金属学报  1989, Vol. 25 Issue (6): 131-135

论文 本期目录 | 过刊浏览 |

在平行和垂直轧制方向上钛板的屈服应力与R值的定量关系

张德荣

沈阳航空工业学院航空系;副教授;沈阳(110031)

QUANTITATIVE RELATION BETWEEN YIELD STRESS AND R-VALUE ALONG DIRECTIONS PARALLEL AND PERPENDICULAR TO ROLLED Ti PLATE

ZHANG Derong Shenyang Institute of Aeronautical Engineering ZHANG Derong; associate professor; Department of Aeronautics; Shenyang Institute of Aeronautical Engineering; Shenyang 110031

张德荣. 在平行和垂直轧制方向上钛板的屈服应力与R值的定量关系[J]. 金属学报, 1989, 25(6): 131-135.
. QUANTITATIVE RELATION BETWEEN YIELD STRESS AND R-VALUE ALONG DIRECTIONS PARALLEL AND PERPENDICULAR TO ROLLED Ti PLATE[J]. Acta Metall Sin, 1989, 25(6): 131-135.

摘要 参考文献 相关文章 Metrics 全文: PDF(353 KB)   摘要: 实验数据显示,钛板在平行和垂直轧制方向上的屈服应力和R值有如下的关系:若某一方向的R值比另一方向的大,则此方向上的屈服应力也比另一方向的高。本文根据塑性理论导出了一个公式,试图从理论上对此关系加以描述。统计处理表明,此式与实验数据吻合良好,并对此式的适用范围和应用价值进行了简短的讨论。 关键词 ： 钛板,  屈服应力,  R值     Abstract：An attempt was made on the quantitative prediction of the relation-ship batween yield stress and R-value along the directions parallel and perpendicul-ar to rolled Ti plate based on analysis of the previous experimental data. It is sh-own that the yield stress along one direction and another is synchronized withR-value. Based on the theory of plasticity a formula of σ_(1s)/σ_(7s)=[1+1/R_2)/(1+1/R_1)]~(1/2)was proposed. In statistic estimation, the calculated results after the formula are inbetter agreement with the experimental data. The availability of this formula wasbriefly discussed also. Key words： Ti plate    yield stress    R-value 收稿日期: 1989-06-18      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 张德荣 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y1989/V25/I6/131 1 周维贤.TC1钛板的机械性能及其异性情况,西北工业大学科技资料,总字第1059期,1979 2 翟平.TA2M钛板机械性能及各向异性,西北工业大学科技资料,ZHZ8018,1981 3 周维贤.剖面收缩率在评估钛板成形性方面的意义,中国航空学会飞机制造技术学术交流会资料,1988 4 Hill R. The Mathematical Theory of Plasticity. Oxford at the Clarendon Press, 1950: 317--340 5 Slater R A C.王仲仁,袁祖培译.工程塑性理论及其在金属成形中的应用,机械工业出版社’1983:141 6 王仁,熊祝华,黄文彬.塑性力学基础,科学出版社,1982:176 7 Babel H W, Eitman D A, McIver R W. ASM Trans D: J Basic Eng, 1967; 89(1) : 13 8 张德荣.沈阳航空工业学院学报,1987;(1) :29 [1] 陈志永; 张新明; 周卓平 . {110}<111>, {112}<111>和{123}<111>多滑移的屈服应力状态[J]. 金属学报, 2003, 39(1): 17-21 . [2] 朱文辉;周光泉;程经毅. 纳米晶体材料屈服应力与晶粒尺寸的依赖关系[J]. 金属学报, 1996, 32(9): 959-965. [3] 盖秀颖;李家宝;康增桥;王中光;朱永平;李超. 60Mn钢喷丸表面的力学性能[J]. 金属学报, 1996, 32(6): 605-610. [4] 周维贤. 钛板的屈服应力与r值之间的定量关系[J]. 金属学报, 1991, 27(6): 44-49. Viewed Full text Abstract Cited   Shared      Discussed