热丝化学气相沉积金刚石薄膜空间场的数值分析

金属学报

2005, Vol. 41

Issue (4): 437-443

论文

本期目录 | 过刊浏览

热丝化学气相沉积金刚石薄膜空间场的数值分析

李建国; 刘实;李依依;胡东平;季锡林;梅军;周德惠

中国科学院金属研究所; 沈阳 110016

Numerical Analysis Of Spacial Field In Hot Filament Chemical Vapor Deposition Diamond Film

LI Jianguo; LIU Shi; LI Yiyi;HU Dongping; JI Xilin; MEI Jun;ZHOU Dehui

引用本文:

李建国; 刘实; 李依依; 胡东平; 季锡林; 梅军 ; 周德惠 . 热丝化学气相沉积金刚石薄膜空间场的数值分析[J]. 金属学报, 2005, 41(4): 437-443 .
, , , , , , . Numerical Analysis Of Spacial Field In Hot Filament Chemical Vapor Deposition Diamond Film[J]. Acta Metall Sin, 2005, 41(4): 437-443 .

全文: PDF(272 KB)

摘要: 根据热丝化学气相沉积(HFCVD)金刚石薄膜的几何特点和工艺参数, 建立了该系统的二维温度场、速度场和密度场的耦合模型。利用该模型对沉积大面积金刚石薄膜的空间场进行了模拟计算, 研究了沉积参数对空间场的影响。结果表明, 衬底处的温度分布和质量流密度的计算值与实测值相吻合。只有气体进口速度对质量流密度的均匀性影响最大, 其它沉积参数对衬底温度的均匀性、质量流密度的均匀性影响不大。从热丝阵列的最低温度出发, 优选出沉积100 mm×100 mm、高质量金刚石薄膜比较适宜的热丝几何参数。

关键词 ：热丝化学气相沉积, 耦合模型, 空间场

Abstract：Two--dimension coupled model of the temperature filed, velocity field and density field was developed according to the geometry and technology parameters in hot filament chemical vapor deposition (HFCVD) diamond film. The spacial field during large area diamond film deposition was simulated using this model to study the influence of deposited parameters. The calculated results about the temperature and the mass flow density on the substrate are consistent with experimented ones. The inlet gas velocity obviously affects the uniformity of the mass flow density, and the other deposited parameters have little influence on the distributions of the temperature and mass flow density. The optimal hot filament geometry parameters to deposit high quality diamond films with an area of 100mmx100 mm are gained on the basis of the minimum temperature along hot filament array.

Key words： HFCVD coupled model spacial field

收稿日期: 2004-05-27

ZTFLH:

TB383

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	李建国
	刘实
	李依依
	胡东平
	季锡林
	梅军
	周德惠
44.8K

链接本文:

https://www.ams.org.cn/CN/ 或 https://www.ams.org.cn/CN/Y2005/V41/I4/437

[1]Banholzer W. Surf Coating Technol, 1992; 53: 1
[2]Wolden C, Mitra S, Gleason K K. J Appl Phys, 1992; 72: 3750
[3]Wang A Y, Sun C, Wang B, Gong J, Huang R F, Wen L S. Ada Metall Sin, 2001; 37: 1217 (汪爱英,孙超,王冰,宫俊,黄荣芳,闻立时.金属学报,2001;37:1217)
[4]Song X M, Zhang X W, Wang B, Chen G H, Yan H. J Beijing Polytechnic Univ, 1999; 25: 91 (宋雪梅,张兴旺,王波,陈光华,严辉.北京工业大学学报,1999;25:91)
[5]Qi X G, Chen Z S. Mater Sci Eng, 2001; 19(3): 29 (戚学贵,陈则韶.材料科学与工程, 2001;19(3):29)
[6]Mark G M, Wen L H, Michael E C, David S D. J Appl Phys, 1994; 76: 7567
[7]Dai D H, Zhou K S. Deposition Technology and Application of Diamond Film. Beijin: Metallurgical Industry Press, 2001: 118 (戴达煌,周克崧.金刚石薄膜沉积制备工艺与应用.北京:冶金工业出版社,2001:118)
[8]Chen Y, Yu J, Chen G C. Vacuum, 1998; 6: 11 (陈岩,于杰,陈广超.真空,1998;6:11)
[9]Spitsyn B V, Bouilov L L, Derjaguin B V. J Cryst Growth, 1981; 52: 219

[1]	李帅君熊守美 Mei Li John Allison. 压铸充型过程中卷气现象的数值模拟研究[J]. 金属学报, 2010, 46(5): 554-560.
[2]	徐锋; 左敦稳; 卢文壮; 王珉 . 纳米金刚石薄膜的微结构和残余应力[J]. 金属学报, 2008, 44(1): 74-78 .
[3]	张昭; 刘亚丽; 张洪武 . 轴向载荷变化对搅拌摩擦焊接过程中材料变形和温度分布的影响[J]. 金属学报, 2007, 43(8): 868-874 .
[4]	宋贵宏; 孙超; 黄荣芳; 闻立时 . HFCVD生长金刚石薄膜中气体状态参数空间场模拟计算[J]. 金属学报, 1999, 35(6): 648-653 .
[5]	潘冶;孙国雄. 棒状共晶的凝固模型[J]. 金属学报, 1996, 32(2): 120-126.

Viewed

Full text

Abstract

Cited

Shared

Discussed