金属学报  1987, Vol. 23 Issue (4): 379-381

论文 本期目录 | 过刊浏览 |

织构材料X射线衍射谱线的平均强度

林树智;张喜章

中国科学院金属研究所;中国科学院金属研究所

AVERAGE INTENSITY OF X-RAY DIFFRACTION SPECTRA OF TEXTURE MATERIALS

by LIN Shuzhi; ZHANG Xizhang (Institute of Metal Research; Academia Sinica; Shenyang) (Manuscript received 2 February; 1986; revised manuscript 3 July; 1986)

林树智;张喜章. 织构材料X射线衍射谱线的平均强度[J]. 金属学报, 1987, 23(4): 379-381.
, . AVERAGE INTENSITY OF X-RAY DIFFRACTION SPECTRA OF TEXTURE MATERIALS[J]. Acta Metall Sin, 1987, 23(4): 379-381.

摘要 参考文献 相关文章 Metrics 全文: PDF(208 KB)   摘要: <正> 材料的织构是X射线定量相分析的障碍,虽然用全极图求平均强度的方法原则上可以解决,但制作极图费时,有时甚至不可能。因此人们常用一些方便的近似方法如反极图的极密度因子 Abstract：The error of average intensity of X-ray diffraction spectra, in the case of not more enough, from specimen of Fe, Al or Zn having obvious texture was studied. The error of average intensity obtained from measured intensity dividing by polar density factor of the inverse pole figure is so large that it can not be used for quantitative phase analysis. The error of average intensity obtained using oscillation sample holder (the intensity is averaged mechanically over the region from 0 to 60 degree of the pole figure) is improved slightly for Fe or Al, but still large for Zn. The satisfactory result is obtained by means of "the double correction method". The error is 2-5% for Fe or Al, and less than 10% for Zn. 收稿日期: 1987-04-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 林树智 张喜章 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1987/V23/I4/379 1 Mueller M H, Chernock W P, Beck P A. Trans Metall Soc AIME 1958; 212:39 2 Horta S B, Roberts W T, Wilson D V. Trans Metall Soc. AIME, 1969; 245:2525v No related articles found! Viewed Full text Abstract Cited   Shared      Discussed