Please wait a minute...
Acta Metall Sin  1987, Vol. 23 Issue (2): 118-239    DOI:
Current Issue | Archive | Adv Search |
THERMOMECHANICAL TREATMENT OF A SUPERSATURATED SOLID SOLUTION OF LD-2 ALUMINIUM ALLOY
ZHENG Yangzeng; WANG Yulin; LIU Defu (The Northeast Heavy Machinery Institute; Fulaerji; Heilongjiang) (Manuscript received 27 August; 1985; revised manuscript 17 April; 1986)
Cite this article: 

ZHENG Yangzeng; WANG Yulin; LIU Defu (The Northeast Heavy Machinery Institute; Fulaerji; Heilongjiang) (Manuscript received 27 August; 1985; revised manuscript 17 April; 1986). THERMOMECHANICAL TREATMENT OF A SUPERSATURATED SOLID SOLUTION OF LD-2 ALUMINIUM ALLOY. Acta Metall Sin, 1987, 23(2): 118-239.

Download:  PDF(1555KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Hot torsion tests were carried out on supersaturated solid solution of an aluminium alloy containing 0.7% Mg and 0.97%Si. The flow curves at 480/400/ 270℃ and a strain rate of 1.31s~(-1) were measured. The dynamic structure changes and their influences on the subsequent aging behavior of the alloy quenched immediately after hot deformation were investigated. It has been found that the aginghardening ability and the time to the peak hardness of the supersaturated solid solution quenched directly after hot deformation are related to the dynamic precipitation of Mg_2Si. Under the conditions of absence or presence of a small amount of the precipitates, the ability is about 15% higher and the time is an order of magnitude shorter for the sample quenched immediately after deformation than for that quenched conventionally. The microstructure of the sample hot deformed, directly quenched and aged is charactrized by existence of recovery substructure as well as much finer dispersive aging precipitates.
Received:  18 February 1987     
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1987/V23/I2/118

1 Blade J C, Bryant A J, Thomas A T. Met Technol 1976; 3: 380
2 邢广忠.硕士论文,东北重型机械学院,1982
3 Young C M, Sherby O D. In: Metal Forming: Interrelation Between Theory and Practice. New York: Plenum, 1971, 429
4 Gardner K J, Grimes R. Met Sci 1979; 13:216
5 王玉林,郑炀曾,刘德富.机械工程学报,1986;22:85
6 金子纯一.热处理,1981;21:331
No related articles found!
No Suggested Reading articles found!