金属学报  1979, Vol. 15 Issue (4): 462-583

论文 本期目录 | 过刊浏览 |

含Ti低碳冷轧汽车薄板织构与塑性应变比R值和深冲性能的关系

丘利;张魁;殷颖;刘玉铭;刘建民

鞍山钢铁公司;鞍山钢铁公司;鞍山钢铁公司;鞍山钢铁公司;鞍山钢铁公司

EFFECTS OF RECRYSTALLIZATION TEXTURES ON THE PLASTIC STRAIN RATIO R AND DEEP-DRAWING PROPERTIES OF COLD ROLLED LOW-CARBON STEEL SHEETS CONTAINING TITANIUM

Qiu Li;Zhang Kui;Yin Ying;Liu Yuming;Liu Jianmin Anshan Iron and Steel Company

丘利;张魁;殷颖;刘玉铭;刘建民. 含Ti低碳冷轧汽车薄板织构与塑性应变比R值和深冲性能的关系[J]. 金属学报, 1979, 15(4): 462-583.
, , , , . EFFECTS OF RECRYSTALLIZATION TEXTURES ON THE PLASTIC STRAIN RATIO R AND DEEP-DRAWING PROPERTIES OF COLD ROLLED LOW-CARBON STEEL SHEETS CONTAINING TITANIUM[J]. Acta Metall Sin, 1979, 15(4): 462-583.

摘要 参考文献 相关文章 Metrics 全文: PDF(2862 KB)   摘要: 研究了含Ti0.145—0.35％,Ti/(C+N)比为2.9—10.1的低碳深冲薄板,测定了不同Ti/(C+N)比时的织构,并与塑性应变比R值和实冲汽车零件的结果作了对照。当Ti/(C=N)>4时,主要织构为有利于深冲的(111)[112]织构;当Ti/(C+N)<4时,主要织构为不利于深冲的(100)[011]织构。深冲性好坏主要取决于薄板所具有的再结晶织构的类型和强弱,而与晶粒形状无关。用透射电镜观察了弥散的TiC,讨论了弥散相TiC对再结晶织构的某些影响。 Abstract：The effects of titanium 0.145-0.35% corresponding to the ratio Ti/(C+N)varied from 2.9 to 10.1 on the recrystallization textures of cold rolled low-carbonsteel sheets have been investigated in comparison with the plastic strain ratio Rand deep-drawing properties. For the ratio Ti/(C+N)>4, the main texture com-ponent of (111) [112] is beneficial to the deep-drawing ability; for the ratio Ti/(C+N)<4, that of (100) [011] is detrimental. It would appear that the deep-drawingproperties were substantially determined by the type and degree of the recrystal-lization textures, but not by their erystalline shape. The influence of fine precipi-tates of TiC phase on the recrystallization texture has been discussed. 收稿日期: 1979-04-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 丘利 张魁 殷颖 刘玉铭 刘建民 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1979/V15/I4/462 [1] 须藤正俊,铁钢薄板再结晶及集合组织,日本组织基礎共同研究会再结晶部会,1974年,p.99． [2] Shiraiwa, T. and Fujino, N., Proceedings of the 5th International Congress on X-Ray Optics and Microanalysis, Edited by G. Mollenstedt, and Gaukler, K. H., Tubingen, 1968, p. 531． [3] 成田贵一,松本洋,铁钢,58 (1972) ,1330． [4] Vieth, R. W. and Whiteley, R. L., Influence of Crystallographic Orientation on Plastic Anisotropy in Deep Drawing Sheet Steel, Paper Presented at the IDDRG Meeting, June 1964, London. [5] Hu, H., Mechanism of Recrystallization Texture Formation in Deep-Drawing Steels, Paper Presented at the 5th International Congress on Texture, 1978． [6] Evans, P. R. V., Bitcon, J. C. and Hughes, I. F., J. Iron Steel Inst., London, 207 (1969) , 331． [7] Takahashi, M. and Okamoto, A., Effects of Nitrogen Content on Recrystallization Textures of Low-Carbon Steel Sheets, Paper Presented at the 5th International Congress on Texture, 1978． [8] 福田宣雄,清水峰男,塑性加工,13(1972) ,№ 142,841． [9] 松岗孝,高桥政司,铁钢,57(1971) ,1134． [10] Blickwede, D. J., Metal Progr., 95 (1969) , № 4, 87．, No related articles found! Viewed Full text Abstract Cited   Shared      Discussed