Please wait a minute...
金属学报  1992, Vol. 28 Issue (4): 40-44    
  论文 本期目录 | 过刊浏览 |
TiAl金属间化合物反常应变速率效应的研究
王理明;祝东;姚枚;蔡其巩;邹敦叙
哈尔滨工业大学;中国科学院金属研究所材料疲劳与失效分析国家重点实验室;冶金工业部钢铁研究总院;哈尔滨工业大学;中国科学院金属研究所材料疲劳与失效分析国家重点实验室;冶金工业部钢铁研究总院;中国科学院金属研究所材料疲劳与失效分析国家重点实验室;冶金工业部钢铁研究总院
ANOMALOUS STRAIN RATE DEPENDENCE OF FLOW STRESS IN TiAl INTERMETALLIC COMPOUNDS
WANG Liming;ZHU Dong;YAO Mei;CAI Qigong;ZOU Dunxu State Key Laboratory for Fatigue and Fracture of Materials; Academia Sinica; Shenyang; Central Iron and Steel Research Institute; Ministory of Metallurgical Industry; Beijing
引用本文:

王理明;祝东;姚枚;蔡其巩;邹敦叙. TiAl金属间化合物反常应变速率效应的研究[J]. 金属学报, 1992, 28(4): 40-44.
, , , , . ANOMALOUS STRAIN RATE DEPENDENCE OF FLOW STRESS IN TiAl INTERMETALLIC COMPOUNDS[J]. Acta Metall Sin, 1992, 28(4): 40-44.

全文: PDF(499 KB)  
摘要: 采用系列温度及不同应变速率条件下的压缩试验研究TiAl,TiAl-V的塑性形变行为结果表明,在不同温度区间,Peierls—Nabarro机制,交滑移机制和蠕变为塑性形变的主要控制机制,TiAl-V合金在600—700K形变时出现反常应变速率效应,而且塑性应变量越大.反常效应越明显,利用位错交滑移的热激活特性理论对此反常效应进行初步解释,温度和应变速率对加工硬化指数的影响及不同塑性应变量对应变速率敏感性的影响在本文中也进行了探讨。
关键词 TiAl金属间化合物应变速率效应交滑移    
Abstract:Plastic deformation of TiAl and TiAl-V intermetallic compounds has been stu-died by compression experiment at various temperatures and strain rates. Results show that theplastic deformation in distinct temperature range is principally controlled by the mechanisms ofPerierls-Nabarro, cross slip and creep of dislocation. For TiAl-V alloy deformed at a range of600--700 K, the negative strain rate dependence of flow stress was observed, i. e., the more theplastic strain is, the more the negative dependence will be. A possible mechanism of the anomalycould be interpreted by thermal activation of dislocation cross slipping. The effects of tempera-ture and strain rate on work-hardening exponent were also studied and discussed.
Key wordsTiAl    intermetallic compound    strain rate    cross-slip
收稿日期: 1992-04-18     
基金资助:国家自然科学基金
1 Kear B H, Wilsdorf H G F. Trans Metall Soc AIME, 1962; 224: 382
2 De Bussac A, Webb G, Antolovich S D. Metall Trans, 1991; 22A: 125
3 Yoo M H, Horton J A, Liu C T. Acta Metall, 1988; 36: 2935
4 蒲忠杰.冶金工业部钢铁研究总院博士学位论文,1990
5 Huang S-C, Hall E L. Metall Trans, 1991; 22A: 427
6 Pu Zhongjie, Zhu Dong, Cai Qigong, Zou Dunxu. Plastic Deformation and Fracture of TiAl-X Compound. TMS 1989 Fall Meeting MRS, October, 2--5, Indianapolis, Indiana, USA.
7 Kawabata T, Kanai T, Izumi O. Acta Metall, 1985; 33: 1355
8 Hann Y-D, Whang S H. Mater. Research Society Symp Proc, MRS, 1989: 133: 385
9 Penning P. Acta Metall, 1972; 20: 1169
10 Onodera R, Koga M, Era H, Shimizu M. Acta Metall, 1984; 32: 1829
[1] 耿林, 吴昊, 崔喜平, 范国华. 基于箔材反应退火合成的TiAl基复合材料板材研究进展[J]. 金属学报, 2018, 54(11): 1625-1636.
[2] 张飞, 沈健, 闫晓东, 孙建林, 蒋呐, 周华. 2099合金热变形过程中的动态软化机制*[J]. 金属学报, 2014, 50(6): 691-699.
[3] 彭英博,陈锋,王敏智,苏翔,陈光. Ti-45Al-8Nb合金PST晶体片层取向与力学性能的关系[J]. 金属学报, 2013, 49(11): 1457-1461.
[4] 刘江涛 王中光 尚建库. [110]和[112]取向β-Sn单晶体的形变行为[J]. 金属学报, 2008, 44(12): 1409-1414.
[5] 金光熙; 乔利杰; 高克玮; 木村隆; 桥本健纪; 褚武扬 . Mn和V对TiAl合金热腐蚀的影响[J]. 金属学报, 2004, 40(2): 179-184 .
[6] 何秀丽;王华明;郑启光;许德胜. TiAl金属间化合物碳元素激光表面合金化[J]. 金属学报, 1998, 34(9): 983-986.
[7] 唐兆麟;王福会;吴维. 磷酸处理对TiAl金属间化合物抗氧化性能的影响[J]. 金属学报, 1998, 34(10): 1084-1088.
[8] 唐兆麟;王福会;吴维. Cr对TiAl金属间化合物高温氧化性能的影响[J]. 金属学报, 1997, 33(10): 1028-1034.
[9] 吴建生;林栋粱. 单晶Nb循环变形过程中疲劳裂纹的萌生及其机制[J]. 金属学报, 1995, 31(2): 90-9.
[10] 贺连龙;叶恒强;徐仁根;杨德庄. TiAl-V-Si合金中Ti_(5)Si_3析出相与基体相的取向关系[J]. 金属学报, 1994, 30(4): 145-149.
[11] 高颖;朱静;蔡其巩. 双相Ti-Al-V金属间化合物层状组织的微观结构研究[J]. 金属学报, 1992, 28(2): 14-18.