Please wait a minute...
Acta Metall Sin  2004, Vol. 40 Issue (1): 109-112     DOI:
Research Articles Current Issue | Archive | Adv Search |
Effects Of Tial3 Addition In Ti--Al--C System On Combustion Synthesis Of Ti3alc2 Powders
GUO Junming; CHEN Kexin; ZHOU Hepin
State Key Laboratory of New Ceramics and Fine Processing; Department of Materials Science and Engineering;Tsinghua University
Cite this article: 

GUO Junming; CHEN Kexin; ZHOU Hepin. Effects Of Tial3 Addition In Ti--Al--C System On Combustion Synthesis Of Ti3alc2 Powders. Acta Metall Sin, 2004, 40(1): 109-112 .

Download:  PDF(676KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  The experiment results show that the combustion products is TiC and very small amount of Ti3AlC2 if using the stoichiometric ratio of formula Ti3AlC2 and Ti, Al and C powders as raw materials. However, Ti3AlC2 become the main phase in the final product as adding intermetallic compound TiAl3 in the raw mixtures without changing overall stoichiometry. The amount of Ti3AlC2 is increased with increasing the amount of TiAl3 in the initial mixtures. The above experimental phenomena were alsoexplained through thermodynamic and kinetic analysis.
Key words:  combustion synthesis      Ti--Al--C system      
Received:  07 January 2003     
ZTFLH:  TG174  
  O646  

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2004/V40/I1/109

[1] Pietzka M A, Schuster J C. J Phase Equilib, 1994; 15(4) : 392
[2] Ho J C, Hamdeh H H, Barsoum M W, El-Raghy. J Appl Phys, 1999; 86: 3609
[3] Tzenov N V, Barsoum M W. J Am Ceram Soc, 2000; 83: 825
[4] Myhra S, Crossley J AA, Barsoum M W. J Phase Chem Solid, 2001; 62: 811
[5] Barsoum M W, Yoo H I, Polushina I K, Rud V Y, Rud Y V, El-Raghy T. Phys Rev, 2000; 62B: 10194
[6] Barsoum M W, El-Raghy T. J Am Ceram Soc, 1996; 79: 1953
[7] Wang X H, Zhou Y C. J Mater Chem, 2002; 12: 455
[8] Ge Z B, Chen K X, Guo J M, Zhou H P, Ferreira J M F. J Euro Ceram Soc, 2003; 23: 567
[9] Lopacinski M, Puszynski J, Lis J. J Am Ceram Soc, 2001; 84: 3051
[10] Ge Z B, Chen K X, Zhou H P, Guo J M. Key Eng Mater, 2002; 224-226: 539
[11] Tomoshige R, Matsushita T. J Ceram Soc Jpn, 1996; 104(2) : 94
[12] Wang Z D, Hu H Q, Li Q C. Acta Metall Sin (English Letters), 1995; 8: 137
[13] Guo J M, Chen K X, Ge Z B, Liu G H, Zhou H P, Ning X S. Acta Metall Sin, 2003; 39: 409(郭俊明,陈克新,葛振斌,刘光华,周和平,宁晓山.金属学报,2003;39:409)
[14] Choi Y, Rhee S. J Mater Sci, 1993; 28: 6669
[1] ZHANG Deyin, HAO Xu, JIA Baorui, WU Haoyang, QIN Mingli, QU Xuanhui. Effects of Y2O3 Content on Properties of Fe-Y2O3 Nanocomposite Powders Synthesized by a Combustion-Based Route[J]. 金属学报, 2023, 59(6): 757-766.
[2] WANG Ying, ZOU Binglin, CAO Xueqiang. COMBUSTION SYNTHESIS OF TiC-TiB2 PARTICU- LATES LOCALLY REINFORCED STEEL MATRIX COMPOSITES FROM AN Al-Ti-B4C SYSTEM DURING CASTING[J]. 金属学报, 2014, 50(3): 367-372.
[3] Hai-Chang JIANG. Ni RELEASING BEHAVIOR OF POROUS TiNi SHAPE MEMORY ALLOY[J]. 金属学报, 2008, 44(2): 198-202 .
[4] LingLing Wang. Low-Temperature Combustion Synthesis Of Nanocrystalline Ce1-Xndxo2-X/2 Powders[J]. 金属学报, 2006, 42(5): 511-514 .
[5] Ye Pan. TRIBOLOGICAL PROPERTIES OF COMBUSTION SYNTHESISED Cr-Al(Cr)2O3 CERMETS[J]. 金属学报, 2006, 42(5): 492-496 .
[6] PAN Ye; ZHANG Chuan; ZHANG Yancheng; SUN Guoxiong. Combustion Synthesis and Densification of Cr-Al(Cr)2O3 Cermets[J]. 金属学报, 2005, 41(7): 733-737 .
[7] XU Aiqun. A New Aging Precipitated Phase in NiTi Alloy[J]. 金属学报, 2004, 40(2): 125-129 .
[8] WANG Xuecheng; CHAI Huifen; WANG Xiaotian (Xi'an Jiaotong University; Xi'an710049)(Manuscript received 1994-09-23). RESEARCH ON KINETICS OF MICROSTRUCTURAL EVOLUTION IN THE Ni_3Al ALLOY PREPARED BY COMBUSTION SYNTHESIS[J]. 金属学报, 1995, 31(19): 300-304.
[9] WANG Weimin; FU Zhengyi;YUAN Runzhang(Wuhan University of Technology). SELF-PROPAGATING COMBUSTION SYNTHESIS OF NiAl/TiB_2 COMPOSITE[J]. 金属学报, 1994, 30(22): 476-480.
No Suggested Reading articles found!