|
|
|
| CONSTITUTIVE MODELING FOR ELEVATED TEMPERATURE FLOW BEHAVIOR OF INCOLOY 800H SUPERALLOY |
| SUN Chaoyang, LIU Jinrong, LI Rui, ZHANG Qingdong |
| School of Mechanical and Engineering, University of Science and Technology Beijing, Beijing 100083 |
|
Cite this article:
SUN Chaoyang LIU Jinrong LI Rui ZHANG Qingdong. CONSTITUTIVE MODELING FOR ELEVATED TEMPERATURE FLOW BEHAVIOR OF INCOLOY 800H SUPERALLOY. Acta Metall Sin, 2011, 47(2): 191-196.
|
|
|
Abstract In order to realize accurate numerical simulation of rolling, forging, extrusion of Incoloy 800H superalloy and formulate reasonable process parameters of hot working, the flow stress behaviors of Incoloy 800H superalloy were investigated in the temperature range of 1273-1473 K and strain rate range of 0.01-10 s-1 on Gleeble-1500 thermo-simulation machine. Utilizing hyperbolic sine function and introducing the strain factor with six polynomial fitting, the constitutive equations of flow stress of Incoloy 800H superalloy at high temperature were established, then the accuracy of the constitutive equation was verified. The results showed that during the hot compression deformation of Incoloy 800H superalloy, the characteristics of dynamic softening and dynamic recovery were observed at lower strain rates and high strain rates conditions, respectively, flow stress increased with increasing strain rate, decreased with increasing temperature; the flow stress of Incoloy 800H superalloy predicted by the proposed models with 6th order polynomial fit agrees with the experimental value well, relative error is not more than 6.5% at the overwhelming majority (95%) cases of the deformation conditions, and average relative error is only 3.15%.
|
|
Received: 30 August 2010
|
|
|
| Fund: Supported by National Natural Science Foundation of China (No.50831008) |
| [1] Tan L, Ren X, Sridharan K, Allen T R. Corros Sci, 2008; 50: 2040[2] Yang J M. Petroleum Refinery Eng, 2002; 32(6): 18(杨锦明. 炼油设计, 2002; 32(6): 18)[3] Natesan K, Shankar P S. J Nucl Mater, 2009; 394: 46[4] Tan L, Sridharan K, Allen T P. J Nucl Mater, 2006; 348: 263[5] Sellars C M, McTegart W J. Acta Metall, 1966; 14: 1136[6] Pu Z J, Wu K H, Shi J, Zou D. Mater Sci Eng, 1995; A192: 780[7] Lin Y C, Chen M S, Zhong J. Comput Mater Sci, 2008; 42: 470[8] Mandal S, Rakesh V, Sivaprasad P V, Venugopal S, Kasiviswanathan K V. Mater Sci Eng, 2009; A500: 114[9] Hou H L, Jiang B, Wang Y Q, Li Z Q, Ren X P. Forg Stamp Technol, 2005; (1): 61(侯红亮, 姜波, 王耀奇, 李志强, 任学平. 锻压技术, 2005; (1): 61)[10] Zhang M C, Luo Z J, Zeng F C. J Mater Eng, 1999; (1): 20(张麦仓, 罗子健, 曾凡昌. 材料工程, 1999; (1): 20)[11] He Y, Zhang H G, Liu X F, Xie J X. Rare Metal Meter Eng, 2008; 37: 19(何勇, 张红钢, 刘雪峰, 谢建新. 稀有金属材料与工程, 2008; 37: 19)[12] Zhang B J, Zhao G P, Jiao L Y, Xu G H, Qin H Y, Feng D. Acta Metall Sin, 2005; 41: 351(张北江, 赵光普, 焦兰英, 胥国华, 秦鹤勇, 冯涤. 金属学报, 2005; 41: 351)[13] Ju Q, Li D G, Liu G Q. Acta Metall Sin, 2006; 42: 218(鞠 泉, 李殿国, 刘国权. 金属学报, 2006; 42: 218)[14] Li M Q, Yao X Y, Luo J, Lin Y Y, Sun S B, Wang H R. Acta Metall Sin, 2007; 43: 9(李淼泉, 姚晓燕, 罗 皎, 林莺莺, 苏少博, 王海荣. 金属学报, 2007; 43: 9)[15] Zener C, Hollomon H. J Appl Phys, 1944; 15: 22[16] Sun C Y, Liu J R, Li R, Zhang Q D, Dong J X. Rare Metals, 2011; 30: 1[17] Lei T, Baeder J D. SIAM J Sci Comput, 1999; 20: 3[18] Phaniraj M P, Lahiri A K. J Mater Process Technol, 2003; 141: 219 |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
