金属学报  1998, Vol. 34 Issue (2): 179-183

论文 本期目录 | 过刊浏览 |

剪切速率增稠半固态合金浆料的流变力学模型

陈晓阳;毛卫民;钟雪友

北京科技大学铸造研究所;北京;100083;北京科技大学铸造研究所;北京;100083;北京科技大学铸造研究所;北京;100083

RHEOLOGICAL MECHANICS MODEL OF SHEAR RATE THICKENING THE BEHMIOR OF SEMISOLID SLURRISS

CHEN Xiaoyang;MAO Weimin;ZHONG Xuegou (Institute of Casting; University of Science and Technology Beliing; Beijing 100083)

陈晓阳;毛卫民;钟雪友. 剪切速率增稠半固态合金浆料的流变力学模型[J]. 金属学报, 1998, 34(2): 179-183.
, , . RHEOLOGICAL MECHANICS MODEL OF SHEAR RATE THICKENING THE BEHMIOR OF SEMISOLID SLURRISS[J]. Acta Metall Sin, 1998, 34(2): 179-183.

摘要 参考文献 相关文章 Metrics 全文: PDF(431 KB)   摘要: 半固态合金浆料的本质特性依靠宏观因素．这些因素控制着材料的流变行为，它们又可转化为内变量和外交量．内变量包括因相颗粒的团块化程度、流体粘度、颗粒尺寸、颗粒形貌和颗粒尺寸的分布外变量包括温度和剪切速率．在原来的简单模型上，根据半固态合金浆料的不同特性，得出不同条件下的新模型． 关键词 ： 剪切速率增稠,  半固态合金浆料,  流变模型     Abstract：The constitutive behavior of semisolid slumes depends on a number of macroscopic factors. These factors translate to internal variables and external variables that govern the rheological behavior of the material. Internal variables include a measure of the degree of agglomeration among solid pericles, fluid phase viscosity, particle size, particle morphology, and distribution of particle sizes. External variables are temperature and shear rate. According to the different characters of semisolid slurries, we can give the corresponding new models under the different conditions on the basis of the primary models. Key words： shear rate thickening    semisolid slurry    rheological model 收稿日期: 1998-02-18      基金资助:国家863计划资助！715-012-004 服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 陈晓阳 毛卫民 钟雪友 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1998/V34/I2/179 1Joly P A, Merhraian R.J Mate, Sci 1976; 11: 1393 2Flemings M C.Metall Trans A,1991;22A:957 3Ito Y,Flemings M C,Cornie J A.Nature and Properties of Semi-Solid Materials, Warrendade,PA:TEM, 1992; 3 4Rice J R,J Appl Mech,1970;9:728 5 Alers W, Overbeek J T G.J Col Sci, 1960; 15: 489 6Kumar P,Martin C L;Brown S B.Acta Metall,1994;4:3595 7Frankel N A, Acrivos A. Chem Eng Sci 1967; 22: 847 8Martin C L, Kumar P, Brown S B. Acta Metall, 1994; 42: 3603 9Nguyen T G, Favier D, Suery M. Int J Plast, 1994; 10: 693- [1] 林家骝;朱世根;于震宗. 铸钢在凝固区的流变行为[J]. 金属学报, 1991, 27(5): 110-115. Viewed Full text Abstract Cited   Shared      Discussed