Please wait a minute...
Acta Metall Sin  2004, Vol. 40 Issue (1): 62-66     DOI:
Research Articles Current Issue | Archive | Adv Search |
Mechanical Properties Of The As--Cast Ti--Zr--Ni Bulk Quasicrystalline Alloys
QIANG Jianbing; WANG Yingmin; YUAN Lijiang
Department of Materials Engineering; Dalian University of Technology
Cite this article: 

QIANG Jianbing; WANG Yingmin; YUAN Lijiang. Mechanical Properties Of The As--Cast Ti--Zr--Ni Bulk Quasicrystalline Alloys. Acta Metall Sin, 2004, 40(1): 62-66 .

Download:  PDF(305KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Bulk Ti--Zr--Ni quasicrystals (QCs) were prepared by using conventional suction casting method. The characterization on their mechanical properties has been carried out by means of indentation and compression tests at room temperature. The strength indices of the icosahedral phase (I--phase)—based duplex phase alloy (α--Ti(Zr)+I phase) are 5.5 GPa in hardness and 1000 MPa in fracture strength, respectively. The Young's modulus is in the range of 23---36 GPa. The as--castTi60Zr25Ni15 QC--based composite alloy exhibits an elastic deformation capability of 4.2 % under a monaxial compression, which is about 4 times as large as that of Al—based QCs. The quasi--cleavage fracture morphologies indicate the bulk QC--based composite alloys to be brittle fracture.
Key words:       
Received:  20 January 2003     
ZTFLH:  TG136  
  TG113.25  

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2004/V40/I1/62

[1] Dubois J M. Mater Sci Eng, 2000; 294-296A: 4
[2] Nicula R, Jianu A, Ponkratz U, Burkel E. Phys Rev, 2000; 62B: 8844
[3] Ponkratz U, Nicula R, Jianu A, Burkel E. Ferroelectrics, 2001; 250:269
[4] Ponkratz U, Nicula R, Jianu A, Burkel E. J Phys, 2000;12:8071
[5] Foster K, Leisure R G, Shaklee J B, Kim J Y, Kelton K F. Phys Rev, 2000; 61B: 241
[6] Qiang J B, Wang Y M, Wang D H, Kramer M J, Dong C. J Non-Crystlline Solids, 2003; in Press
[7] Qiang J B, Wang Y M, Wang D H, Kramer M J. Philos Mag Lett, 2003; 83:467
[8] Sigl L S, Mataga P A, Dalgleish B J, Meecking R M, Evans A G. Acta Metal Mater, 1988; 36:945
[9] Cahn J W, Shechtman D, Gratias D. J Mater Res, 1986; 1:13
[10] Bresson L. In: Hippert F, Gratias D eds., Lectures on Quasicrystals. Les Ulis: Les Editios de Physique, 1994: 549
[11] Koster U, Liebertz H, Liu W. Mater Sci Eng, 1994: 181-182A: 777
[12] Dong C. Quasicrystalline Materials. Beijing: National Defence Industry Press, 1998:159(董闯.准晶材料.北京:国防工业出版社,1998:159)
[13] Zhang T, Inoue A. Mater Trans JIM, 1998; 39:1230
[1] WANG Luning, LIU Lijun, YAN Yu, YANG Kun, LU Lili. Influences of Protein Adsorption on the in vitro Corrosion of Biomedical Metals[J]. 金属学报, 2021, 57(1): 1-15.
[2] TUNG Feng'en;WANG Yuming Institute of Materials Science; Jilin University; Changchun. X-RAY ANALYSIS OF WORK-HARDENING PROCESS FOR POLYCRYSTALLINE а-BRASS DURING UNIAXIAL TENSILE TEST[J]. 金属学报, 1989, 25(2): 82-84.
[3] WANG Jinliang, WANG Chenchong, HUANG Minghao, HU Jun, XU Wei. The Effects and Mechanisms of Pre-Deformation with Low Strain on Temperature-Induced Martensitic Transformation[J]. 金属学报, 2021, 57(5): 575-585.
[4] DU Hegui;LIU Xin Northeast University of Technology; Shenyang. KINETICS OF CARBON COMBUSTION IN PLASMA AIR[J]. 金属学报, 1989, 25(2): 85-88.
[5] . [J]. 金属学报, 2001, 37(1): 42-46 .
[6] . [J]. 金属学报, 1999, 35(3): 320-324 .
[7] . [J]. 金属学报, 2000, 36(1): 72-76 .
[8] . [J]. 金属学报, 1999, 35(3): 330-333 .
[9] . [J]. 金属学报, 1999, 35(3): 334-336 .
[10] . [J]. 金属学报, 2000, 36(6): 647-650 .
[11] . [J]. 金属学报, 2000, 36(6): 655-658 .
[12] No Author. ACTA METALLURGLCA SLNLCA Volume 28 Series A 1992 SUBJECT INDEX[J]. 金属学报, 1992, 28(12): 63-90.
[13] . [J]. 金属学报, 2000, 36(7): 780-784 .
[14] No Author. ACTA METALLURGICA SINICA(JINSHU XUEBAO) Volume 28 1992 AUTHOR INDEX[J]. 金属学报, 1992, 28(12): 71-94.
[15] Хань Яо-вэнь Инсмцмум мемаддов АН КНР;Г.н.Ойкс Московскц цнсмцмум смадц. НЗУЧЕНИЕ ПРОЦЕССОВ ДЕСУЛЬФУРАЦИИ ХНДКОΓО МЕТАЛЛА В ВАКУУМЕ[J]. 金属学报, 1963, 6(2): 98-110.
No Suggested Reading articles found!