Cite this article:

FU Chong, WANG Junbo, YANG Minge, HOU Jinli, DING Bingjun. MICROSTRUCTURE AND ELECTRICAL PROPERTIES OF Ag/(Sn_0.8La_0.2)O₂ COATING PREPARED BY PLASMA SPRAYING. Acta Metall Sin, 2013, 49(3): 325-329.

Download:

PDF(707KB)
Export: BibTeX | EndNote (RIS)

Abstract

As a pollution_-free contact material, Ag/SnO₂ has shown a promising prospect to replace noxious Ag/CdO because of its remarkable resistance to arc_-erosion and welding. Especially La_-doped Ag/SnO₂ contact alloy shows excellent electrical properties during arcing test. In this paper, Ag/(Sn_0.8La_0.2)O₂ coating on the Cu substrate was prepared by atmospheric plasma spraying. The phase structure and microstructure of Ag/(Sn_0.8La_0.2)O₂ coating were characterized using XRD and SEM, respectively. The tests of tensile and arc erosion were employed to evaluate bonding strength and electrical properties of coating. The results show that the prepared coating has the uniform dense microstructure. The nanosized (Sn_0.8La_0.2)O₂ particles are uniformly dispersed within the Ag matrix of coating. The bonding strength is 18.8 MPa. The breakdown strength and arc erosion rate of coating are 3.76×10⁷ V/m and 37.7 μg/C, and the value are close to the bulk material. After arcing test, the surface of coating presents the dispersion of cathode spots and a little erosion, and the arc erosion mechanism of Ag/(Sn_0.8La_0.2)O₂ coating has a change tendency from liquid splash to evaporation erosion.

Key words: plasma spraying Ag/(Sn_0.8La_0.2)O₂ contact material breakdown strength arc erosion

Received: 11 October 2012

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	FU Chong
	WANG Junbo
	YANG Minge
	HOU Jinli
	DING Bingjun

URL:

https://www.ams.org.cn/EN/10.3724/SP.J.1037.2012.00599 OR https://www.ams.org.cn/EN/Y2013/V49/I3/325

[1] Hauner F, Jeannot D. In: Mcneilly K ed.,Proc 20th Int Conf on Electrical Contacts, Seattle: IEEE, 2000: 19

[2] Gardener J, Mcdonnell D. In: Ramoni P ed.,Proc 14th Int Conf on Electrical Contacts, Holm: IEEE, 1995: 373

[3] Chen J C, Sun J L, Zhang K H, Du Y, Zhou X L, Gan G Y.Elec Eng Mater, 2002; (4): 41

(陈敬超, 孙加林, 张昆华, 杜焰, 周晓龙, 甘国友. 电工材料, 2002; (4): 41)

[4] Verma A, Ananthraman T R.J Mater Sci, 1992; 27: 5623

[5] Chi L, Streicher E, Fitzgerald D. In: Mcneilly K ed.,Proc 20th Int Conf on Electrical Contacts, Seattle: IEEE, 2000: 64

[6] Hauner F, Jeannot D. In: Ruhlicke D ed.,Proc 26th Int Conf on Electrical Contacts, Chicago: IEEE, 2004: 225

[7] Wang J B, Zhang Y, Yang M G, Ding B J, Yang Z M.Mater Sci Eng, 2006; B131: 230

[8] Fu C, Jiang F Y, Wang J B, Yang M G, Liu Y, Jiang B L.Trans Elec Soc, 2010; 25(5): 44

(付翀, 姜凤阳, 王俊勃, 杨敏鸽, 刘英, 蒋百灵. 电工技术学报, 2010; 25(5): 44)

[9] Lu J G, Wang J Q, Zhao J Y, Wen M, Wang B Z.Rare Met, 2002; 21: 289

[10] Zhou X L, Chen J C, Cao J C, Sun J L, Zhang K H, Du Y, Chen Y W.Rare Met Mater Eng, 2008; 37: 223

(周晓龙, 陈敬超, 曹建春, 孙加林, 张昆华, 杜焰, 陈义武. 稀有金属材料与工程, 2008; 37: 223)

[11] Zhou X L, Chen J C, Sun J L, Zhang K H, Du Y.J Nonferrous Metall, 2006; 16: 289

(周晓龙, 陈敬超, 孙加林, 张昆华, 杜焰. 中国有色金属学报, 2006; 16: 289)

[12] Zhang G Q, Yin Z M, Wu H J, Wan J G, Zhang K H.Chin J Nonferrous Met, 2008; 18: 67

(张国庆, 尹志民, 武海军, 万吉高, 张昆华. 中国有色金属学报, 2008; 18: 67)

[13] Fu C, Wang J B, Yang M G, Su X L, Xu J, Jiang B L.J Non_-Cryst Solids, 2011; 357: 1172

[14] Wang J B, Zhang Y, Yang M G, Chen L C, Ding B J.Rare Met Mater Eng, 2005; 34: 1790

(王俊勃, 张燕, 杨敏鸽, 陈立成, 丁秉钧. 稀有金属材料与工程, 2005; 34: 1790)

[15] Xu A B, Wang Y P, Ding B J.J Mater Res, 2003; 17: 156

(徐爱斌, 王亚平, 丁秉钧. 材料研究学报, 2003; 17: 156)

[16] Yang X H, Fan Z K, Liang S H, Xiao P.J Mater Res, 2007; 21: 414

(杨晓红, 范志康, 梁淑华, 肖鹏. 材料研究学报, 2007; 21: 414)

[17] Liu X Q, Zheng Y G, Chang X C, Hou W L, Wang J Q, Tang Z, Burgess A.J Alloys Compd, 2009; 484: 300

[18] Liang B, Liao H L, Ding C X.Thin Solid Films, 2005; 484: 225

[19] Kulkarni A, Wang Z, Nakamura T.Acta Mater, 2003; 51: 2457

[20] Yin Z J, Tao S Y, Zhou X M, Ding C X.Appl Surf Sci, 2008; 254: 1636

[21] Liang B, Ding C X.J Aero Mater, 2009; 29: 48

(梁波, 丁传贤. 航空材料学报, 2009; 29: 48)

[22] Wang J B, Liu Y, Fu C, Yang M G, Ding B J.Rare Met Mater Eng, 2009; 38: 2023

(王俊勃, 刘英, 付翀, 杨敏鸽, 丁秉钧. 稀有金属材料与工程, 2009; 38: 2023)

[23] Xiang J Y, Chen S H, Huang J H, Zhao X K, Zhang H.Acta Metall Sin, 2012; 48: 965

(项建英, 陈树海, 黄继华, 赵兴科, 张华. 金属学报, 2012; 48: 965)

[24] Ling G P, Xue T, Ni M L, Liu Y T.Precious Met, 2008; 29: 1

(凌国平, 薛天, 倪孟良, 刘远廷. 贵金属, 2008; 29: 1)

[25] Wang S J.PhD Dissertation, Zhejiang University, Hangzhou, 2006

(王尚军. 浙江大学博士学位论文, 杭州, 2006)

[1]	HE Xingqun, FU Huadong, ZHANG Hongtao, FANG Jiheng, XIE Ming, XIE Jianxin. Machine Learning Aided Rapid Discovery of High Perfor-mance Silver Alloy Electrical Contact Materials[J]. 金属学报, 2022, 58(6): 816-826.
[2]	REN Yuan, DONG Xinyuan, SUN Hao, LUO Xiaotao. Oxide Cleaning Effect of In-Flight CuNi Droplet During Atmospheric Plasma Spraying by B Addition[J]. 金属学报, 2022, 58(2): 206-214.
[3]	MA Minjing, QU Yinhu, WANG Zhe, WANG Jun, DU Dan. Dynamics Evolution and Mechanical Properties of the Erosion Process of Ag-CuO Contact Materials[J]. 金属学报, 2022, 58(10): 1305-1315.
[4]	LI Xiaoqian, WANG Fuguo, LIANG Aimin. Effect of Spraying Process on Microstructure and Tribological Properties of Ta₂O₅ In Situ Composite Nanocrystalline Ta-Based Coatings[J]. 金属学报, 2021, 57(2): 237-246.
[5]	Jianxiang DING,Wubian TIAN,Dandan WANG,Peigen ZHANG,Jian CHEN,Zhengming SUN. Arc Erosion and Degradation Mechanism ofAg/Ti₂AlC Composite[J]. 金属学报, 2019, 55(5): 627-637.
[6]	XIANG Jianying CHEN Shuhai HUANG Jihua ZHAO Xingke ZHANG Hua. THERMAL SHOCK RESISTANCE OF La₂(Zr_0.7Ce_0.3)₂O₇THERMAL BARRIER COATING PREPARED BY ATMOSPHERIC PLASMA SPRAYING[J]. 金属学报, 2012, 48(8): 965-970.
[7]	LIU Jing SHENG Hongfei ZHANG Baoshan PENG Liangming. PROPERTIES OF Ti₃XC₂(X=Al, Si) WITH PLASMA SPRAYED ZrO₂ THERMAL BARRIER COATING[J]. 金属学报, 2011, 47(9): 1141-1146.
[8]	. MICROSTRUCTURE AND PROPERTIES OF Al2O3 CERAMIC COATING BY PLASMA SPRAYING AND LASER REMELTING ON MAGNESIUM ALLOY[J]. 金属学报, 2007, 43(5): 493-497 .
[9]	CHEN Hancun;LIU Zhengyi;ZHUANG Yuzhi South China University of Technology; Guangzhoudoctoral Department of Mechanical Engineering No.2; South China University of Technology;Guangzhou 510641. STRUCTURAL CHANGE OF PLASMA SPRAYED ZrO_2 COATING AFTER LASER REMELTING[J]. 金属学报, 1993, 29(8): 72-76.
[10]	WEN Lishi;QIAN Shengwei;HU Qingyu;GUAN Kan;ZHUANG Yuzhi Institute of Metal Research; Academia SinicaInstitute of Metal Research;Academia Sinica;Shenyang. CHARACTERIZATION OF MICROSTRUCTURE OF PLASMA SPRAYED SUPERCONDUCTING COATING[J]. 金属学报, 1988, 24(3): 286-289.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed