ADIABATIC SHEAR BAND FORMATION AND ITS MICROSTRUCTURES PRODUCED BY HIGH SPEED PENETRATION IN 30MnCrNiMoB LOW ALLOY STEEL

Acta Metall Sin

1995, Vol. 31

Issue (23): 505-510 DOI:

Current Issue | Archive | Adv Search

ADIABATIC SHEAR BAND FORMATION AND ITS MICROSTRUCTURES PRODUCED BY HIGH SPEED PENETRATION IN 30MnCrNiMoB LOW ALLOY STEEL

LI Qiang;MA Changxiang;LAI Zuhan(Northeastern University;Shenyang 110006)(Manuscript received 1995-03-06)

Cite this article:

LI Qiang;MA Changxiang;LAI Zuhan(Northeastern University;Shenyang 110006)(Manuscript received 1995-03-06). ADIABATIC SHEAR BAND FORMATION AND ITS MICROSTRUCTURES PRODUCED BY HIGH SPEED PENETRATION IN 30MnCrNiMoB LOW ALLOY STEEL. Acta Metall Sin, 1995, 31(23): 505-510.

Download:

PDF(496KB)
Export: BibTeX | EndNote (RIS)

Abstract The formation mechanism of adiabatic shear band(ASB) produced by high speed penetration in 30MnCrNiMoB low alloy steel was studied.During the deformation process.there are not only a thermal softening and the usual strain hardening,another strain softening due to the dynamic emission of dislocations from F-R(Frank-Read) sources should be considered.Experimental observations show that there is periodic structure along ASB,i.e.periodic crack branching along ASB and periodic arrangement of tear ledges on the crack surface along ASB trace.The physical mechanism of the periodic structure is discussed.

Key words: adiabatic shear band strain softening periodic structures

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y1995/V31/I23/505

1RogersHC．AnnRevMaterSci,1979;9:2832WittmanCL,MeryersMA,PakHR．MetallTrans,1990;21A:7073李强,马常祥,赖祖涵.东北大学学报,1994;15:5344ChoK,ChiYC,DuffyJ．MetallTrans,1990;21A:11615KrejciJ,BrezinaJ,BucharJ．ScrMetallMater,1992;27:6116DoddB,AtkinsAG．ActaMetall,1983:31:97BaiYL．In:MeyersMA,MurrLEeds．,ShockWavesandHighStrainRatePhenomenainMetals,NewYork:Plenum,1981:2778OlsonGB．In:MeyersMA,MurrLEeds．,ShockWavesandHighStrainRatePhenomenainMetals,NewYork:Plenum,1981:2219CampbellJD,SimmonsJA,DornJE．JApplMech,1961;28:44710赖祖涵.金属的晶体缺陷与力学性质.北京:冶金工业出版社,1988:20711HirthJP．ScrMetallMater,1993;28:703

[1]	SUN Xiurong, WANG Huizhen, YANG Ping, MAO Weimin. MECHANICAL BEHAVIORS AND MICRO-SHEAR STRUCTURES OF METALS WITH DIFFERENT STRUCTURES BY HIGH-SPEED COMPRESSION[J]. 金属学报, 2014, 50(4): 387-394.
[2]	NI Song, LIAO Xiaozhou, ZHU Yuntian. EFFECT OF SEVERE PLASTIC DEFORMATION ON THE STRUCTURE AND MECHANICAL PROPERTIES OF BULK NANOCRYSTALLINE METALS[J]. 金属学报, 2014, 50(2): 156-168.
[3]	. STUDY OF ADIABATIC SHEAR BANDS IN FATIGUED COPPER SINGLE CRYATALS WITH DIFFERENT ORIENTATIONS UNDER HIGH VELOCITY IMPACT[J]. 金属学报, 2006, 42(3): 245-250 .
[4]	ZHANG Baofa;SHEN Wanci;LIU Yingjie; WANG Yuanfei;TANG Xiangyun (Tsinghua University;Beijing 100084). ADIABATIC SHEAR BAND IN WHITE-ETCHING LAYER[J]. 金属学报, 1997, 33(11): 1161-1164.
[5]	DONG Han; LI Guifen (Central Iron and Steel Research Institute; Ministry of Metallurgical Industry.;Beijing 100081)CHEN Nanping(Tsinghua University; Beijing 100084). MICROSTRUCTURE AND HARDNESS OF ADIABATIC SHEAR BANDS IN HIGH STRENGTH STEELS[J]. 金属学报, 1996, 32(6): 599-604.
[6]	YANG Yang;ZHANG Xinming(Central-South University of Technology; Changsha); LI Zhenghua; LI Qingyun(North-West Institute for Nonferrous Metal Research; Baoji)(Manuscript received 13 December;1993). IN SITU SEM OBSERVATION ON MICROFRACTURE OF TA2/A3 EXPLOSION CLADDING INTERFACE[J]. 金属学报, 1994, 30(9): 409-415.
[7]	FEI Weidong; LI Chao; JIANG Xiangdong; DONG Shangli; YAO Zhongkai(Harbin Institute of Technology). ROTATION OF WHISKERS AND ITS EFFECT ON HIGH TEMPERATURE COMPRESSIVE FLOW STRESS OF SiC_W/Al-Ni COMPOSITE[J]. 金属学报, 1994, 30(18): 283-288.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed