Effect of Initial Grain Size on Dynamic Recrystallization of Ferrite in

Acta Metall Sin

2004, Vol. 40

Issue (2): 141-147 DOI:

Research Articles

Current Issue | Archive | Adv Search

Effect of Initial Grain Size on Dynamic Recrystallization of Ferrite in

LI Longfei; YANG Wangyue;SUN Zuqing

School of Materials Science & Engineering; University of Science

Cite this article:

LI Longfei; YANG Wangyue; SUN Zuqing. Effect of Initial Grain Size on Dynamic Recrystallization of Ferrite in. Acta Metall Sin, 2004, 40(2): 141-147 .

Download:

PDF(11487KB)
Export: BibTeX | EndNote (RIS)

Abstract The hot deformation behavior and the microstructure evolution of a low carbon steel with different initial grain sizes are investigated by uniaxial hot compression at deformation temperatures of 700 ℃ and 600 ℃ and strain rates of 10 s-1 to 10-3 s-1. The effect of initial grain size and hot deformation parameter Z on dynamic recrystallization of ferrite is approached. The results indicate that under the present deformation conditions, the dynamic recrystallization of ferrite takes place in the low carbon steel. The decrease of initial grain size is not only of benefit to the dynamic recrystallization of ferrite at a certain Z value, but also leads to the increase of the critical values of Z for both the dynamic recrystallization of ferrite and the discontinuous dynamic recrystallization of ferrite. It is suggested that the fine ferrite formed by deformation enhanced transformation is beneficial to the occurrence of dynamic recrystallization of ferrite during hot deformation. Further refinement of the fine ferrite can be realized by the dynamic recrystallization of ferrite under a suitable Z value.

Key words: dynamic recrystallization of ferrite low carbon steel

Received: 24 February 2003

ZTFLH:	TG111.7
	TG142.31

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	LI Longfei
	YANG Wangyue
	SUN Zuqing

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y2004/V40/I2/141

[1] Sun Z Q, Yang W Y, Qi J J, Hu A M. Mater Sci Eng, 2002; 334A: 201
[2] Sakai T, Jonas J J. Acta Metall, 1984; 32: 189
[3] Li L F, Yang W Y, Sun Z Q. Acta Metall Sin, 2003; 39: 419(李龙飞,杨王玥,孙祖庆.金属学报, 2003; 39: 419)
[4] Yang W Y, Wang H M, Li L F, Sun Z Q. Acta Metall Sin, 2003; 39: 691(杨王玥,王红梅,李龙飞,孙祖庆.金属学报,2003;39:691)
[5] Glover G, Sellars C M. Metall Trans, 1973; 4: 765
[6] Tsuji N, Matsubara Y, Saito Y. Scr Mater, 1997; 37: 477
[7] Tsuji N, Matsubara Y, Saito Y, Maki T. J Jpn Inst Met, 1998; 62: 967((?)伸泰,松原行宏,斋藤好弘,牧正志.日本金属学会志,1998;62:967)
[8] Gao F, Xu Y, Song B, Xia K. Metall Mater Trans, 2000; 31A: 21
[9] Li L F, Yang W Y, Sun Z Q, Wang Q F. J Univ Sci Technol Beijing, 2001; 23: 225(李龙飞,杨王玥,孙祖庆,王青峰.北京科技大学学报,2001;23:225)

[1]	ZHANG Fei, SHEN Jian, YAN Xiaodong, SUN Jianlin, JIANG Na, ZHOU Hua. DYNAMIC SOFTENING MECHANISM OF 2099 ALLOY DURING HOT DEFORMATION PROCESS[J]. 金属学报, 2014, 50(6): 691-699.
[2]	JIANG Qingwei LIU Yin WANG Yao CHAO Yuesheng LI Xiaowu . MICROSTRUCTURAL INSTABILITY OF ULTRAFINE--GRAINED COPPER UNDER ANNEALING AND HIGH--TEMPERATURE DEFORMING[J]. 金属学报, 2009, 45(7): 873-879.
[3]	SHEN Kun WANG Mingpu GUO Mingxing LI Shumei . STUDY ON HIGH TEMPERATURE DEFORMATION CHARACTERISTICS OF Cu–0.23%Al₂O₃DISPERSION–STRENGTHENED COPPER ALLOY[J]. 金属学报, 2009, 45(5): 597-604.
[4]	JIANG Liwu LI Shusuo QIU Zicheng HAN Yafang . EFFECTS OF WITHDRAWAL RATE ON MICROSTRUCTURE AND STRESS RUPTURE PROPERTIES OF A Ni₃Al–BASED SINGLE CRYSTAL SUPERALLOY IC6SX[J]. 金属学报, 2009, 45(5): 547-552.
[5]	TAN Jun LI Cong SUN Chao YING Shihao LIAN Shanshan KAN Xiwu FENG Keqin. THERMALLY ACTIVATED DEFORMATION AND DYNAMIC STRAIN AGING OF Zr–4 ALLOY DURING STRESS RELAXATION[J]. 金属学报, 2009, 45(2): 173-177.
[6]	WANG Lina YANG Ping XIA Weijun CHEN Zhenhua CHEN Ding LI Xiao MENG Li. TEXTURES AND DEFORMATION MECHANISMS OF AZ31 MAGNESIUM ALLOYS UNDER SPECIAL PROCESSING TECHNOLOGIES[J]. 金属学报, 2009, 45(1): 58-62.
[7]	. INVERSE ANALYSIS METHOD TO DETERMINE KINETICS FOR STATIC RECRYSTALLIZATION USING FLOW CURVES[J]. 金属学报, 2008, 44(7): 837-842 .
[8]	LI Ya-Nan; Yafang HAN. SURFACE RECRYSTALLIZATION IN A Ni3Al BASE SINGLE CRYSTAL ALLOY IC6SX[J]. 金属学报, 2008, 44(4): 391-396 .
[9]	. Impact properties of Al-Cu alloy subjected to equal channel angular pressing[J]. 金属学报, 2007, 43(12): 1251-1255 .
[10]	. Effect of Cementite Particle Size on Dynamic Recrystallization of Ferrite of a Low Carbon Steel[J]. 金属学报, 2007, 43(10): 1009-1014 .
[11]	. The distribution and diffusion of carbon atoms during deformation of undercooled austenite in medium carbon steel[J]. 金属学报, 2007, 43(8): 785-790 .
[12]	WANG Weiguo; ZHOU Bangxin; FENG Liu; ZHANG Xin; XIA Shuang. Grain Boundary Character Distributions (GBCD) of Cold-Rolled Pb--Ca--Sn--Al Alloy[J]. 金属学报, 2006, 42(7): 715-721 .
[13]	. SIMULATION OF STATIC RECRYSTALLIZATION OF HOT DEFORMED AUSTENITE IN A LOW CABON STEEL ON MESOSCALE[J]. 金属学报, 2006, 42(5): 474-480 .
[14]	Quan Ju. Hot deformation and processing map of GH2674 superalloy[J]. 金属学报, 2006, 42(2): 218-224 .
[15]	ZHANG Beijiang; ZHAO Guangpu; XU Guohua; FENG Di. Hot deformation behavior and micro-structure evolution of superalloy GH742[J]. 金属学报, 2005, 41(11): 1207-1214 .

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed