金属学报  1978, Vol. 14 Issue (3): 253-333

论文 本期目录 | 过刊浏览 |

钢中白点断口的显微空隙与台阶花样

陈廉;徐永波;尹万全

中国科学院金属研究所;中国科学院金属研究所;中国科学院金属研究所

UNHEALED POROSITIES AND CRYSTALLINE STEPS IN FLAKES

Chen Lian Xu Yong-bo Yin Wan-quan(Institute of Metal Research; Academia Sinica)

陈廉;徐永波;尹万全. 钢中白点断口的显微空隙与台阶花样[J]. 金属学报, 1978, 14(3): 253-333.
, , . UNHEALED POROSITIES AND CRYSTALLINE STEPS IN FLAKES[J]. Acta Metall Sin, 1978, 14(3): 253-333.

摘要 参考文献 相关文章 Metrics 全文: PDF(4487 KB)   摘要: 在结构钢的白点断口中,用立体显微镜有时可以观察到沿轧制方向的暗线条;用扫描电子显微镜进行高倍观察则为未轧合的疏松残留下来的长条形空隙,内壁光滑,保留有露头枝晶、结晶台阶、显微孔洞等结晶形貌。这种空隙很可能是白点断口的一种断裂源。 Abstract：Dark seams along the rolling direction in certain cases could be observed by means of stereo-microscopic examination of flakes and under higher magnifications in a SEM. These seams were identified as unhealed porosities with crystalline steps and microholes on their inner free surface. The unhealed porosities might be a possible source of flake formation. 收稿日期: 1978-03-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 陈廉 徐永波 尹万全 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1978/V14/I3/253 [1] “层次结构”断口三结合研究组,金属学报,12(1976) ,92． [2] Musatti, I. and Reggior, A., Metal Progr., 3 (1936) , 51． [3] Scott, T. E. and Troiano, A. R., J. Metals, 11 (1959) , 619． [4] Dana, A. W. et al., Trans. AIME, 7 (1955) , 895． [5] #12 [6] 下川義雄,鉄鋼,57(1971) ,1992． [7] Pittinato, G. F. et al., SEM/TEM Fractography Handbook, Metals and Ceramics Information Center, Columbus, (1975) , p. 56． [8] ASM Metals Handbook, vol. 9, Fractography and Atlas of Fractography (1974) , p. 89． [9] Engel-Klingele, Rasterelektronenmikroskopische Untersuchungen von Metallschaden, Gerling Institut fur Schadenforschung und Schadenverhutung GmbH, Koln (1974) , p. 114． [10] Phillips, A. and Kerlins, V., Metal Progr., 95 (1969) , 81． [11] Hemsworth, B. et al., Metal Constr. Brit. Weld. J., 1 (1969) , 5． [12] Ryder, D. A., Acta Met., 9 (1961) , 73． [13] 周敬等,金属学报,14(1978) .# No related articles found! Viewed Full text Abstract Cited   Shared      Discussed