Please wait a minute...
金属学报  1999, Vol. 35 Issue (10): 1021-1023     
  论文 本期目录 | 过刊浏览 |
半固态ZA12合金的瞬态流变性能
朱鸣芳 高志强 苏华钦
东南大学机械工程系; 南京 210096
引用本文:

朱鸣芳; 高志强; 苏华钦 . 半固态ZA12合金的瞬态流变性能[J]. 金属学报, 1999, 35(10): 1021-1023 .

全文: PDF(183 KB)  
摘要: 采用自行研制的高温同轴双筒流变仪对半固态ZA12合金的流变性能进行研究, 结果表明. 半固态合金的剪切应力与剪切时间的关系曲线的特征与固相分数和剪切速率有关, 此外, 在稳态条件和瞬态条件下, 半固态合金浆液表现出不同的流体特征.
关键词 半固态合金瞬态流变性能固相分数    
Key words
收稿日期: 1999-03-08     
ZTFLH:  TG146.21  
[1] Yong K P. In: Solidification Processing of Advanced Materi-als, May 29-June 1, 1989, Oiso, Kanagawa, Japan, 181
[2]LapkOwski W, Pictrzyk M. J Mater Proc Technol, 1994; 45:365
[3] Suery M, Martin C L, Salvo L. In: Proc Int Coof on the Pro-cesses of Semi-Solid Alloys and Composites, Sheffield, June,19-21, 1996: 21
[4] Marsh S P, Glicksman M E, Zwillinger D I. In: Giamei AF ed., Modellng of Casting and Welding Processes IV War-rendale, PA: TMS, 1988: 921
[5] Brown S B, Kumar P, Martin C L. ln: Proc 2nd Int Coo f 0nthe Processes of Semi-Solid Alloys and Composites, MIT,Cambridge, Massachusetts, June 10-l2, 1992: 183
[6] Flemings M C, Chen S F, Diewwanit I et al. In: Proc 2ndInt Conf on the Processes of Semi-Solid Alloys and Com-posites, MIT, Cambridge, Massachusetts, June 10-12, 1992:202
[7] Gunasekera J S. In: Proc 2nd Int Conf on the Processes ofSemi-Solid Alloys and Composites, MIT, Cambridge, Mas-sachusetts, June 10-12, 1992: 211
[8] Taha M A, El-MahallaWy N A, Assar A M. J Mater Sci,1988; 23: 1385
[9] Flemings M C. Metall Trans, 1991; 22B: 269
[10] Turng L S, Wang K K. J Mater Sci, 1991; 26: 2173
[1] 侯丹辉, 梁松茂, 陈荣石, 董闯. 砂型铸造Mg-6Al-xZn合金凝固行为及晶粒尺寸*[J]. 金属学报, 2014, 50(5): 601-609.
[2] 张艳菊; 毛卫民; 赵振铎; 刘政 . 半固态A356铝合金的稳态流变性能[J]. 金属学报, 2006, 42(2): 163-166 .
[3] 周全; 杨院生; 唐军立; 胡壮麒 . 直流电流作用下AZ91D镁合金半固态等温处理过程中的组织演变[J]. 金属学报, 2006, 42(1): 28-34 .
[4] 唐靖林; 殷雅俊; 范钦珊; 曾大本 . 液-固温区A356合金剪切速率阶梯变化的瞬态流变行为[J]. 金属学报, 2001, 37(10): 1031-1034 .
[5] 陈晓阳;毛卫民;钟雪友. 剪切速率增稠半固态合金浆料的流变力学模型[J]. 金属学报, 1998, 34(2): 179-183.